Upload Button Icon Add office photos

Tata Chemicals

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Tata Chemicals Diploma Trainee Engineer Interview Questions and Answers

Updated 7 Oct 2022

Tata Chemicals Diploma Trainee Engineer Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Transformer, machine, distribution, maths, reasoning
Round 2 - Technical 

(3 Questions)

  • Q1. If your are freshers and in electrical then focus more on your project.
  • Q2. 80% from your project
  • Q3. Why you choose this project, it's importance

Interview Preparation Tips

Topics to prepare for Tata Chemicals Diploma Trainee Engineer interview:
  • Motors
  • Transformers
  • Power Electronics
Interview preparation tips for other job seekers - Language is not a barrier, Hindi and English both preferable, Be confident

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed in Jan 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Realted to general chemeistry and unit operation
  • Q2. Ralted to previous company saftey processor

Interview Preparation Tips

Interview preparation tips for other job seekers - ba calm .
give interview with full confidence
dont hessitat in from of interviewer

I applied via Approached by Company and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Mostly about heat transfer operation, types of pumps, blowers and fan.

Interview Preparation Tips

Topics to prepare for Grasim Industries Junior Engineer interview:
  • Heat transfer operation
  • Pumps
  • Fan and blower
Interview preparation tips for other job seekers - If u reside near veraval, it'll be best bt if u r distant living it will be worst... Dont go there.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Apr 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Previous industry process, role , any emergency handle, manpower handling,
  • Q2. Power failure condition basic safety related questions,
Round 3 - HR 

(2 Questions)

  • Q1. Why u want to join
  • Ans. 

    I want to join because I am passionate about engineering and eager to learn and contribute to the field.

    • Passionate about engineering

    • Eager to learn and contribute

    • Excited about the opportunity to apply my skills and knowledge

    • Motivated to work in a team and solve complex problems

    • Desire to make a positive impact through engineering

  • Answered by AI
  • Q2. Salary discussion , any worker union and do u participate in it

Interview Preparation Tips

Interview preparation tips for other job seekers - Just go with confidence and prepare with basic. All related promotion, increment,HRA discuss

Interview Questionnaire 

4 Questions

  • Q1. About of convear belt and used & equipment of convear belt
  • Q2. What is bearing and types
  • Ans. 

    Bearings are mechanical components that reduce friction between moving parts.

    • Bearings are used in machines to support rotating shafts and reduce friction.

    • There are several types of bearings including ball bearings, roller bearings, and plain bearings.

    • Ball bearings use balls to reduce friction and are commonly used in applications such as skateboards and bicycles.

    • Roller bearings use cylindrical rollers to reduce frictio...

  • Answered by AI
  • Q3. What is gear and types
  • Ans. 

    Gears are mechanical components that transmit power and motion between rotating shafts. There are various types of gears.

    • Gears are used to transmit power and motion between rotating shafts

    • They are made up of teeth that mesh with each other to transfer torque

    • Types of gears include spur, helical, bevel, worm, rack and pinion, and planetary gears

    • Spur gears are the most common type and have straight teeth

    • Helical gears have...

  • Answered by AI
  • Q4. Used of coupling .
  • Ans. 

    Coupling is a device used to connect two shafts together at their ends for transmitting power.

    • Couplings are used to transmit power from one shaft to another.

    • They are used to compensate for misalignment between the shafts.

    • Couplings can also be used to absorb shock and vibration.

    • Examples of couplings include gear couplings, jaw couplings, and fluid couplings.

  • Answered by AI
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. P&id preparation and pump sizing
  • Q2. Distillation column and heat exchanger design
  • Ans. 

    Distillation column and heat exchanger design

    • Distillation column design involves determining the number of trays, column diameter, and height

    • Heat exchanger design involves selecting the appropriate type of exchanger, sizing the heat transfer area, and determining the heat transfer coefficient

    • Factors to consider in both designs include the properties of the fluids being processed, flow rates, and pressure drop

    • Computer s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer on which only you know
Do not bluffing
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - HR 

(2 Questions)

  • Q1. Salary discussion, experience etc
  • Q2. CTC expected ,last company CTC & gross payment
Round 3 - Technical 

(1 Question)

  • Q1. About my department & operational parameters.

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep full confidence &free mind if u don't know the answer of any questions simply say that sir I don't know.i will try to find out answer ..
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. Plant related previous company question . All process in plant. Safety se realated. Permit se related.
  • Q2. How many types of permit. Safety related.

Interview Preparation Tips

Interview preparation tips for other job seekers - All companies process.
Pump related question and valve related.
Permit.
Safety.

I applied via Walk-in and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Different between single mechanical seal and double mechanical seal
  • Ans. 

    A single mechanical seal consists of one set of sealing surfaces, while a double mechanical seal consists of two sets of sealing surfaces.

    • Single mechanical seals are commonly used in applications with low to moderate pressure and temperature.

    • Double mechanical seals are used in applications with high pressure and temperature to provide an extra layer of protection.

    • Single mechanical seals are simpler and easier to instal...

  • Answered by AI
  • Q2. Type of gear box in used ssr rector
  • Ans. 

    The type of gearbox used in SSR reactors is typically a helical gearbox.

    • SSR reactors commonly use helical gearboxes for their efficient power transmission.

    • Helical gearboxes have high load-carrying capacity and smooth operation.

    • They are suitable for applications requiring high torque and low noise levels.

    • Examples of helical gearboxes used in SSR reactors include inline helical gearboxes and parallel shaft helical gearbo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Plz consult the resume bet job and best position

I applied via Naukri.com and was interviewed in Feb 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. "Why do you want this job ?"
  • Q2. "Out of all the other candidates, why should we hire you?"

Interview Preparation Tips

Interview preparation tips for other job seekers - 1. Now go deeper. Don't just talk about why the company would be great to work for; talk about how the position is a perfect fit for what you hope to accomplish, both short-term and long-term.

And if you don't know why the position is a perfect fit ... look somewhere else. Life is too short.


2. Since a candidate cannot compare himself with people he doesn't know, all he can do is describe his incredible passion and desire and commitment and ... well, basically beg for the job. (Way too many interviewers ask the question and then sit back, arms folded, as if to say, "Go ahead. I'm listening. Try to convince me.")

And you learn nothing of substance.

Here's a better question: "What do you feel I need to know that we haven't discussed?" Or even "If you could get a do-over on one of my questions, how would you answer it now?"

Rarely do candidates come to the end of an interview feeling they've done their best. Maybe the conversation went in an unexpected direction. Maybe the interviewer focused on one aspect of their skills and totally ignored other key attributes. Or maybe candidates started the interview nervous and hesitant, and now wish they could go back and better describe their qualifications and experience.

Plus, think of it this way: Your goal as an interviewer is to learn as much as you possibly can about every candidate, so don't you want to give them the chance to ensure you do?

Just make sure to turn this part of the interview into a conversation, not a soliloquy. Don't just passively listen and then say, "Thanks. We'll be in touch." Ask follow-up questions. Ask for examples.

And of course if you're asked this question ... use it as a chance to highlight things you haven't been able to touch on.
Contribute & help others!
anonymous
You can choose to be anonymous

Tata Chemicals Interview FAQs

How many rounds are there in Tata Chemicals Diploma Trainee Engineer interview?
Tata Chemicals interview process usually has 3 rounds. The most common rounds in the Tata Chemicals interview process are Technical and Resume Shortlist.
How to prepare for Tata Chemicals Diploma Trainee Engineer interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Tata Chemicals. The most common topics and skills that interviewers at Tata Chemicals expect are Compliance, Excel, Interpersonal Skills, MS Office and Powerpoint.

Recently Viewed

SALARIES

Tata Chemicals

SALARIES

Tata Chemicals

SALARIES

Huron Technologies

SALARIES

Tata Chemicals

SALARIES

Tata Chemicals

LIST OF COMPANIES

Tata Chemicals

Locations

INTERVIEWS

Tata Chemicals

No Interviews

INTERVIEWS

Huron

No Interviews

INTERVIEWS

Tata Chemicals

No Interviews

INTERVIEWS

Tata Chemicals

No Interviews

Tell us how to improve this page.

Interview Questions from Similar Companies

Berger Paints Interview Questions
3.7
 • 259 Interviews
Grasim Industries Interview Questions
4.0
 • 205 Interviews
SRF Interview Questions
4.1
 • 179 Interviews
UPL Interview Questions
4.1
 • 175 Interviews
DCM Shriram Interview Questions
4.2
 • 87 Interviews
Atul Interview Questions
3.9
 • 83 Interviews
View all
Tata Chemicals Diploma Trainee Engineer Salary
based on 18 salaries
₹2.2 L/yr - ₹2.5 L/yr
10% more than the average Diploma Trainee Engineer Salary in India
View more details

Tata Chemicals Diploma Trainee Engineer Reviews and Ratings

based on 7 reviews

4.5/5

Rating in categories

4.1

Skill development

4.4

Work-life balance

3.4

Salary

4.8

Job security

3.8

Company culture

3.2

Promotions

4.6

Work satisfaction

Explore 7 Reviews and Ratings
Assistant Manager
132 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
102 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
89 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Territory Sales Incharge
48 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tata Chemicals with

UPL

4.1
Compare

Pidilite Industries

4.3
Compare

Grasim Industries

4.0
Compare

Hindustan Unilever

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview