Upload Button Icon Add office photos

Filter interviews by

United Industries Quality Line Inspector Interview Questions and Answers

Updated 24 Feb 2024

United Industries Quality Line Inspector Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Ask about the prior knowledge about the working domain

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(6 Questions)

  • Q1. 7 types of qc tools
  • Ans. 

    7 QC tools are used for quality control in manufacturing. They are simple and effective tools to identify and solve problems.

    • Check sheets - used to collect data and analyze it

    • Pareto charts - used to identify the most frequent problems

    • Histograms - used to show the distribution of data

    • Cause-and-effect diagrams - used to identify the root cause of a problem

    • Flowcharts - used to show the steps in a process

    • Control charts - u...

  • Answered by AI
  • Q2. What is FMEA,what are the 5s,cp vs cps different
  • Ans. 

    FMEA is a risk assessment tool used to identify and mitigate potential failures. 5S is a workplace organization method. CP and CPS are statistical process control measures.

    • FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identifying and mitigating potential failures in a process or product.

    • 5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing,...

  • Answered by AI
  • Q3. What is the ctq and ctc
  • Ans. 

    CTQ stands for Critical to Quality and CTC stands for Critical to Customer.

    • CTQ is a measurable characteristic of a product or process that is important to the customer.

    • CTC is a measurable characteristic of a product or process that directly impacts customer satisfaction.

    • Identifying CTQs and CTCs helps in improving the quality of the product or process.

    • Examples of CTQs and CTCs include product reliability, on-time deliv...

  • Answered by AI
  • Q4. What are the different gauges
  • Ans. 

    Gauges are instruments used to measure various physical quantities. There are different types of gauges for different purposes.

    • Pressure gauges measure pressure of fluids or gases

    • Temperature gauges measure temperature of substances

    • Thickness gauges measure thickness of materials

    • Wire gauges measure diameter of wires

    • Bore gauges measure diameter of holes

    • Thread gauges measure pitch and diameter of screws

    • Fuel gauges measure f

  • Answered by AI
  • Q5. What are the instrument handling
  • Ans. 

    Instrument handling refers to the proper use, care, and maintenance of tools and equipment used in a particular field.

    • Properly clean and sterilize instruments before and after use

    • Handle instruments with care to prevent damage or contamination

    • Store instruments in a safe and organized manner

    • Regularly inspect instruments for wear and tear

    • Follow manufacturer's instructions for use and maintenance

    • Examples: surgical instrume

  • Answered by AI
  • Q6. Do you know the GD&T symbols
  • Ans. 

    Yes, I am familiar with GD&T symbols.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • It is a system of symbols used to specify the dimensions and tolerances of a part

    • Examples of symbols include concentricity, perpendicularity, and flatness

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Lakshmi Machine Works Junior Engineer interview:
  • Quality Control
Interview preparation tips for other job seekers - Personal details, certificate verification, experience of feeled , projects
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
Selected Selected
  • Q1. Which material marking cylinder
  • Ans. 

    Material marking cylinders are tools used for marking or engraving materials in various engineering applications.

    • Used in manufacturing for marking parts with identification numbers.

    • Commonly made from durable materials like steel or aluminum.

    • Examples include engraving cylinders for metal parts or rubber stamps for softer materials.

    • Can be used in automated systems for high-speed marking.

  • Answered by AI
  • Q2. Which type of material making for bolier
  • Ans. 

    Boilers are typically made from materials like steel, cast iron, and copper, chosen for their strength and heat resistance.

    • Steel: Commonly used for its high strength and ability to withstand high pressures.

    • Cast Iron: Known for excellent heat retention and durability, often used in residential boilers.

    • Copper: Used in some boiler designs for its excellent thermal conductivity, though less common due to cost.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Best for evaramenet of company
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Technically about company like safety..
  • Q2. What is 5s and devine
  • Ans. 

    5S is a methodology used to organize and maintain a clean and efficient workplace.

    • 5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.

    • It involves organizing and labeling tools and materials, cleaning and maintaining equipment, and creating a culture of continuous improvement.

    • Example: A factory implementing 5S might label all tools and materials, create a designated storage area for each item, and regularl...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Well i am saying for job seeker. Never give up and try very hardly believe in your self
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. What is difference between RTD and thermocouple used
  • Ans. 

    RTD measures temperature using resistance change, while thermocouple uses voltage change.

    • RTD stands for Resistance Temperature Detector, while thermocouple generates voltage based on temperature difference.

    • RTDs are more accurate and stable compared to thermocouples.

    • RTDs have higher initial cost but lower long-term maintenance cost.

    • Thermocouples are more rugged and can withstand higher temperatures than RTDs.

    • Example: RT...

  • Answered by AI
  • Q2. What is the PLC and DCS system
  • Ans. 

    PLC and DCS systems are control systems used in industrial automation to monitor and control processes.

    • PLC stands for Programmable Logic Controller, used for controlling machinery and processes in manufacturing.

    • DCS stands for Distributed Control System, used for controlling complex processes across multiple locations.

    • PLCs are typically used for discrete control applications, while DCS systems are used for continuous co...

  • Answered by AI
  • Q3. What is the AC And DC drive
  • Ans. 

    AC and DC drives are types of electrical drives used to control the speed and torque of electric motors.

    • AC drive controls the speed of an AC motor by varying the frequency of the electrical supply.

    • DC drive controls the speed of a DC motor by varying the voltage supplied to the motor.

    • AC drives are more commonly used in industrial applications due to their efficiency and flexibility.

    • DC drives are often used in applicatio...

  • Answered by AI
  • Q4. What do you understand by 4 wire and 2 wire
  • Ans. 

    4 wire and 2 wire are configurations used in electrical circuits for measuring resistance.

    • 4 wire configuration is used for accurate resistance measurements by eliminating lead resistance

    • 2 wire configuration is simpler but less accurate due to lead resistance affecting measurements

    • Examples: 4 wire used in precision instruments like multimeters, 2 wire used in basic circuit testing

  • Answered by AI

Skills evaluated in this interview

Intern Interview Questions & Answers

Thermax Limited user image Shubhechya Sarkar

posted on 22 Aug 2017

I appeared for an interview in Jan 2017.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself.
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Recent graduate with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. Tell us about your involvement in sports and your activities.
  • Ans. 

    I have been actively involved in sports since childhood, participating in various team sports and individual activities.

    • Played soccer for 10 years, competing at a regional level

    • Participated in track and field events in high school, specializing in long jump and hurdles

    • Currently enjoy hiking and rock climbing in my free time

  • Answered by AI
  • Q3. Discussion of company policies about side income and startups.

Interview Preparation Tips

Round: Test
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes

Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes

Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.

I applied via Walk-in and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - One-on-one 

(1 Question)

  • Q1. Sourcing and Vendor development related

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical of ZBC and Manufacturing process.

I applied via Naukri.com and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Fast company work experience & my self introduction, personal skills etc
  • Q2. How to feel working in fast company

Interview Preparation Tips

Interview preparation tips for other job seekers - It's something good

I applied via Naukri.com and was interviewed in Mar 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. All were professional questions wrt to their department

Interview Preparation Tips

Interview preparation tips for other job seekers - It was an virtual interview, with panel board members, they test our professional standard and expect honest answers.

I applied via Approached by Company and was interviewed before Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Drum level like single element and three elements

Interview Preparation Tips

Interview preparation tips for other job seekers - Company is ok anyone can join this company, all the thing that are systematicg

United Industries Interview FAQs

How many rounds are there in United Industries Quality Line Inspector interview?
United Industries interview process usually has 1 rounds. The most common rounds in the United Industries interview process are One-on-one Round.

Tell us how to improve this page.

United Industries Quality Line Inspector Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 258 Interviews
ABB Interview Questions
4.1
 • 241 Interviews
Atlas Copco Interview Questions
4.2
 • 79 Interviews
View all
Junior Engineer
88 salaries
unlock blur

₹1.8 L/yr - ₹3.5 L/yr

Quality Engineer
31 salaries
unlock blur

₹1.2 L/yr - ₹4.3 L/yr

Senior Engineer
25 salaries
unlock blur

₹4.1 L/yr - ₹8 L/yr

Graduate Engineer Trainee (Get)
24 salaries
unlock blur

₹1.5 L/yr - ₹2.8 L/yr

Engineer
21 salaries
unlock blur

₹2.2 L/yr - ₹4.5 L/yr

Explore more salaries
Compare United Industries with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Tractors and Farm Equipment

4.0
Compare

Isgec Heavy Engineering

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview