Filter interviews by
I applied via Referral and was interviewed in Apr 2021. There was 1 interview round.
Yes, I have experience in handling all types of LV HV panel fixing and substation cable joining works.
I have worked on various types of LV HV panels and substation cable joining projects.
I am familiar with the safety protocols and procedures involved in such works.
I have experience in troubleshooting and resolving issues related to panel fixing and cable joining.
I have worked with different types of cables and connecto...
I applied via Company Website and was interviewed in Mar 2024. There was 1 interview round.
Ardhamatic,reasoning
Full stack Java Developer
I applied via Company Website and was interviewed in Jun 2022. There was 1 interview round.
A dropout switch is an electrical switch that opens when the voltage drops below a certain level.
It is used to protect electrical equipment from damage due to low voltage.
It can be manually or automatically reset.
Examples include low voltage disconnect switches and thermal overload switches.
It is commonly used in battery systems to prevent over-discharge.
It is also used in power distribution systems to prevent damage t
A diode is an electronic component that allows current to flow in only one direction.
It has two terminals, an anode and a cathode.
It is commonly used in rectifiers to convert AC to DC.
It can also be used as a voltage regulator or a signal modulator.
It is made of semiconductor materials such as silicon or germanium.
It has a forward voltage drop that varies depending on the material and temperature.
HRC fuse stands for High Rupturing Capacity fuse. It is a type of fuse that can withstand high fault currents.
HRC fuse is designed to protect electrical equipment from overcurrents.
It has a high breaking capacity and can interrupt high fault currents without causing damage to the equipment.
HRC fuse is commonly used in industrial and commercial applications.
It is available in different sizes and ratings to suit differen...
The RPM of a 4 pole motor is determined by the frequency of the power supply and the number of poles.
The RPM of a 4 pole motor is directly proportional to the frequency of the power supply.
The RPM of a 4 pole motor is inversely proportional to the number of poles.
For example, a 4 pole motor connected to a 60 Hz power supply will have an RPM of approximately 1800.
If the power supply frequency is increased to 120 Hz, the...
Yes, 10 kW is equal to 13.41 HP.
1 kW = 1.34 HP
Therefore, 10 kW = 10 x 1.34 = 13.41 HP
Conversion formula: HP = kW x 1.34
An isolator is an electrical switch that isolates a part of the circuit from the rest for maintenance or safety purposes.
Isolators are used to disconnect a circuit from the power source.
They are often used in high voltage applications.
Isolators are different from circuit breakers or fuses, as they do not provide protection against overloads or short circuits.
They are commonly used in industrial settings and power distr...
DC voltage is a constant voltage while AC voltage changes direction periodically.
DC voltage is a steady voltage that flows in one direction only
AC voltage changes direction periodically and has a frequency measured in Hertz
DC voltage is commonly used in batteries and electronic devices
AC voltage is used in household power outlets and electrical grids
A motor's speed can be controlled by a variable frequency drive (VFD).
A VFD can adjust the frequency of the electrical power supplied to the motor, which in turn controls its speed.
VFDs are commonly used in industrial settings to control the speed of motors powering machinery.
VFDs can also improve energy efficiency by reducing the amount of power consumed by the motor.
Other methods of controlling motor speed include us...
Reasoning , mathematics
Behaviour refers to the way in which a person or animal acts or conducts themselves in response to a particular situation or stimulus.
Behaviour is influenced by genetics, environment, and past experiences.
It can be observed and measured through actions, reactions, and responses.
Behaviour can be categorized as either innate (instinctual) or learned.
Examples of behaviour include aggression, shyness, curiosity, and friend
The best method in power transfers is through high voltage transmission lines.
High voltage transmission lines are more efficient in transferring power over long distances.
Using transformers to step up the voltage before transmission and step down the voltage at the receiving end helps minimize power loss.
HVDC (High Voltage Direct Current) transmission is another efficient method for long distance power transfers.
Smart ...
Current is the flow of electric charge through a conductor.
Current is measured in Amperes (A)
It is the rate of flow of electric charge
Current can be either direct current (DC) or alternating current (AC)
Examples: A light bulb connected to a power source has current flowing through it
In a circuit, current flows from the positive terminal of the voltage source to the negative terminal
Methods to convert inverter include pulse width modulation, sine wave modulation, and square wave modulation.
Pulse width modulation (PWM) is a common method used to convert inverter signals by varying the width of the pulses.
Sine wave modulation involves generating a sine wave signal to mimic the output of an inverter.
Square wave modulation produces a square wave output by switching between high and low voltage levels.
...
I applied via Recruitment Consulltant and was interviewed before Oct 2020. There was 1 interview round.
I have 3 years of experience working as an Electrical Engineer in a power distribution company.
Designed electrical systems for new construction projects
Performed regular maintenance on electrical equipment
Troubleshooted and repaired electrical issues in a timely manner
I applied via Walk-in and was interviewed in May 2024. There were 2 interview rounds.
The first thing to do in case of a hazard is to ensure the safety of yourself and others.
Assess the situation to determine the nature and extent of the hazard.
Alert others in the vicinity about the hazard.
Follow safety protocols and procedures to mitigate the hazard.
Contact emergency services if necessary.
Evacuate the area if instructed to do so.
Check for clogs in the fuel line, inspect the injector for damage, clean or replace the injector if necessary.
Inspect the fuel line for any clogs or blockages
Check the injector for any damage or malfunction
Clean the injector using appropriate tools and techniques
If cleaning doesn't work, consider replacing the injector
Ensure proper fuel flow and pressure to the injector
Earth leakage can be detected using a residual current device (RCD) or ground fault circuit interrupter (GFCI).
Earth leakage can be detected by measuring the difference in current between the live and neutral wires in a circuit.
A residual current device (RCD) or ground fault circuit interrupter (GFCI) can be used to detect earth leakage and quickly disconnect the power supply to prevent electric shock.
Regular testing o...
I applied via Approached by Company and was interviewed before Apr 2023. There were 3 interview rounds.
Worst worst worst Test is Nothings
The interviewer may have made a mistake or technical issue with the question.
It seems like the interviewer may have accidentally repeated the word 'worst' multiple times.
You can politely ask for clarification or confirmation on the question to ensure you understand it correctly.
Remain calm and composed while addressing the issue to show your professionalism.
Provide a thoughtful response based on your interpretation of
The worst experience I had was when I accidentally caused a power outage in a large building during a critical event.
Accidentally causing a power outage in a large building
During a critical event
Dealing with the aftermath and fixing the issue quickly and efficiently
The question seems to be asking about the candidate's experience with handling waste in an electrical technician role.
Discussing proper disposal methods for electronic waste
Explaining the importance of recycling materials in the field
Sharing experiences with hazardous waste management in electrical work
I applied via Job Fair and was interviewed in Mar 2023. There were 2 interview rounds.
based on 1 review
Rating in categories
Project Engineer
6
salaries
| ₹1.5 L/yr - ₹6 L/yr |
Electrical Site Engineer
6
salaries
| ₹0.8 L/yr - ₹12 L/yr |
Project Manager
5
salaries
| ₹18 L/yr - ₹58 L/yr |
Electrical Engineer
5
salaries
| ₹1.2 L/yr - ₹10.2 L/yr |
Engineer
4
salaries
| ₹12 L/yr - ₹18 L/yr |
ABB
Siemens
BHEL
Schneider Electric