Upload Button Icon Add office photos

Filter interviews by

Tractors and Farm Equipment Engineer Trainee Interview Questions and Answers

Updated 24 Oct 2024

Tractors and Farm Equipment Engineer Trainee Interview Experiences

1 interview found

Engineer Trainee Interview Questions & Answers

user image Pratik Nagpure

posted on 24 Oct 2024

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Oct 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Quants, Agri. GK based questions

Round 2 - Group Discussion 

Trending world topics

Round 3 - One-on-one 

(2 Questions)

  • Q1. Basic Tractor related questions
  • Q2. Information about the company

Interview questions from similar companies

I applied via Approached by Company and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Every model hydra and new generation crane up to 23 ton

Interview Preparation Tips

Interview preparation tips for other job seekers - I m always ready for my team help and heavy job

I applied via Walk-in and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Same maintenance question laser machine, welding machine, utility and maintenance work

Interview Preparation Tips

Interview preparation tips for other job seekers - Go and do the interview nice job
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is your experiencce
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Achievements in previous experience

Round 3 - Technical 

(2 Questions)

  • Q1. Technically full worthful
  • Q2. What is ur chievements in ur previous experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Life time job based on management
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me about yourself ?
  • Q2. About your work experience?

Interview Preparation Tips

Interview preparation tips for other job seekers - Confidence , good energy level

Interview Questionnaire 

6 Questions

  • Q1. Drum level transmitter
  • Q2. Boiler interlocking
  • Q3. Vibration sensors
  • Q4. Turbine parameters and interlocking
  • Q5. DCS tag assigning process
  • Ans. 

    DCS tag assigning process involves assigning unique names to process variables for monitoring and control.

    • DCS tag assigning process is crucial for efficient process control and monitoring.

    • Each tag represents a process variable and is assigned a unique name for easy identification.

    • Tags can be assigned manually or automatically based on the process requirements.

    • Tag naming conventions should be consistent and follow indus...

  • Answered by AI
  • Q6. Smart positioners like Simens Sipart 02

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident don't nervous

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in May 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(6 Questions)

  • Q1. Which are the equipment used in steam turbine? And their principal and working and troubleshooting?
  • Ans. 

    Equipment used in steam turbine include turbine blades, nozzles, casing, rotor, bearings, and governor.

    • Turbine blades: convert steam energy into mechanical energy

    • Nozzles: control the flow of steam into the turbine

    • Casing: contains and directs the steam flow through the turbine

    • Rotor: connected to the turbine blades and rotates to generate power

    • Bearings: support the rotor and reduce friction

    • Governor: regulates the speed o

  • Answered by AI
  • Q2. Tell us about the Woodward 505 ?
  • Ans. 

    Woodward 505 is a versatile control system used in industrial applications.

    • The Woodward 505 is a widely used control system in industries such as power generation, oil and gas, and marine.

    • It offers advanced features like PID control, sequencing, and communication capabilities.

    • The Woodward 505 is known for its reliability and robustness in harsh operating environments.

    • It can be easily integrated with various types of se

  • Answered by AI
  • Q3. Explain the structure of the Honeywell DCS ?
  • Ans. 

    The Honeywell DCS (Distributed Control System) is a modular system consisting of controllers, I/O modules, and operator stations.

    • Consists of controllers, I/O modules, and operator stations

    • Uses a network to communicate between components

    • Allows for centralized control and monitoring of processes

    • Supports various communication protocols such as Modbus, OPC, etc.

    • Example: Honeywell Experion PKS

  • Answered by AI
  • Q4. What is PID and How does it work ?
  • Ans. 

    PID stands for Proportional-Integral-Derivative, a control loop feedback mechanism used in engineering.

    • PID is a control algorithm that calculates an error value as the difference between a desired setpoint and a measured process variable.

    • Proportional (P) control responds to the current error value.

    • Integral (I) control accumulates past errors to correct the present error.

    • Derivative (D) control predicts future errors bas...

  • Answered by AI
  • Q5. How to assign new chennal in Honeywell DCS ?
  • Ans. 

    To assign a new channel in Honeywell DCS, you need to access the configuration software and follow the steps to add the channel.

    • Access the Honeywell DCS configuration software

    • Navigate to the channel configuration section

    • Add a new channel by specifying the channel number, type, and other relevant parameters

    • Save the changes and verify the new channel is successfully assigned

  • Answered by AI
  • Q6. Tell the interlock and permissive of boiler and turbine?
  • Ans. 

    Interlocks and permissives are safety mechanisms in place to prevent unsafe operation of boiler and turbine systems.

    • Interlocks prevent certain actions from taking place unless specific conditions are met

    • Permissives allow certain actions to take place only if specific conditions are met

    • Example of interlock: Boiler feed pump interlock prevents the boiler from starting unless the feed pump is running

    • Example of permissive:...

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic aptitude from rs agrawal book is sufficient

Round 2 - Technical 

(1 Question)

  • Q1. There were basic questions from SOM and mechanics
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024, where I was asked the following questions.

  • Q1. How many your experience
  • Ans. 

    I have over 8 years of experience in software engineering, specializing in full-stack development and team leadership.

    • Led a team of 5 engineers in developing a scalable e-commerce platform, resulting in a 30% increase in sales.

    • Implemented CI/CD pipelines that reduced deployment time by 50%, enhancing team productivity.

    • Worked on a healthcare application that improved patient data management, ensuring compliance with HIP

  • Answered by AI
  • Q2. What is your responsibility at site kindly tell us
  • Ans. 

    As a Senior Engineer on-site, I oversee project execution, ensure safety compliance, and mentor junior engineers.

    • Project Management: Oversee daily operations and ensure project milestones are met, e.g., coordinating with contractors.

    • Safety Compliance: Implement safety protocols and conduct regular safety audits to minimize risks, e.g., ensuring PPE usage.

    • Technical Guidance: Provide technical support and solutions to en...

  • Answered by AI
  • Q3. What is the process of alignment
  • Ans. 

    Alignment is the process of adjusting components to achieve optimal performance and coherence in systems or teams.

    • In engineering, alignment ensures that mechanical parts fit together correctly, e.g., aligning gears in a machine.

    • In project management, team alignment involves ensuring all members understand and work towards the same goals.

    • In software development, code alignment refers to maintaining consistent coding sta...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thermax is a good company no dough

Tractors and Farm Equipment Interview FAQs

How many rounds are there in Tractors and Farm Equipment Engineer Trainee interview?
Tractors and Farm Equipment interview process usually has 3 rounds. The most common rounds in the Tractors and Farm Equipment interview process are Aptitude Test, Group Discussion and One-on-one Round.

Tell us how to improve this page.

Tractors and Farm Equipment Engineer Trainee Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Tractors and Farm Equipment Engineer Trainee Salary
based on 10 salaries
₹1.1 L/yr - ₹3 L/yr
27% less than the average Engineer Trainee Salary in India
View more details

Tractors and Farm Equipment Engineer Trainee Reviews and Ratings

based on 3 reviews

4.6/5

Rating in categories

4.6

Skill development

4.8

Work-life balance

4.5

Salary

4.5

Job security

4.5

Company culture

4.0

Promotions

4.5

Work satisfaction

Explore 3 Reviews and Ratings
Assistant Manager
327 salaries
unlock blur

₹6 L/yr - ₹15 L/yr

Field Officer
259 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Senior Engineer
204 salaries
unlock blur

₹5 L/yr - ₹10.2 L/yr

Deputy Manager
178 salaries
unlock blur

₹9.4 L/yr - ₹16.5 L/yr

Territory Manager
171 salaries
unlock blur

₹3.6 L/yr - ₹10 L/yr

Explore more salaries
Compare Tractors and Farm Equipment with

John Deere

4.1
Compare

Thermax Limited

4.1
Compare

ABB

4.1
Compare

KONE

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview