Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Triveni Turbines Team. If you also belong to the team, you can get access from here

Triveni Turbines Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Triveni Turbines Interview Questions, Process, and Tips

Updated 13 Feb 2025

Top Triveni Turbines Interview Questions and Answers

View all 17 questions

Triveni Turbines Interview Experiences

Popular Designations

33 interviews found

I applied via Campus Placement and was interviewed in Feb 2022. There were 5 interview rounds.

Round 1 - Aptitude Test 

Prepare basics of your engineering Production, Automobile, Thermal, Aptitude, Reasoning.

Round 2 - Group Discussion 

Depend on the HR

Round 3 - Technical 

(1 Question)

  • Q1. Fav Subject and Basics of Engineering
Round 4 - Technical 

(1 Question)

  • Q1. Fav Subject and basics of Engineering
Round 5 - Technical 

(2 Questions)

  • Q1. This is the final all the panel member sits and ask us about our projects activities basics of turbine
  • Q2. What is Rankins Cycle Explain? etc.
  • Ans. 

    Rankine cycle is a thermodynamic cycle used in power plants to convert heat energy into mechanical work.

    • Rankine cycle is a vapor power cycle.

    • It consists of four processes: heating, vaporization, expansion, and condensation.

    • The cycle uses a working fluid, typically water, to transfer heat from a heat source to a heat sink.

    • The working fluid is pumped to a boiler where it is heated and vaporized.

    • The high-pressure vapor is...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The industries Narrow down the departments if have other opportunities take that and also have bond

Graduate Engineer Trainee (Get) Interview Questions asked at other Companies

Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Difference between Otto cycle and Diesel cycle? What is the process of both cycle and what is the effeciency of both cycle ? Which one is good in effeciency? Q:3 Difference between... read more
View answer (2)

Manager SCM Interview Questions & Answers

user image Prasad K

posted on 30 Oct 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Objective exams including grammar, maths and general aptitude

Round 3 - One-on-one 

(5 Questions)

  • Q1. What is the density of Steel, Aluminium. What is important in SCM What is challenges faced in Purchase
  • Ans. 

    The density of Steel is around 7.85 g/cm³ and Aluminium is around 2.70 g/cm³. Important factors in SCM include inventory management, supplier relationships, and cost optimization. Challenges in Purchase include supplier quality control, lead time management, and price fluctuations.

    • Steel has a density of approximately 7.85 g/cm³

    • Aluminium has a density of roughly 2.70 g/cm³

    • Important factors in SCM include inventory manag...

  • Answered by AI
  • Q2. What is the main role of SCM
  • Ans. 

    The main role of SCM is to manage the flow of goods and services, from raw materials to the final product, ensuring efficiency and cost-effectiveness.

    • Coordinate and collaborate with suppliers to ensure timely delivery of materials

    • Optimize inventory levels to minimize costs while meeting demand

    • Streamline processes to improve efficiency and reduce lead times

    • Manage logistics and transportation to ensure smooth flow of goo...

  • Answered by AI
  • Q3. What are all the important parameters of Purchase
  • Ans. 

    Important parameters of Purchase include price, quality, lead time, supplier reliability, and terms of payment.

    • Price: The cost of the product or service being purchased.

    • Quality: The standard of the product or service being purchased.

    • Lead time: The time it takes for the supplier to deliver the product or service.

    • Supplier reliability: The trustworthiness and consistency of the supplier.

    • Terms of payment: The agreed upon p

  • Answered by AI
  • Q4. What will be the speed of the rotor shaft
  • Ans. 

    The speed of the rotor shaft will depend on various factors such as the power input, gear ratio, and load on the shaft.

    • The speed of the rotor shaft can be calculated using the formula: Speed = (Power input * 60) / (2 * pi * Gear ratio)

    • Factors such as the power input, gear ratio, and load on the shaft will determine the speed of the rotor shaft

    • Higher power input or lower gear ratio will result in higher speed of the rot...

  • Answered by AI
  • Q5. Why nickel is added in the steel
  • Ans. 

    Nickel is added in steel to improve its strength, toughness, and corrosion resistance.

    • Nickel increases the strength and toughness of steel

    • Nickel improves the corrosion resistance of steel

    • Nickel is often added in stainless steel to enhance its properties

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Basics should be strong here. Learn about the castings, forgings, rotor shafts and Gear boxes to Crack interview

Manager SCM Interview Questions asked at other Companies

Q1. How you can increase the profits to our Organization
View answer (4)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jul 2019. There were 2 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic of turbine and tolarnce limit

Interview Preparation Tips

Interview preparation tips for other job seekers - Clearance type. Types of turbine. Diff between impulse and reaction turbine. Ranking cycle.

Assistant Engineer Interview Questions asked at other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete of 5 or less than 5 Meter cube.
View answer (9)

Interview Questions & Answers

user image Anonymous

posted on 16 Dec 2021

I applied via Naukri.com

Interview Questionnaire 

2 Questions

  • Q1. Questions based on CV , marketing experience
  • Q2. Questions on API knowledge, technical and commercial experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you say, they cross verify ,be confident in what you say.

Triveni Turbines interview questions for popular designations

 Graduate Engineer Trainee (Get)

 (7)

 Assistant Engineer

 (2)

 Deputy Manager

 (2)

 Sales

 (1)

 Electrical Engineer

 (1)

 Project Engineer

 (1)

 Quality Assurance/Quality Control Manager

 (1)

 HR Manager

 (1)

I applied via Referral and was interviewed in Mar 2022. There was 1 interview round.

Round 1 - Turbine 

(2 Questions)

  • Q1. What is oli preshar in 3mw turbaine
  • Ans. 

    Oil pressure is the pressure of oil in the lubrication system of the turbine.

    • Oil pressure is important for proper lubrication of the turbine's moving parts.

    • Low oil pressure can cause damage to the turbine's components.

    • High oil pressure can indicate a blockage in the lubrication system.

    • Oil pressure is typically measured in pounds per square inch (PSI).

  • Answered by AI
  • Q2. Turbaine oli tank capsiti

Interview Preparation Tips

Interview preparation tips for other job seekers - Me opretar in 3 mw turbine and my experience in 2 years

Turbine Operator Interview Questions asked at other Companies

Q1. Why is vacuum needed in turbine?
View answer (2)

Get interview-ready with Top Triveni Turbines Interview Questions

I applied via Campus Placement and was interviewed before Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

I was campus hire, so there was direct GD and personal interview.

Round 3 - One-on-one 

(2 Questions)

  • Q1. Basics of mechanical engineering, physics, HR related question.
  • Q2. 1. Suppose a surface is frictionless then how would you reach at corner of room. 2. Rankine Cycle 3. Mostly they ask from the favourite subject.
  • Ans. 

    Answering questions related to frictionless surfaces, Rankine cycle, and favorite subject for Deputy Manager position.

    • To reach the corner of a room on a frictionless surface, one can use a combination of pushing off walls and objects in the room.

    • Rankine cycle is a thermodynamic cycle used in power plants to convert heat into work.

    • My favorite subject is management as it allows me to utilize my leadership and organizatio

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep strong basics, improve communication skills, speak up in GD

Deputy Manager Interview Questions asked at other Companies

Q1. 1.WHAT IS SPECIAL OF UR HOME TOWN 2.Who is Main compitetor with us and which products...3.what is main business in your area and its functions...4 Previous comoany achevements 5.Your strengts and weakness.
View answer (69)

Jobs at Triveni Turbines

View all

Sales Interview Questions & Answers

user image Anonymous

posted on 15 Aug 2021

I applied via Referral and was interviewed in Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical question related to steam turbine.

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic of steam turbine, errection, commissioning and overhauling maintenance procedure etc.

Sales Interview Questions asked at other Companies

Q1. Shall anyone should go for BDA Or Sales for Learning / Monetary benefit?
View answer (7)

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Group Discussion 

Topics was demonisation

Round 2 - HR 

(1 Question)

  • Q1. Tell about your project

Interview Preparation Tips

Interview preparation tips for other job seekers - Read about turbine type , add some extra curricular activities and feel confident

Graduate Engineer Trainee (Get) Interview Questions asked at other Companies

Q1. Q: 1 What is IC engine? What is the types of IC engine? Q:2 Difference between Otto cycle and Diesel cycle? What is the process of both cycle and what is the effeciency of both cycle ? Which one is good in effeciency? Q:3 Difference between... read more
View answer (2)

I applied via Walk-in and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic mechanical engineer subjects

Interview Preparation Tips

Interview preparation tips for other job seekers - I was nice 1 day process

Quality Assurance/Quality Control Manager Interview Questions asked at other Companies

Q1. What is basic difference between UV visible and IR spectroscopy?
View answer (1)

I applied via Campus Placement and was interviewed before May 2019. There was 1 interview round.

Interview Questionnaire 

5 Questions

  • Q1. Some technical question.
  • Q2. Family back ground.
  • Q3. Realtive background
  • Q4. No of brother and sister.
  • Q5. What ur parents do( work)

Interview Preparation Tips

Interview preparation tips for other job seekers - Go with technical knowledge about . Basic of turbine. Alignment. And clearance fit etc.

Assistant Engineer Interview Questions asked at other Companies

Q1. Why do we take only 1 set of cube sample at a casting of concrete of 5 or less than 5 Meter cube.
View answer (9)

Triveni Turbines Interview FAQs

How many rounds are there in Triveni Turbines interview?
Triveni Turbines interview process usually has 2-3 rounds. The most common rounds in the Triveni Turbines interview process are Technical, Aptitude Test and HR.
How to prepare for Triveni Turbines interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Triveni Turbines. The most common topics and skills that interviewers at Triveni Turbines expect are AutoCAD, Overhauling, Project Management, Steam Turbine and 3D Modeling.
What are the top questions asked in Triveni Turbines interview?

Some of the top questions asked at the Triveni Turbines interview -

  1. Tell me some miracle in thermodynami...read more
  2. What is second law of thermodynamics and prove ...read more
  3. 1. Suppose a surface is frictionless then how would you reach at corner of room...read more
How long is the Triveni Turbines interview process?

The duration of Triveni Turbines interview process can vary, but typically it takes about 2-4 weeks to complete.

Tell us how to improve this page.

Triveni Turbines Interview Process

based on 27 interviews

Interview experience

3.9
  
Good
View more

Interview Questions from Similar Companies

Siemens Interview Questions
4.1
 • 418 Interviews
Thermax Limited Interview Questions
4.1
 • 251 Interviews
Tata Power Interview Questions
3.9
 • 162 Interviews
Suzlon Group Interview Questions
4.1
 • 129 Interviews
BHEL Interview Questions
4.1
 • 113 Interviews
GE Vernova Interview Questions
4.1
 • 83 Interviews
View all

Triveni Turbines Reviews and Ratings

based on 191 reviews

3.7/5

Rating in categories

3.5

Skill development

3.3

Work-life balance

3.3

Salary

3.8

Job security

3.3

Company culture

3.1

Promotions

3.4

Work satisfaction

Explore 191 Reviews and Ratings
EHS Specialist

Bangalore / Bengaluru

7-12 Yrs

Not Disclosed

Piping Design

Bangalore / Bengaluru

6-10 Yrs

Not Disclosed

Spare Parts Sales Manager

Noida,

Bangalore / Bengaluru

6-10 Yrs

Not Disclosed

Explore more jobs
Senior Engineer
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
93 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
69 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
38 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
23 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Triveni Turbines with

BHEL

4.1
Compare

Kirloskar Brothers

3.8
Compare

Siemens

4.1
Compare

Thermax Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview