Filter interviews by
posted on 2 Aug 2017
Top trending discussions
posted on 11 Dec 2023
I applied via Campus Placement and was interviewed in Aug 2024. There was 1 interview round.
The unit of Energy is Joule (J)
The unit of Energy is Joule (J)
Energy can also be measured in kilowatt-hours (kWh)
1 Joule is equal to 1 watt-second
The unit of resistance is Ohm (Ω).
The unit of resistance is represented by the symbol Ω (Ohm).
Resistance is measured in Ohms, named after the German physicist Georg Simon Ohm.
One Ohm is equal to one volt per ampere (1 Ω = 1 V/A).
The unit of current is Ampere (A)
The unit of current is Ampere (A)
Current is the flow of electric charge in a circuit
1 Ampere is equivalent to 1 Coulomb per second
Current is measured using an ammeter
The unit of capacitance is Farad (F)
The unit of capacitance is named after Michael Faraday
1 Farad is equal to 1 Coulomb per Volt
Common multiples of Farad include microfarad (uF) and picofarad (pF)
The unit of power is the watt (W)
The unit of power is the watt (W)
Power is the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Common examples of power units include kilowatts (kW) and horsepower (hp)
The unit of power is the watt (W).
The unit of power is the watt (W)
Power is the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Common examples of power units include kilowatts (kW) and horsepower (hp)
The unit of current is Ampere (A), which measures the rate of flow of electric charge.
The unit of current is Ampere (A)
Current is the rate of flow of electric charge
Commonly represented by the symbol 'I'
1 Ampere is equivalent to 1 Coulomb per second
posted on 25 Oct 2024
I applied via Campus Placement and was interviewed in Sep 2024. There was 1 interview round.
Induction motor operates on the principle of electromagnetic induction, while synchronous motor operates at a constant speed determined by the frequency of the power supply.
Induction motor does not require any external excitation to run, while synchronous motor requires a separate DC power source for excitation.
Induction motor has a slightly lower efficiency compared to synchronous motor.
Synchronous motor is used in ap...
Transformer parts include core, windings, and insulation. It is used to step up or step down voltage in electrical systems.
Transformer parts: core, windings, insulation
Core: provides magnetic path for flux
Windings: primary and secondary coils
Insulation: prevents short circuits
Used to step up or step down voltage in electrical systems
Rotten egg on inverted pen, social media
I applied via Approached by Company and was interviewed in Jul 2024. There was 1 interview round.
The unit of resistance is ohm (Ω), named after German physicist Georg Simon Ohm.
The unit symbol for resistance is Ω
Resistance is measured using an ohmmeter
1 ohm is equal to 1 volt per ampere (V/A)
The unit of current is Ampere (A)
The unit of current is named after the French physicist Andre-Marie Ampere
1 Ampere is defined as the flow of 1 Coulomb of charge per second
Commonly used prefixes for current include milliampere (mA) and microampere (μA)
posted on 28 May 2022
I applied via Recruitment Consulltant and was interviewed in Apr 2022. There were 4 interview rounds.
Planning to work
Before work study
Equipment healthy
I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.
posted on 5 Jan 2021
Transformer losses refer to the energy losses that occur during the operation of a transformer.
Transformer losses include copper losses and iron losses.
Copper losses occur due to the resistance of the transformer windings.
Iron losses, also known as core losses, occur due to hysteresis and eddy currents in the transformer core.
Copper losses can be minimized by using larger conductor sizes and reducing the resistance of ...
Efficiency of transformer is the ratio of output power to input power.
Efficiency is affected by factors such as core losses, winding resistance, and load impedance.
Efficiency can be improved by using high-quality materials, proper design, and regular maintenance.
Efficiency is expressed as a percentage and can range from 50% to 99% depending on the transformer type and application.
Non-sparking equipment and lights are used in hazardous environments to prevent explosions.
Non-sparking tools are made of materials that do not create sparks when struck or rubbed against each other.
Non-sparking lights use LED technology and are enclosed in a housing that prevents sparks from escaping.
These techniques are commonly used in industries such as oil and gas, chemical, and mining.
Examples of non-sparking too...
I applied via Referral and was interviewed before Dec 2019. There was 1 interview round.
Field Operator
12
salaries
| ₹9 L/yr - ₹21.2 L/yr |
Mechanical Technician
11
salaries
| ₹6.2 L/yr - ₹15.3 L/yr |
Electrical Technician
9
salaries
| ₹3.6 L/yr - ₹9 L/yr |
Instrumentation Technician
8
salaries
| ₹4.5 L/yr - ₹15 L/yr |
Lab Technician
6
salaries
| ₹12 L/yr - ₹30.5 L/yr |
Reliance Industries
Indian Oil Corporation
Bharat Petroleum
Hindustan Petroleum