Upload Button Icon Add office photos

Vacmet India

Compare button icon Compare button icon Compare

Filter interviews by

Vacmet India Service Engineer Technician Interview Questions and Answers

Updated 4 Dec 2022

Vacmet India Service Engineer Technician Interview Experiences

1 interview found

I applied via Job Portal

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - Security system cctv fire alarm 

(3 Questions)

  • Q1. Cctv installation attend
  • Q2. Cctv installation attend
  • Q3. Cctv installation attend all system
Round 3 - Technical 

(2 Questions)

  • Q1. Technical cctv installation
  • Q2. Access control system

Interview Preparation Tips

Interview preparation tips for other job seekers - Interest job .I am a good boy . please joining job

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Nov 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. All basic of instrument,PLC, electrical, power etc are asked.
  • Q2. Please go through profibus basics, encoders, techometer, power consumption of plant & related, AC & DC Drives, Motor, Energy saving etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Be clam, intervers are very polite & excellent in nature.
At COSMO all are good & very supportive.
Very good place to work.

I applied via Approached by Company and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(4 Questions)

  • Q1. What is preventive maintenance
  • Ans. 

    Preventive maintenance is a proactive approach to maintenance that aims to prevent equipment failure before it occurs.

    • Regularly scheduled inspections and maintenance

    • Replacing worn or damaged parts before they cause a breakdown

    • Cleaning and lubricating equipment to prevent wear and tear

    • Keeping accurate records of maintenance activities

    • Examples: changing the oil in a car, replacing air filters in HVAC systems, inspecting

  • Answered by AI
  • Q2. What do you know about sap pm module
  • Ans. 

    SAP PM module is used for managing maintenance activities of an organization.

    • PM stands for Plant Maintenance

    • It helps in planning and scheduling maintenance tasks

    • Tracks equipment and maintenance history

    • Provides cost analysis and reporting

    • Integrates with other SAP modules like MM and FI

    • Example: A manufacturing company can use SAP PM to schedule maintenance of their production equipment

  • Answered by AI
  • Q3. What are the utilities equipments you handled
  • Ans. 

    I have handled various utilities equipments including generators, chillers, HVAC systems, and water treatment plants.

    • Generators: responsible for maintenance and repair of diesel and gas generators

    • Chillers: handled installation and maintenance of air-cooled and water-cooled chillers

    • HVAC systems: managed repair and maintenance of heating, ventilation, and air conditioning systems

    • Water treatment plants: responsible for op...

  • Answered by AI
  • Q4. What are the various types of bearings
  • Ans. 

    Bearings are used to reduce friction between two moving parts. There are several types of bearings.

    • Plain bearings

    • Rolling element bearings

    • Jewel bearings

    • Fluid bearings

    • Magnetic bearings

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be technically well preparedness and be hardwork and be competent and be proactive in all activities

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. HR asked like your salary, company location expected salary and resion for change etc.
Round 3 - Technical 

(1 Question)

  • Q1. Questions like your profile which is mentioned on your resume

Interview Preparation Tips

Interview preparation tips for other job seekers - Good communication skills, don't fear during interview,and technical knowledge and confident

I applied via Campus Placement and was interviewed in Jul 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. What is your aim in this company?
  • Q2. What is your thought about this company & what you can handle any problem in the company's work.
  • Ans. 

    I am impressed with the company's reputation and believe I have the skills to handle any problem in their work.

    • I have researched the company and am impressed with their track record and positive reviews.

    • I have a strong background in problem-solving and have successfully resolved complex issues in my previous roles.

    • I am confident in my ability to adapt to new challenges and learn quickly to address any problem that may ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - We are believe in your self confidence .

Interview Questionnaire 

2 Questions

  • Q1. Most of questions are asking releted to measurements in mm and cm because of pouch making industry
  • Q2. Technical questions also related to b.tech ,diploma and iti

Interview Preparation Tips

Interview preparation tips for other job seekers - This interview was a technical one but The interviewer wanted to test both my knowledge and communication skills.

I applied via LinkedIn and was interviewed before Apr 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. For EBM releted process and operations

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep growing your knowledge everyday

I appeared for an interview in Nov 2016.

Interview Questionnaire 

1 Question

  • Q1. Where you see yourself after 5 years?
  • Ans. 

    In 5 years, I see myself leading a team of engineers, implementing innovative solutions, and contributing to the growth of the organization.

    • Leading a team of engineers in executing projects

    • Implementing innovative solutions to improve efficiency

    • Contributing to the growth and success of the organization

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Its easy
Tips: Its easy, just know basic maths and try to improve your calculation speed
Duration: 1 hour

Round: Group Discussion
Experience: bit competitive since everyone knew the topic
Tips: read news paper and relevant articles
Duration: 30 minutes

Skills: Technical Skills, Communication And Confidence
College Name: NIT Calicut

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All questions was related to my key skills and related to work.

Interview Preparation Tips

Interview preparation tips for other job seekers - Give answers properly and straight no need to over explain , try to give all answers correctly if you don't the answer then simply say I don't know thats it.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Dec 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Name asking and last company regination reason
  • Q2. Last company ctc
  • Ans. 

    My last company's CTC was $60,000 per year.

    • My last company offered a competitive salary package of $60,000 per year.

    • The CTC included base salary, bonuses, and benefits.

    • I was satisfied with the compensation package at my previous company.

  • Answered by AI
Round 2 - Technical 

(3 Questions)

  • Q1. How to control in manual oil pump and burners
  • Ans. 

    To control manual oil pump and burners, follow proper maintenance procedures, adjust settings as needed, and monitor performance regularly.

    • Regularly inspect and maintain the oil pump and burners to ensure they are functioning properly

    • Adjust the settings on the oil pump and burners as needed to achieve the desired output

    • Monitor the performance of the oil pump and burners regularly to identify any issues or inefficiencie...

  • Answered by AI
  • Q2. How to changeover pumps in case of emergency time . How to handle furnace operation.
  • Ans. 

    To changeover pumps in case of emergency, follow proper shutdown procedures, switch to backup pump, and restart system. For furnace operation, ensure proper ventilation, monitor temperature, and follow safety protocols.

    • Follow proper shutdown procedures for the affected pump to prevent damage.

    • Switch to the backup pump to maintain continuous operation.

    • Restart the system and monitor for any abnormalities or issues.

    • For fur...

  • Answered by AI
  • Q3. How to maintain glass level
  • Ans. 

    Maintaining glass level involves regular monitoring, proper cleaning, and adjusting as needed.

    • Regularly check the glass level to ensure it is at the desired level

    • Clean the glass regularly to prevent build-up or obstruction

    • Adjust the glass level as needed based on the specific requirements of the system

    • Use appropriate tools and equipment for maintenance tasks

    • Train staff on proper maintenance procedures to ensure consist

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Ok job was good but management is very poor

Vacmet India Interview FAQs

How many rounds are there in Vacmet India Service Engineer Technician interview?
Vacmet India interview process usually has 3 rounds. The most common rounds in the Vacmet India interview process are Resume Shortlist and Technical.
What are the top questions asked in Vacmet India Service Engineer Technician interview?

Some of the top questions asked at the Vacmet India Service Engineer Technician interview -

  1. Cctv installation attend all sys...read more
  2. Cctv installation att...read more
  3. Technical cctv installat...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Uflex Interview Questions
3.8
 • 109 Interviews
Cosmo Films Interview Questions
3.7
 • 34 Interviews
Balmer Lawrie Interview Questions
3.8
 • 27 Interviews
Alpla Interview Questions
3.9
 • 27 Interviews
EPL Limited Interview Questions
3.9
 • 24 Interviews
TCPL Packaging Interview Questions
4.0
 • 15 Interviews
View all
Shift Engineer
56 salaries
unlock blur

₹2.4 L/yr - ₹6 L/yr

Senior Executive
33 salaries
unlock blur

₹3.5 L/yr - ₹8 L/yr

Assistant Manager
26 salaries
unlock blur

₹6.2 L/yr - ₹16.5 L/yr

Senior Engineer
25 salaries
unlock blur

₹5.2 L/yr - ₹9.5 L/yr

Executive
25 salaries
unlock blur

₹2.5 L/yr - ₹9.3 L/yr

Explore more salaries
Compare Vacmet India with

Uflex

3.8
Compare

EPL Limited

3.9
Compare

Jindal Poly Films

3.6
Compare

Hindusthan National Glass

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview