Upload Button Icon Add office photos

Filter interviews by

Tractors and Farm Equipment Company Trainee Interview Questions and Answers

Updated 10 Mar 2022

Tractors and Farm Equipment Company Trainee Interview Experiences

1 interview found

I applied via Campus Placement and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Internal gears can be made by
  • Q2. A drill bit of 20 mm diameter rotating at 500 r.p.m. with a feed rate of 0.2 mm/revolution is used to drill a through-hole in a mild steel plate 20 mm thickness. The depth of cut in this drilling operation...
  • Ans. 

    The depth of cut in the drilling operation can be calculated using the formula: depth of cut = feed rate / (2 * pi * radius)

    • The diameter of the drill bit is 20 mm, so the radius is 10 mm

    • The feed rate is 0.2 mm/revolution

    • The formula for calculating the depth of cut is: depth of cut = feed rate / (2 * pi * radius)

    • Substituting the values, depth of cut = 0.2 / (2 * 3.14 * 10) = 0.00318 mm

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I want any job related my qualifications and experience

Interview questions from similar companies

I applied via Naukri.com and was interviewed before May 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Share the details from work related questions

Round 3 - Technical 

(1 Question)

  • Q1. What ever the new ideas
Round 4 - Work related 

(4 Questions)

  • Q1. Which type of field in previous working area
  • Q2. How many years working experience and working time any improvement
  • Q3. Work related question
  • Q4. Why choose this type job

Interview Preparation Tips

Interview preparation tips for other job seekers - Your job related going time choose the company and salary, timing, near by transport all facility checked more important

I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Explain Compilation process steps?
  • Ans. 

    Compilation process involves several steps to convert source code into executable code.

    • Preprocessing: Includes header file inclusion, macro expansion, and conditional compilation.

    • Compilation: Translates source code into assembly code.

    • Assembly: Converts assembly code into machine code.

    • Linking: Combines object files and libraries to create an executable file.

    • Loading: Loads the executable file into memory and prepares it

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare well prior the interview, revise all the basic concepts of Embedded C and MATLAB if you have applied for embedded systems.

I applied via Naukri.com and was interviewed in Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Technical and Management questions related to my field

Interview Preparation Tips

Interview preparation tips for other job seekers - Interview are in two round ,1st is technical and then second round is HR .and then final for Salary.

I applied via Company Website and was interviewed in Dec 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. 1. Roles & Responsibilities ?
  • Q2. 2. Daily working routine ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confidence and never lied or claim anything, which is not done by you.

I applied via Recruitment Consultant and was interviewed in Mar 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Questions will be related to the post which company is offering.
  • Q2. Should be very accurate to all electronics queries

Interview Preparation Tips

Interview preparation tips for other job seekers - Be smart and to the point answers will help.

I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Questions on Process,Simulation, CAD

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident

I applied via Naukri.com and was interviewed in Apr 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is your Expertise in Quality

Interview Preparation Tips

Interview preparation tips for other job seekers - Kindly update your Skills and Knowledge according to market.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About your work
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience
Round 1 - Technical 

(5 Questions)

  • Q1. What is engine working
  • Ans. 

    Engine working refers to the process of converting fuel into mechanical energy to power a vehicle or machine.

    • Fuel is ignited in the combustion chamber, creating high-pressure gases that push the pistons down.

    • The pistons are connected to the crankshaft, which converts the up-and-down motion into rotational motion.

    • The rotational motion is transferred to the transmission, which then powers the wheels or other machinery.

    • Th...

  • Answered by AI
  • Q2. What is thewirking pronciple of 4 stroje diesel engine
  • Ans. 

    A 4-stroke diesel engine works on the principle of internal combustion, where fuel is ignited by compressed air.

    • Intake stroke: air is drawn into the cylinder

    • Compression stroke: air is compressed, raising its temperature

    • Power stroke: fuel is injected and ignited, causing a rapid expansion of gases and pushing the piston down

    • Exhaust stroke: the piston pushes the exhaust gases out of the cylinder

    • Diesel engines are more fu...

  • Answered by AI
  • Q3. What are the engine type of engine
  • Ans. 

    There are several types of engines, including internal combustion, electric, hybrid, and rotary engines.

    • Internal combustion engines are the most common and include gasoline and diesel engines.

    • Electric engines use electricity to power the vehicle and are becoming more popular.

    • Hybrid engines combine both internal combustion and electric engines.

    • Rotary engines are less common and use a unique design to generate power.

    • Othe...

  • Answered by AI
  • Q4. What is value timing diagram
  • Ans. 

    A value timing diagram is a graphical representation of the timing relationship between input and output signals.

    • It shows the timing relationship between input and output signals

    • It is used to analyze the behavior of digital circuits

    • It helps in identifying timing violations and optimizing circuit performance

    • It consists of a horizontal time axis and vertical voltage axis

    • Examples include setup and hold time diagrams for f

  • Answered by AI
  • Q5. What are the 3 main engine system
  • Ans. 

    The 3 main engine systems are fuel, ignition, and cooling.

    • Fuel system: responsible for delivering fuel to the engine

    • Ignition system: responsible for igniting the fuel-air mixture

    • Cooling system: responsible for regulating the engine temperature

    • Examples: gasoline engine, diesel engine, hybrid engine

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - You are employment the any Engineer he is all knowledgeable engine hyd. And gear box

Tractors and Farm Equipment Interview FAQs

How many rounds are there in Tractors and Farm Equipment Company Trainee interview?
Tractors and Farm Equipment interview process usually has 2 rounds. The most common rounds in the Tractors and Farm Equipment interview process are Resume Shortlist and Technical.
What are the top questions asked in Tractors and Farm Equipment Company Trainee interview?

Some of the top questions asked at the Tractors and Farm Equipment Company Trainee interview -

  1. A drill bit of 20 mm diameter rotating at 500 r.p.m. with a feed rate of 0.2 mm...read more
  2. Internal gears can be made...read more

Tell us how to improve this page.

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 250 Interviews
John Deere Interview Questions
4.1
 • 228 Interviews
Caterpillar Inc Interview Questions
4.3
 • 176 Interviews
Sonalika Tractors Interview Questions
3.6
 • 129 Interviews
Force Motors Interview Questions
3.6
 • 116 Interviews
KONE Interview Questions
4.1
 • 101 Interviews
Hitachi Interview Questions
4.0
 • 81 Interviews
Atlas Copco Interview Questions
4.2
 • 78 Interviews
View all
Tractors and Farm Equipment Company Trainee Salary
based on 7 salaries
₹2.2 L/yr - ₹5 L/yr
24% more than the average Company Trainee Salary in India
View more details
Assistant Manager
338 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Field Officer
268 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
205 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
177 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Territory Manager
171 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Tractors and Farm Equipment with

Mahindra Farm Equipment

4.0
Compare

Sonalika Tractors

3.6
Compare

John Deere

4.1
Compare

Escorts Kubota Limited

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview