Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Welspun World Team. If you also belong to the team, you can get access from here

Welspun World Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Welspun World Senior Project Engineer Interview Questions, Process, and Tips

Updated 17 Nov 2021

Welspun World Senior Project Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

7 Questions

  • Q1. Type of defects of MS pipes..
  • Ans. 

    Common defects in MS pipes include corrosion, cracks, leaks, and misalignment.

    • Corrosion: Occurs due to exposure to moisture and chemicals, leading to rust and weakening of the pipe.

    • Cracks: Can be caused by stress, improper handling, or manufacturing defects, compromising the structural integrity.

    • Leaks: Result from faulty joints, damaged seals, or pipe degradation, causing fluid or gas to escape.

    • Misalignment: Improper i...

  • Answered by AI
  • Q2. What is SCADA system how to work ..
  • Ans. 

    SCADA stands for Supervisory Control and Data Acquisition. It is a system used to monitor and control industrial processes.

    • SCADA systems collect data from sensors and other devices in real-time

    • The data is then processed and displayed on a human-machine interface (HMI)

    • Operators can use the HMI to monitor and control the process remotely

    • SCADA systems are commonly used in industries such as oil and gas, water treatment, a...

  • Answered by AI
  • Q3. All pipe line .
  • Q4. Density of ci pipes
  • Ans. 

    The density of CI pipes varies based on the size and thickness of the pipe.

    • CI pipes have a density range of 6.9-7.8 g/cm³

    • The density of CI pipes can be calculated using the formula: Density = Mass/Volume

    • The density of CI pipes is affected by factors such as temperature and pressure

    • The density of CI pipes is important for determining their strength and durability

  • Answered by AI
  • Q5. Minimum thickness of OHT Raft
  • Ans. 

    The minimum thickness of OHT Raft depends on various factors such as load capacity, soil type, and seismic activity.

    • The thickness of OHT Raft should be calculated based on the load capacity of the structure.

    • The soil type and seismic activity of the area should also be considered while determining the minimum thickness.

    • The minimum thickness of OHT Raft can vary from project to project depending on the above factors.

    • Cons...

  • Answered by AI
  • Q6. What is difference of ms & DI pipes
  • Ans. 

    MS pipes are made of mild steel while DI pipes are made of ductile iron.

    • MS pipes are cheaper than DI pipes.

    • DI pipes are more durable and have higher tensile strength than MS pipes.

    • DI pipes are used for water supply and sewage systems while MS pipes are used for gas and oil pipelines.

    • DI pipes have a smoother inner surface which reduces friction and improves flow rate.

    • MS pipes are prone to corrosion and require regular m...

  • Answered by AI
  • Q7. Some questions HDPE joint nd lowering

Interview Preparation Tips

Interview preparation tips for other job seekers - Eye contact , simple way talking and nothing special all interview same ..

Interview questions from similar companies

I appeared for an interview in Jul 2020.

Interview Questionnaire 

1 Question

  • Q1. Process parameters, fan flow calculation quality related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Aware about mill specifications
Process parameters flow calculation etc.

I applied via Company Website and was interviewed in May 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. I had been questioned about mechanical maintenance and condition monitoring field

Interview Preparation Tips

Interview preparation tips for other job seekers - Write in your CV only what you know,don't write anything that you can't explain if question arises.Be honest and tell u don't know what you don't .

I applied via Naukri.com and was interviewed in May 2019. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. What is your individual capabilities ?
  • Q2. How is your current position which defines different from others ?
  • Ans. 

    My current position involves leading cross-functional teams and driving technical innovation.

    • I am responsible for leading a team of engineers in developing new products and technologies.

    • I work closely with other departments such as marketing and sales to ensure alignment on project goals.

    • I am involved in setting technical direction and strategy for the team, as well as mentoring junior engineers.

    • I have successfully imp...

  • Answered by AI
  • Q3. Why would you want relocate?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be real and tell truthfully what is your experience belongs to ?

I applied via Recruitment Consultant and was interviewed before Apr 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic P2P Journal Entry, PO line Utilisation & Invoice Overbooking related process etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Easy to crack interview if you are good practical experience with SAP & Basic P2P Journal Entry.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Stripping Ratio, MMR, Mine Management
  • Q2. Drilling and Blasting, Shot sequence, Safety Plan

I applied via Abgcareer and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Math,reasoning and english each 10 question

Round 3 - HR 

(1 Question)

  • Q1. About yourself and salary

Interview Preparation Tips

Interview preparation tips for other job seekers - Its normal and only technical knowledge must

I applied via Newspaper Ad and was interviewed in Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Crystalization, Evaporation,heat exchanger,pump

Interview Preparation Tips

Interview preparation tips for other job seekers - Here is only available unit operation

I applied via Walk-in and was interviewed in May 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Related jobs and my resume
Round 3 - HR 

(1 Question)

  • Q1. Based on facilities and annual package

Interview Preparation Tips

Interview preparation tips for other job seekers - See my updated resume and find out related jobs for my based carrier opportunity.and my developed knowledge and skills for better experience
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2022. There were 5 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Mathematics and general

Round 3 - Technical 

(1 Question)

  • Q1. Related to field
Round 4 - One-on-one 

(1 Question)

  • Q1. Related to HR and technical
Round 5 - One-on-one 

(1 Question)

  • Q1. Related to finalize the process

Welspun World Interview FAQs

What are the top questions asked in Welspun World Senior Project Engineer interview?

Some of the top questions asked at the Welspun World Senior Project Engineer interview -

  1. What is difference of ms & DI pi...read more
  2. What is SCADA system how to work...read more
  3. Type of defects of MS pipe...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

UltraTech Cement Interview Questions
4.2
 • 593 Interviews
JK Cement Interview Questions
4.1
 • 267 Interviews
Grasim Industries Interview Questions
4.0
 • 213 Interviews
ACC Interview Questions
3.9
 • 192 Interviews
Ambuja Cements Interview Questions
3.9
 • 112 Interviews
Star Cement Interview Questions
4.0
 • 65 Interviews
HIL Limited Interview Questions
4.1
 • 61 Interviews
India Cements Interview Questions
3.8
 • 49 Interviews
View all
Assistant Manager
163 salaries
unlock blur

₹3.6 L/yr - ₹12.5 L/yr

Officer
47 salaries
unlock blur

₹2.8 L/yr - ₹7 L/yr

Manager
43 salaries
unlock blur

₹7 L/yr - ₹21.5 L/yr

Engineer
43 salaries
unlock blur

₹2.4 L/yr - ₹7.8 L/yr

Assistant General Manager
37 salaries
unlock blur

₹11 L/yr - ₹30 L/yr

Explore more salaries
Compare Welspun World with

UltraTech Cement

4.2
Compare

JK Cement

4.1
Compare

Grasim Industries

4.0
Compare

ACC

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview