Add office photos
Filter interviews by
Tafe Motors & Tractors CAD Engg Interview Questions and Answers
Tafe Motors & Tractors CAD Engg Interview Experiences
1 interview found
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2024. There was 1 interview round.
(3 Questions)
- Q1. How to handle the critical Switchvation
- Ans.
Switchvation is a critical situation where a switch in design or process is necessary to overcome a problem.
Identify the root cause of the issue that requires the switch.
Evaluate the impact of the switch on the overall design or process.
Communicate with stakeholders about the need for the switch and the potential benefits.
Implement the switch carefully, ensuring minimal disruption to the project.
Monitor the effects of
- Q2. File extantion format
- Q3. How to approach the client
- Ans.
Approach the client by understanding their needs, building rapport, and offering solutions.
Research the client's background and needs before the meeting.
Listen actively to the client's requirements and concerns.
Communicate clearly and confidently about your services and expertise.
Offer tailored solutions that address the client's specific needs.
Follow up with the client to ensure satisfaction and maintain a good relati
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Mechanical Engg. Design Interview Questions & Answers
Hyundai Motor India Limited
Anonymous
posted on 8 Sep 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
(3 Questions)
- Q1. What is the capacity of diesel and petrol
- Ans.
Diesel has higher energy density than petrol, resulting in better fuel efficiency.
Diesel has a higher energy density than petrol, meaning it can provide more energy per unit volume.
Petrol is more volatile and burns faster than diesel.
The capacity of diesel and petrol tanks in vehicles can vary depending on the size of the vehicle and its fuel efficiency.
For example, a typical car may have a petrol tank capacity of arou...
- Q2. Difference b/w petrol engine & diesel engine
- Ans.
Petrol engines use spark ignition, while diesel engines use compression ignition.
Petrol engines use a spark plug to ignite the fuel-air mixture, while diesel engines rely on compression to ignite the fuel.
Petrol engines are lighter and more responsive, while diesel engines are more fuel-efficient and have higher torque.
Petrol engines are more common in cars and motorcycles, while diesel engines are often used in trucks
- Q3. What is meant by LNTD
- Ans.
LNTD stands for Logarithmic Mean Temperature Difference.
LNTD is a term used in heat transfer calculations to determine the overall temperature difference between two fluids in a heat exchanger.
It is calculated using the formula LNTD = (ΔT1 - ΔT2) / ln(ΔT1 / ΔT2), where ΔT1 and ΔT2 are the temperature differences at the two ends of the heat exchanger.
LNTD is important in designing efficient heat exchangers to maximize h...
Interview Preparation Tips
- Thermodynamics
- mettalurgy
- Thermal Engineering
For example : In hyundai interview HR Asked all question mostly engine related and thermodynamics related questions only
Selected
I applied via campus placement at Kusuma Dei Satsangh Womens College, Darkhapatna and was interviewed in Oct 2024. There were 2 interview rounds.
Some general knowledge based
Ev or crude oil which is best for future
CAD CAM Engineer Interview Questions & Answers
Toyota Kirloskar Motor
Vinayak Ganiger
posted on 31 Mar 2024
Selected
I applied via Job Portal and was interviewed in Oct 2023. There was 1 interview round.
(2 Questions)
- Q1. Whats your strength
- Q2. I know my weakness
Interview Preparation Tips
I applied via campus placement at National Institute of Engineering (NIE) and was interviewed in Jul 2022. There was 1 interview round.
(3 Questions)
- Q1. What are the type of sections
- Ans.
Sections in mechanical engineering design refer to the shapes of cross-sections of structural members.
Sections can be classified as open or closed.
Open sections have an opening or a void in the cross-section, such as a C-channel or an I-beam.
Closed sections have a continuous cross-section, such as a rectangular or circular tube.
Sections can also be classified based on their shape, such as square, rectangular, circular,...
- Q2. What is centre of gravity? write the formula to calculate it for an assymetrical I section
- Ans.
Centre of gravity is the point where the entire weight of an object can be considered to act upon. Formula for an asymmetrical I section is (A1*d1 + A2*d2)/(A1+A2)
Centre of gravity is important in designing structures and machines to ensure stability and balance
It is the point where the object will balance perfectly in any orientation
For an asymmetrical I section, the formula is (A1*d1 + A2*d2)/(A1+A2) where A1 and A2 ...
- Q3. Draw sfd and bmd for a simple cantilever beam
- Ans.
Draw sfd and bmd for a simple cantilever beam
SFD shows the variation of shear force along the length of the beam
BMD shows the variation of bending moment along the length of the beam
Shear force is maximum at the fixed end and zero at the free end
Bending moment is maximum at the free end and zero at the fixed end
Interview Preparation Tips
S Sasi
I applied via Recruitment Consulltant and was interviewed before Jun 2023. There was 1 interview round.
(2 Questions)
- Q1. What Is GD&T,what are the types
- Ans.
GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.
GD&T is a system used to define and communicate engineering tolerances for design and manufacturing.
It uses symbols, such as concentricity, flatness, and perpendicularity, to specify geometric characteristics of parts.
There are different types of GD&T symbols, including form, orientation, profile, and ...
- Q2. Why GD&T Required
- Ans.
GD&T is required for clear communication of design intent, ensuring parts are manufactured accurately and consistently.
GD&T allows for more precise and detailed communication of design requirements compared to traditional dimensioning methods.
It helps to reduce ambiguity and interpretation errors in engineering drawings.
GD&T ensures that parts are manufactured accurately and consistently, leading to improved quality an...
Skills evaluated in this interview
Mechanical Engg. Design Interview Questions & Answers
Hyundai Motor India Limited
Anonymous
posted on 11 May 2017
I was interviewed before May 2016.
Interview Preparation Tips
Experience: It was a straight forward paper with easy technical questions.
Most of the questions were very practical and could be related to.
Not much preparation is required for this but answering to the point is expected.
Tips: All the technical questions are the same as the Mechanical courses done in colleges. Some of the logical questions are a bit tricky but with a little practice it shouldn't be a problem.
Duration: 1 hour
Total Questions: 25
Skills: Technical Knowledge(ML, Logical Reasoning
College Name: PVP Siddhartha Institute Of Technology (PVPSIT) Vijayawada
(2 Questions)
- Q1. Shrar stressde fine
- Q2. Types of materials
- Ans.
There are various types of materials used in Auto CAD design, including metals, plastics, ceramics, and composites.
Metals
Plastics
Ceramics
Composites
(2 Questions)
- Q1. Draw SS daigram
- Ans.
SS diagram is a schematic representation of a system showing the flow of data
Identify the main components of the system
Show the connections between the components
Use standard symbols for clarity and consistency
- Q2. Expalin case study
Interview Preparation Tips
Selected
I applied via Campus Placement and was interviewed in Oct 2023. There were 2 interview rounds.
(3 Questions)
- Q1. Any books but ic engine
- Q2. Like Newton's 1st 2nd 3rd low
- Q3. Technical questions
Interview Preparation Tips
I applied via Walk-in and was interviewed in Aug 2022. There were 3 interview rounds.
(2 Questions)
- Q1. How was run the machines
- Q2. Workers are daily coming or not
(1 Question)
- Q1. Any technical issues or problems are there in computers
- Ans.
Yes, there are technical issues and problems in computers.
Hardware failures such as hard drive crashes or overheating
Software bugs and glitches
Security vulnerabilities and hacking
Compatibility issues with different operating systems or software
Slow performance due to insufficient memory or processing power
Interview Preparation Tips
Tafe Motors & Tractors Interview FAQs
Tell us how to improve this page.
Tafe Motors & Tractors Interviews By Designations
- Tafe Motors & Tractors Assistant Manager Interview Questions
- Tafe Motors & Tractors Field Officer Interview Questions
- Tafe Motors & Tractors Junior Manager Interview Questions
- Tafe Motors & Tractors Account Assistant Interview Questions
- Tafe Motors & Tractors Area Sales Manager Interview Questions
- Tafe Motors & Tractors Area Service Incharge Interview Questions
- Tafe Motors & Tractors Assistant Engineer 2 Interview Questions
- Tafe Motors & Tractors Assistant Officer Interview Questions
- Show more
Interview Questions for Popular Designations
- Mechanical Engg. Design Interview Questions
- CAD Design Engineer Interview Questions
- Cadd Engineer Interview Questions
- Auto CAD Engineer Interview Questions
- Sr. CAD Engineer Interview Questions
- Auto CAD Designer Interview Questions
- Junior CAD Engineer Interview Questions
- CAD CAM Engineer Interview Questions
- Show more
Tafe Motors & Tractors CAD Engg Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Fast track your campus placements
|
Assistant Manager
190
salaries
|  ₹6.6 L/yr - ₹14.7 L/yr |
|
Junior Manager
175
salaries
| ₹4.5 L/yr - ₹10 L/yr |
|
Diploma Trainee Engineer
86
salaries
| ₹1 L/yr - ₹2.5 L/yr |
|
Deputy Manager
84
salaries
| ₹10 L/yr - ₹16 L/yr |
|
Project Officer
59
salaries
| ₹1.5 L/yr - ₹4.5 L/yr |
Mahindra & Mahindra
Escorts Kubota Limited
Sonalika Tractors
John Deere
- Home >
- Interviews >
- Tafe Motors & Tractors Interview Questions >
- Tafe Motors & Tractors CAD Engg Interview Questions
