Filter interviews by
Clear (1)
I applied via Referral and was interviewed in May 2024. There was 1 interview round.
Diploma in Electrical Engineering and father and mother
Transformers work on the principle of electromagnetic induction to transfer electrical energy between two or more circuits.
Transformers have two coils of wire, known as primary and secondary coils.
When an alternating current flows through the primary coil, it creates a changing magnetic field.
This changing magnetic field induces a voltage in the secondary coil, transferring electrical energy.
Transformers can step up or...
RCCB is a Residual Current Circuit Breaker that trips when it detects a leakage current, while MCB is a Miniature Circuit Breaker that trips when there is an overload or short circuit.
RCCB protects against electric shock by detecting imbalance in current flow, commonly used in wet areas like bathrooms.
MCB protects against overloads and short circuits, commonly used in residential and commercial buildings.
RCCB has a sen...
P=√3 vi cos¢ 1 ho=746 Watt Full load current in 30 amp
Vccb stands for Vacuum Circuit Breaker. It works on the principle of extinguishing the arc in a vacuum environment.
VCCB uses a vacuum as the arc quenching medium instead of air or oil.
When the contacts of the breaker open, the arc is drawn into the vacuum and extinguished.
This method ensures faster arc extinction and reduces the risk of fire hazards.
VCCBs are commonly used in high voltage applications where quick and r
Miniature Circuit Breakers (MCBs) and relays are commonly used in electrical systems for protection and control.
MCBs are used to protect electrical circuits from overloads and short circuits by automatically switching off the circuit when a fault is detected.
Relays are used to control the operation of electrical circuits by opening or closing contacts based on input signals.
Common types of MCBs include single-pole, dou...
I was interviewed before Mar 2024.
I applied via Walk-in and was interviewed before Nov 2022. There were 2 interview rounds.
Wheels interview questions for designations
I applied via Company Website and was interviewed before Mar 2022. There were 4 interview rounds.
Maintenance work with planning involves creating a schedule and strategy for upkeep and repairs.
Developing a maintenance plan based on equipment needs and usage
Scheduling regular inspections and preventative maintenance
Coordinating with other departments to minimize downtime
Tracking maintenance history and identifying areas for improvement
Using data analysis to optimize maintenance processes
Example: Creating a weekly s...
Get interview-ready with Top Wheels Interview Questions
I applied via Referral and was interviewed before Feb 2022. There was 1 interview round.
Yes, I have knowledge of hydraulic circuits.
I have experience in designing and troubleshooting hydraulic circuits
I am familiar with hydraulic components such as pumps, valves, and actuators
I have worked with hydraulic systems in various industries including manufacturing and construction
I understand the principles of fluid mechanics and how they apply to hydraulic systems
Top trending discussions
I was interviewed before Jul 2016.
My areas of interest include electrical systems, mechanical systems, and preventive maintenance.
Electrical systems: I have a strong interest in troubleshooting and repairing electrical systems, such as motors, control panels, and wiring.
Mechanical systems: I enjoy working with mechanical components, such as pumps, valves, and conveyors. I have experience in maintaining and repairing these systems.
Preventive maintenance...
I applied via Company Website and was interviewed in May 2019. There were 4 interview rounds.
There are several types of valves in instrumentation.
Gate valve
Ball valve
Butterfly valve
Globe valve
Check valve
Diaphragm valve
Needle valve
Plug valve
Pressure relief valve
Safety valve
PT, LT and LVDT are types of sensors used in engineering for measuring pressure, temperature and displacement respectively.
PT stands for Pressure Transducer and is used to measure pressure in various applications such as hydraulic systems, engines, and pipelines.
LT stands for Linear Transducer and is used to measure temperature in various applications such as engines, HVAC systems, and industrial processes.
LVDT stands ...
Calibration of I/P converter involves adjusting the output pressure to match the input signal.
Connect the I/P converter to a pressure source and a signal generator
Adjust the input signal to the desired value
Measure the output pressure and adjust it to match the input signal
Repeat the process at different input signal levels to ensure accuracy
Document the calibration results for future reference
A load cell is a transducer that converts force into an electrical signal. Calibration involves applying known loads and adjusting the output signal.
Load cell measures force or weight
It converts the force into an electrical signal
Calibration involves applying known loads and adjusting the output signal
Calibration can be done using a calibration machine or weights
Calibration should be done regularly to ensure accurate r
I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 3 interview rounds.
They took a aptitude test . In that test they give the questions of math, gk, gi, english, and the tread test.
I applied via Walk-in and was interviewed in Jun 2023. There were 3 interview rounds.
Quantitative Aptitude and Reasoning, English Grammer and Technical
The spanner size required to remove a 12 mm bolt is typically 17 mm.
The spanner size needed is usually 5 mm larger than the bolt size
In this case, a 17 mm spanner would be required to remove a 12 mm bolt
Tapping process is a method of cutting internal threads in a hole with the help of a tool called tap.
Tapping is commonly used in manufacturing to create threaded holes for screws, bolts, and other fasteners.
The tap is rotated and advanced into the hole to cut the threads.
There are different types of taps such as taper tap, plug tap, and bottoming tap.
Tapping can be done manually or with the help of a machine like a tap...
Industry 4.0 refers to the fourth industrial revolution characterized by the integration of digital technologies into manufacturing processes.
Involves the use of technologies such as IoT, AI, big data, and automation to create smart factories
Focuses on interconnected systems that can communicate, analyze data, and make decisions autonomously
Aims to increase efficiency, productivity, and flexibility in manufacturing pro...
MES stands for Manufacturing Execution System, a software system used in manufacturing to track and control production processes.
MES is a computerized system used in manufacturing to manage and monitor production processes on the factory floor.
It helps to track and control the flow of work in a manufacturing operation.
MES can provide real-time data on production, inventory, quality, and other key metrics.
Examples of ME...
The duration of Wheels Maintenance Engineer interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 6 interviews
2 Interview rounds
based on 9 reviews
Rating in categories
Assistant Manager
315
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
171
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
154
salaries
| ₹0 L/yr - ₹0 L/yr |
Graduate Engineer Trainee (Get)
141
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
133
salaries
| ₹0 L/yr - ₹0 L/yr |
Bridgestone India Automotive Products
Ceat Tyres
Apollo Tyres
MRF Tyres