Add office photos
Filter interviews by
Tricom Network Engineer Interview Questions and Answers
Tricom Network Engineer Interview Experiences
1 interview found
Vedang Koli
I applied via Naukri.com and was interviewed in Dec 2021. There was 1 interview round.
Interview Questionnaire
2 Questions
- Q1. Experience ?
- Q2. None of these
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
KUNDAN KUMAR
I applied via Campus Placement and was interviewed in Sep 2024. There were 3 interview rounds.
It is online test. In this test there is question of apti and also coding and from 5g question.
There are two questions asked and time is enough to solve 60 minutes
(5 Questions)
- Q1. Wap for palindrome number
- Ans.
A palindrome number is a number that remains the same when its digits are reversed.
Convert the number to a string
Reverse the string
Check if the reversed string is equal to the original string
- Q2. Add two numbers by function
- Ans.
Create a function to add two numbers
Define a function that takes two parameters as input
Inside the function, add the two numbers together and return the result
Example: function addNumbers(num1, num2) { return num1 + num2; }
- Q3. Write a code for Binary search
- Ans.
Binary search code implementation in Python
Define a function that takes a sorted array and a target value as input
Initialize two pointers, low and high, to the start and end of the array respectively
While low is less than or equal to high, calculate mid as (low + high) // 2 and compare array[mid] with target
If array[mid] is equal to target, return mid
If array[mid] is less than target, update low to mid + 1
If array[mid]...
- Q4. Wap for check your name is palindrome not
- Ans.
A program to check if a given name is a palindrome or not.
Convert the name to lowercase to handle case-insensitivity
Remove any spaces or special characters from the name
Reverse the name and compare it with the original name to check for palindrome
- Q5. What is malloc and calloc function
- Ans.
malloc and calloc are functions in C programming used for dynamic memory allocation.
malloc function is used to allocate a single block of memory of a specified size.
calloc function is used to allocate multiple blocks of memory of a specified size, initialized to zero.
Example: int *ptr = (int*)malloc(5 * sizeof(int));
Example: int *ptr = (int*)calloc(5, sizeof(int));
Interview Preparation Tips
- Basic programming
Skills evaluated in this interview
Vikas Gunjal
Selected
(2 Questions)
- Q1. CCNA SWITCHING and switching
- Q2. Routing
(1 Question)
- Q1. Manager round CCNA routing and switching
Anonymous
I applied via Job Portal and was interviewed in Nov 2024. There were 2 interview rounds.
I would like simple test
(5 Questions)
- Q1. I would like to lisen the words of company maganement .. And the process of company rules and regulations ..
- Q2. I will occupy the group of my team to secrue the entire the company to first stage
- Q3. I want to.Get a job inMahindra
- Q4. I didn't learn the computertyping but will learn definitely.. in tech Mahindr company basics
- Q5. I am a student degree first year.. ButI would like work in techMahindra..
Interview Preparation Tips
The tech Mahindra was better than the future
Normal communication check
(5 Questions)
- Q1. Basci CCNA question
- Q2. EIGRP was asked
- Q3. DHCp was asked and how it works
- Q4. What is loop and what is the IP
- Ans.
A loop is a sequence of instructions that is continually repeated until a certain condition is met. An IP (Internet Protocol) address is a unique numerical label assigned to each device connected to a computer network.
A loop is used in programming to execute a block of code repeatedly until a specific condition is met.
There are different types of loops such as for loop, while loop, and do-while loop.
An IP address is us...
- Q5. Rotuing protocols and switch protocols
Skills evaluated in this interview
(2 Questions)
- Q1. What BGP OSPF VPN
- Ans.
BGP, OSPF, and VPN are all protocols used in networking to facilitate communication and secure data transmission.
BGP (Border Gateway Protocol) is used to exchange routing information between different autonomous systems on the internet.
OSPF (Open Shortest Path First) is an interior gateway protocol used to find the best path for routing within a single autonomous system.
VPN (Virtual Private Network) is a technology tha...
- Q2. Smtp rstm vlan intervlan
(2 Questions)
- Q1. Ethereal channel
- Q2. OSPF BGP ethereal vpn erc
Interview Preparation Tips
Skills evaluated in this interview
(3 Questions)
- Q1. Share you internship exp
- Ans.
I interned at a telecommunications company where I gained hands-on experience in configuring network devices and troubleshooting network issues.
Configured routers and switches to optimize network performance
Assisted in setting up VLANs and implementing security protocols
Troubleshooted network connectivity issues for end users
Participated in network infrastructure upgrades and maintenance
- Q2. All question based on the resume only
- Q3. Prepare whatever written in your resume
Interview Preparation Tips
(2 Questions)
- Q1. What is LSA7 ?
- Q2. What is Area in ospf?
I applied via Referral and was interviewed in Jun 2024. There was 1 interview round.
(2 Questions)
- Q1. What do you know about routing?
- Ans.
Routing is the process of selecting the best path for network traffic to reach its destination.
Routing involves determining the optimal path for data packets to travel from the source to the destination.
Routers use routing tables to make decisions on how to forward packets based on destination IP addresses.
There are different types of routing protocols such as RIP, OSPF, EIGRP, and BGP.
Static routing involves manually ...
- Q2. What do you know about switching?
- Ans.
Switching is a networking technique used to forward data packets between devices on a computer network.
Switching involves the process of receiving, analyzing, and forwarding data packets within a network.
Switches operate at Layer 2 (Data Link Layer) of the OSI model.
Switches use MAC addresses to determine the destination of data packets.
Switches create separate collision domains and broadcast domains, improving network...
Interview Preparation Tips
Skills evaluated in this interview
omkar Renavikar
(1 Question)
- Q1. What is hsrp,vrrp
- Ans.
HSRP (Hot Standby Router Protocol) and VRRP (Virtual Router Redundancy Protocol) are network protocols used for providing high availability in routing.
HSRP and VRRP are used to provide redundancy for routers in a network.
They allow for automatic failover in case of a router failure.
HSRP is a Cisco proprietary protocol, while VRRP is an open standard protocol.
Both protocols use a virtual IP address that clients use as t...
Skills evaluated in this interview
Tell us how to improve this page.
Interview Questions for Popular Designations
- Network Administrator Interview Questions
- Senior Network Engineer Interview Questions
- Network Support Engineer Interview Questions
- L2 Network Engineer Interview Questions
- Network Engineer L1 Interview Questions
- Network Security Engineer Interview Questions
- Network Specialist Interview Questions
- Network Analyst Interview Questions
- Show more
People are getting interviews through
Network Engineer Interview Questions from Similar Companies
|
Data Entry Operator
26
salaries
|  ₹0.7 L/yr - ₹2.5 L/yr |
|
Computer Operator
4
salaries
| ₹1 L/yr - ₹1.4 L/yr |
|
Back Office Executive
3
salaries
| ₹0.9 L/yr - ₹2.7 L/yr |
|
Data Operator
3
salaries
| ₹0.4 L/yr - ₹0.8 L/yr |
TCS
Infosys
Wipro
HCLTech
Calculate your in-hand salary
- Home >
- Interviews >
- Tricom Interview Questions >
- Tricom Network Engineer Interview Questions
