Filter interviews by
I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.
Bearings are used to reduce friction between two moving parts. There are several types of bearings.
Bearings are used to support and reduce friction between two moving parts
They come in different types such as ball bearings, roller bearings, and plain bearings
Ball bearings are used in applications with low load and high speed
Roller bearings are used in applications with high load and low speed
Plain bearings are used in ...
Gearbox is a mechanical device that transmits power from an engine to the wheels by changing the speed and torque of the output shaft.
It provides torque multiplication and speed reduction.
It allows the engine to operate at its most efficient speed.
It enables the vehicle to move at different speeds and climb hills.
It protects the engine and transmission from damage by absorbing shock loads.
Types of gearbox include manua...
Top trending discussions
I applied via Recruitment Consulltant and was interviewed before Jan 2023. There was 1 interview round.
Different types of reactors include batch reactors, continuous stirred tank reactors, plug flow reactors, and fluidized bed reactors.
Batch reactors: Used for small-scale production or research purposes.
Continuous stirred tank reactors: Commonly used in chemical and biochemical industries.
Plug flow reactors: Ideal for reactions with high conversion rates and minimal side reactions.
Fluidized bed reactors: Suitable for re...
A vacuum is a space devoid of matter. I have used a rotary vane vacuum pump.
A vacuum is a region with no particles or gas molecules.
It is created by removing air or other gases from a sealed container.
Vacuum pumps are used to create and maintain a vacuum.
I have used a rotary vane vacuum pump, which uses rotating vanes to create a vacuum.
This type of pump is commonly used in various applications, such as in HVAC systems
I have used the Single-stage ejector system and the Multi-stage ejector system.
Single-stage ejector system: This system uses a single ejector stage to create a vacuum or low-pressure environment. It is commonly used in applications such as vacuum cleaners and air conditioning systems.
Multi-stage ejector system: This system uses multiple ejector stages in series to achieve higher levels of vacuum or lower pressures. It ...
posted on 24 Aug 2023
I applied via Company Website and was interviewed in Jul 2023. There were 2 interview rounds.
PASAV stands for Pressure Actuated Safety and Automatic Valve. It is used to control the flow of fluids in a system based on pressure levels.
PASAV is a type of valve used in mechanical systems.
It automatically opens or closes based on the pressure levels in the system.
PASAV helps in maintaining safe pressure levels in the system to prevent damage or accidents.
Example: PASAVs are commonly used in hydraulic systems to re
To work in open spanner, place the spanner on the nut or bolt and turn it in the desired direction.
Select the correct size of open spanner for the nut or bolt
Place the open end of the spanner on the nut or bolt
Turn the spanner in the desired direction to loosen or tighten the nut or bolt
Ensure the spanner is securely placed on the nut or bolt to avoid slipping
Types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding uses a wire electrode and shielding gas to create a strong bond.
TIG welding uses a tungsten electrode and inert gas for precise and clean welds.
Stick welding uses a consumable electrode coated in flux to create a strong bond.
Flux-cored welding uses a tubular wire filled with flux for outdoor and windy conditions.
posted on 2 Jan 2022
I applied via Referral and was interviewed before Jan 2021. There were 3 interview rounds.
Types of valves, mechanical seal, steam trap
Types of valves: gate valve, globe valve, ball valve, butterfly valve
Mechanical seal: used to prevent leakage in pumps and other rotating equipment
Steam trap: used to remove condensate and non-condensable gases from steam systems
posted on 2 Oct 2022
I applied via Naukri.com and was interviewed in Apr 2022. There were 3 interview rounds.
posted on 7 Dec 2021
I appeared for an interview before Dec 2020, where I was asked the following questions.
I've had valuable learning experiences, both positive and negative, that have shaped my growth as a Production Engineer.
Positive: Collaborated on a cross-functional team project that improved production efficiency by 15%.
Negative: Faced challenges with outdated machinery, which taught me the importance of advocating for upgrades.
Positive: Attended a workshop on lean manufacturing principles that enhanced my problem-sol...
LEL of ethanol is 3.3% by volume; controlling measures include ventilation, monitoring, and proper storage.
LEL of ethanol is 3.3% by volume in air.
Proper ventilation is essential to dilute flammable vapors.
Use of gas detectors to monitor ethanol concentration.
Implementing explosion-proof equipment in production areas.
Regular training for employees on handling flammable materials.
LSI (Latent Semantic Indexing) is a technique for analyzing relationships between terms and concepts in text data.
LSI helps in improving search accuracy by understanding context and meaning.
It uses mathematical techniques like Singular Value Decomposition (SVD) to reduce dimensions.
Example: In document retrieval, LSI can match documents with similar meanings even if they use different terms.
LSI is often used in natural...
I seek to join your organization for growth, innovation, and a chance to make a meaningful impact in production engineering.
Desire for a more dynamic work environment where I can contribute to innovative projects.
Opportunity to work with cutting-edge technology that your organization is known for.
A chance to be part of a smaller team where my contributions can have a more direct impact.
Looking for a culture that emphas...
I excel in problem-solving and teamwork, but I sometimes struggle with time management under tight deadlines.
Strength: Strong analytical skills - I successfully optimized a production line, increasing efficiency by 20%.
Strength: Excellent communication - I effectively collaborate with cross-functional teams to ensure project alignment.
Weakness: Time management - I occasionally underestimate the time needed for tasks, b...
I've grown in technical skills, teamwork, and problem-solving abilities over the past three years.
Enhanced technical skills: I learned advanced manufacturing techniques, such as lean manufacturing and Six Sigma, improving efficiency in projects.
Improved teamwork: Collaborated on cross-functional teams, leading to successful project completions and stronger relationships with colleagues.
Stronger problem-solving: Develop...
Digitalization enhances efficiency through technology; I saved 5 crore by optimizing production processes using data analytics.
Implemented IoT sensors to monitor machine performance in real-time, reducing downtime by 20%.
Utilized data analytics to identify bottlenecks in the production line, leading to a 15% increase in throughput.
Automated inventory management, decreasing excess stock costs and saving approximately 2 ...
A lighthouse is a tall structure that emits light to guide maritime navigation, ensuring safe passage for ships.
Provides a visual reference point for sailors, helping them navigate safely.
Helps in identifying dangerous coastlines, reefs, and safe entry points to harbors.
Often equipped with sound signals for foggy conditions, enhancing safety.
Examples include the famous Eddystone Lighthouse in the UK and the Statue of L
An RC certificate verifies compliance with safety standards, while an RC logo indicates certification status visually.
RC stands for 'Registration Certificate', which is issued to confirm that a product meets specific regulatory standards.
An RC certificate is a formal document, while an RC logo is a visual representation of that certification.
For example, an RC certificate for a toy ensures it is safe for children, whil...
RC certification includes various clauses and codes to ensure compliance and safety in production processes.
RC certification typically includes around 10 clauses that cover various aspects of production.
Examples of clauses include: Management Responsibility, Resource Management, and Product Realization.
Each clause may have specific codes that detail requirements for compliance.
For instance, the Management Responsibilit...
My greatest achievement was leading a project that improved production efficiency by 30%, enhancing both output and team morale.
Identified inefficiencies in the production line through data analysis.
Implemented lean manufacturing principles to streamline processes.
Led a cross-functional team to foster collaboration and innovation.
Conducted training sessions to upskill team members on new practices.
Achieved a 30% increa
My greatest skill is problem-solving, honed through hands-on experience and continuous learning in engineering projects.
Developed analytical skills through complex project simulations in university.
Enhanced troubleshooting abilities while working on production line optimizations.
Utilized root cause analysis techniques to resolve equipment failures, improving uptime by 20%.
Participated in cross-functional teams, fosteri
I aim to enhance my project management and data analysis skills to improve efficiency and decision-making in production processes.
Project Management: I want to learn advanced methodologies like Agile and Lean to streamline production workflows.
Data Analysis: Improving my proficiency in tools like Excel and Python for better data-driven decision-making.
Communication Skills: Enhancing my ability to convey technical infor...
I applied via Naukri.com and was interviewed before Sep 2021. There was 1 interview round.
I appeared for an interview before Mar 2024, where I was asked the following questions.
posted on 12 Oct 2022
The plant is a manufacturing facility that produces products through a series of processes.
The plant has multiple production lines that operate simultaneously
Raw materials are received and stored in the warehouse before being processed
The production process involves mixing, heating, cooling, and packaging
Quality control checks are performed at various stages of the process
Finished products are stored in the finished go
based on 6 reviews
Rating in categories
Junior Engineer
38
salaries
| ₹2 L/yr - ₹3.5 L/yr |
Assistant Manager
27
salaries
| ₹4.2 L/yr - ₹9.6 L/yr |
Mechanical Engineer
20
salaries
| ₹3 L/yr - ₹5.4 L/yr |
Graduate Engineer Trainee (Get)
15
salaries
| ₹1.5 L/yr - ₹2.6 L/yr |
Shift Incharge
14
salaries
| ₹3 L/yr - ₹6 L/yr |
Sheenlac Paints
Deepak Fertilisers and Petrochemicals
Laxmi Organic Industries
Meghmani Organics