Upload Button Icon Add office photos

Filter interviews by

Ventech (India) Hvac Site Engineer Interview Questions and Answers

Updated 27 Jun 2023

Ventech (India) Hvac Site Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Basic hvac systems Ventilation Heat load Vrv diagram
  • Ans. 

    Basic HVAC systems include ventilation, heat load calculations, and VRV diagrams.

    • Ventilation is the process of exchanging indoor air with outdoor air to improve air quality.

    • Heat load calculations are used to determine the amount of heating or cooling needed for a space.

    • VRV (Variable Refrigerant Volume) diagrams show the flow of refrigerant in a system with multiple indoor units connected to one outdoor unit.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Good company for beginners

Interview questions from similar companies

I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Please explain about your profile

Interview Preparation Tips

Interview preparation tips for other job seekers - First of all be free to attend the interview.
Be bold in your explanations.
Questions mainly fall from your profile explanation.

Try to tell what you have worked with.

Interview Questionnaire 

2 Questions

  • Q1. How can fill you this organization?
  • Q2. What your parents do?
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Write NC program PFMEA details and knowledge of depth to proportion GD&T Past company experience and technical knowledge, cast reduction, process knowledge
Round 3 - One-on-one 

(1 Question)

  • Q1. Technical round 2. Interviewed by ME head. Capacity calculation,line balancing,PPAP,APQP,MSD,machine selaction, process selection.

Interview Preparation Tips

Interview preparation tips for other job seekers - I you have too technical knowledge you will get the job definitely.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Problem and route cause

Round 3 - One-on-one 

(1 Question)

  • Q1. Process and risk assessment
Round 4 - Technical 

(1 Question)

  • Q1. Quality tools and assurance activities

Interview Preparation Tips

Interview preparation tips for other job seekers - Be strong with what you have put in your resume
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Company name, why leave where, about work experience
Round 3 - Technical 

(4 Questions)

  • Q1. About Programming
  • Q2. 5S, why why analysis, kaizen, 4m, oee
  • Q3. Fixtures setup, About WPC
  • Q4. About manpower handling, production planning

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare proper, add your resume, who you know
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Mar 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Question about job profile like SPC ,MSA.FMEA etc
Round 3 - One-on-one 

(1 Question)

  • Q1. Salary discussion
Round 4 - Technical 

(1 Question)

  • Q1. Final round with plant head
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. How to handle customer complain used quality tool
  • Ans. 

    Use quality tools like Pareto chart, fishbone diagram, and 5 Whys to analyze and address customer complaints.

    • Identify the root cause of the complaint using tools like fishbone diagram.

    • Prioritize the issues using a Pareto chart to focus on the most critical problems first.

    • Use the 5 Whys technique to dig deeper into the root cause of the complaint.

    • Implement corrective actions based on the analysis to prevent similar comp

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. 7qc tools & describe it as per example
  • Ans. 

    7QC tools are a set of quality control tools used for process improvement and problem-solving.

    • Check sheet: Used to collect and analyze data, such as tallying defects in a manufacturing process.

    • Pareto chart: Helps identify the most significant factors contributing to a problem, based on the 80/20 rule.

    • Cause and effect diagram (Fishbone diagram): Used to identify and analyze potential causes of a problem.

    • Histogram: Repre...

  • Answered by AI
  • Q2. Difference between QA & QC
  • Ans. 

    QA focuses on preventing defects in the process, while QC focuses on identifying defects in the product.

    • QA is process oriented, focusing on preventing defects by improving processes and procedures.

    • QC is product oriented, focusing on identifying defects through testing and inspection.

    • QA involves activities like reviews, audits, and process improvements.

    • QC involves activities like testing, inspections, and quality contro...

  • Answered by AI
  • Q3. Define of FMEA TYPE
  • Ans. 

    FMEA stands for Failure Modes and Effects Analysis, a systematic method for identifying and preventing potential failures in a system.

    • FMEA is a structured approach to identifying and prioritizing potential failure modes in a system.

    • It involves analyzing the potential effects of these failures and developing mitigation strategies.

    • FMEA helps in improving the reliability, safety, and quality of a system or process.

    • There a...

  • Answered by AI
  • Q4. Process & product audit type of poka yoke
  • Ans. 

    Process & product audit type of poka yoke ensures errors are prevented during audits.

    • Poka yoke in process audit involves using checklists to ensure all steps are followed correctly

    • Poka yoke in product audit involves using sensors to detect defects before they occur

    • Examples include using color-coded labels to prevent mix-ups in audits

  • Answered by AI
  • Q5. 8D Capa, 5S, pervios company job profile and DWM
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About drive and working
  • Q2. About plc and working
Round 2 - HR 

(2 Questions)

  • Q1. About family and members
  • Q2. Salary structure and expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - Not tough interview process

Ventech (India) Interview FAQs

How many rounds are there in Ventech (India) Hvac Site Engineer interview?
Ventech (India) interview process usually has 2 rounds. The most common rounds in the Ventech (India) interview process are Resume Shortlist and One-on-one Round.

Tell us how to improve this page.

Ventech (India) Hvac Site Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Yazaki Interview Questions
3.8
 • 135 Interviews
JK Tyres Interview Questions
3.6
 • 96 Interviews
Aptiv Interview Questions
3.5
 • 96 Interviews
Krishna Maruti Interview Questions
4.0
 • 93 Interviews
Valeo Interview Questions
4.0
 • 90 Interviews
Delphi TVS Interview Questions
3.9
 • 83 Interviews
Lucas-TVS Interview Questions
3.9
 • 72 Interviews
View all

Ventech (India) Hvac Site Engineer Reviews and Ratings

based on 2 reviews

3.0/5

Rating in categories

4.0

Skill development

3.5

Work-life balance

4.5

Salary

4.0

Job security

3.5

Company culture

4.5

Promotions

3.5

Work satisfaction

Explore 2 Reviews and Ratings
Software Engineer
84 salaries
unlock blur

₹3.5 L/yr - ₹8.5 L/yr

Softwaretest Engineer
55 salaries
unlock blur

₹3.5 L/yr - ₹7.5 L/yr

Information Technology Recruiter
50 salaries
unlock blur

₹2.3 L/yr - ₹4.2 L/yr

Software Developer
50 salaries
unlock blur

₹3 L/yr - ₹8.8 L/yr

Devops Engineer
47 salaries
unlock blur

₹4 L/yr - ₹13 L/yr

Explore more salaries
Compare Ventech (India) with

Yazaki

3.8
Compare

Delphi TVS

3.9
Compare

JK Tyres

3.6
Compare

Lucas-TVS

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview