Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Synergy Marine Group Electrical Engineer Interview Questions, Process, and Tips

Updated 14 Jun 2024

Synergy Marine Group Electrical Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in May 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

I am good person with hot wark and sense main

Round 2 - Coding Test 

I am good person with hot wark and

Round 3 - Aptitude Test 

ELECTRO TECHNICAL OFFICER hot wark

Round 4 - Technical 

(13 Questions)

  • Q1. Winch windalas fwd side find out
  • Q2. Smoke detector repearing whith find out
  • Q3. Gallery hot palet insulation find out
  • Ans. 

    Gallery hot palet insulation is used to prevent heat loss and protect surrounding materials.

    • Gallery hot palet insulation is typically made of materials like fiberglass, mineral wool, or foam.

    • The insulation is applied to the walls, ceiling, and floor of the gallery to create a barrier against heat transfer.

    • Proper insulation helps maintain a consistent temperature inside the gallery and reduces energy costs.

    • Examples of i...

  • Answered by AI
  • Q4. Ecr engine crane deyd conditioner find out
  • Ans. 

    The question seems to be asking about how to determine the condition of an ECR engine crane's air conditioner.

    • Check the air conditioner unit for any visible damage or leaks

    • Test the air conditioner for proper functioning by turning it on and checking for cold air

    • Inspect the air filters and clean or replace them if necessary

  • Answered by AI
  • Q5. Gangwey ledder deyd condition find out
  • Q6. Refer socket chenge and repering and insulation find out
  • Q7. Motor insulation cheked good condition
  • Q8. Mgps capper cheked good condition
  • Ans. 

    The Mgps capper was checked and found to be in good condition.

    • Ensure all components of the Mgps capper are functioning properly

    • Check for any signs of wear or damage

    • Test the capper on various bottles to confirm its performance

    • Verify that the capper is calibrated correctly

  • Answered by AI
  • Q9. Navigation light cheked find out
  • Q10. Batteriy cheked good condition
  • Q11. Tarnnig gear dayd condition find out
  • Q12. ECB air strikes breakar find out
  • Ans. 

    ECB air strikes breakar find out

    • ECB stands for European Central Bank, not related to air strikes

    • Breakar may refer to a circuit breaker or a device used to interrupt an electric circuit

    • Need more context to understand the question

  • Answered by AI
  • Q13. Emergency generator not start find out

Interview Preparation Tips

Interview preparation tips for other job seekers - APPLY FOR RANK ETO ELECTRO TECHNICAL OFFICER NAME RAM SINGH CHAUHAN

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jan 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Question asked were more on resume i.e. projects and internships. Some technicals were also asked.

Interview Preparation Tips

Interview preparation tips for other job seekers - Explain your answer throughly.

I applied via Company Website and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Conduct technical interview and aptitude test

Interview Preparation Tips

Interview preparation tips for other job seekers - Sinciarity, calm, faithfully, honestly to doing in sastainbility in your profession.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Aug 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Prepare for aptitude

Round 3 - Technical 

(2 Questions)

  • Q1. Process improvement, HAZOP, SIL
  • Q2. ERP, DCS operation
Round 4 - HR 

(1 Question)

  • Q1. Compensation and benefits

Interview Preparation Tips

Interview preparation tips for other job seekers - Your initial compensation should be good enough

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Proove you are eligible for achive targate and focused to job.

Interview Preparation Tips

Interview preparation tips for other job seekers - Dedicated person take own responsibility and empowered to sign checks on his behalf and his embition was to become a model.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I was interviewed before Mar 2022.

Round 1 - Technical 

(1 Question)

  • Q1. Regarding profile related experience
Round 2 - One-on-one 

(1 Question)

  • Q1. Technical questions and other field

Interview Preparation Tips

Interview preparation tips for other job seekers - Nice journey good feeling one to one every round clear and healthy atmosphere
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant

Round 1 - Technical 

(2 Questions)

  • Q1. Gauging calculation
  • Q2. Shipment handling
Round 2 - One-on-one 

(2 Questions)

  • Q1. Professional experience
  • Q2. Emergency situations

Interview Preparation Tips

Topics to prepare for Indian Molasses Company Senior Engineer interview:
  • Technical
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Job Portal and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. Which type of electrode is used in P91 welding?
  • Ans. 

    P91 welding typically uses a low hydrogen type electrode.

    • Low hydrogen type electrode is commonly used in P91 welding

    • The electrode helps prevent hydrogen-induced cracking in the weld

    • Examples of low hydrogen electrodes include E7018 and E7016

  • Answered by AI
  • Q2. What is PWHT??
  • Ans. 

    PWHT stands for Post Weld Heat Treatment, a process used to relieve residual stresses and improve the mechanical properties of welded joints.

    • PWHT involves heating the welded joint to a specific temperature for a certain period of time, followed by controlled cooling.

    • The process helps to reduce hardness, increase ductility, and improve toughness of the welded joint.

    • PWHT is commonly used in industries such as oil and gas...

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. Technical and previous job roles and responsibilities
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(14 Questions)

  • Q1. There lemp motor
  • Q2. Generator mai engen warming
  • Q3. Oil mist detectors work
  • Ans. 

    Oil mist detectors work by sensing the presence of oil mist in the air to prevent potential hazards in machinery.

    • Oil mist detectors use optical sensors to detect the presence of oil mist particles in the air.

    • They are commonly used in industries like marine, power generation, and manufacturing to prevent machinery breakdowns or fires.

    • When oil mist is detected, the system triggers an alarm or shuts down the machinery to ...

  • Answered by AI
  • Q4. Oily sapretor watat warming
  • Q5. Odms thank detectors working
  • Q6. Oil contect monitoring system
  • Q7. Bareshlesh generator engines warming
  • Q8. Alarm monitoring system
  • Q9. Mgps colorinaition type
  • Ans. 

    Mgps colorinaition type refers to the color coding used in Multi-Grounded Power Systems.

    • Mgps colorinaition type is used in Multi-Grounded Power Systems to differentiate between different grounding points.

    • Color coding helps in easily identifying the grounding points and ensures proper grounding connections.

    • Examples of color coding in Mgps colorinaition type include green for equipment grounding, yellow for isolated grou

  • Answered by AI
  • Q10. U.v sterelizer system filters watar
  • Q11. Plc bolak diagram systems
  • Q12. Exhaust bailar operation wark's
  • Q13. Sci rareble current to wark's
  • Ans. 

    The question seems to be asking about the concept of alternating current in electrical engineering.

    • The question may be referring to the concept of alternating current (AC) in electrical engineering.

    • AC is a type of electrical current where the flow of electric charge periodically reverses direction.

    • AC is commonly used in homes and businesses to power electrical devices.

    • Examples of devices that use AC include refrigerato

  • Answered by AI
  • Q14. Vfd mandated current wark's

Interview Preparation Tips

Topics to prepare for Mediterranean Shipping Company Electrical Engineer interview:
  • Electrical Engineering
Interview preparation tips for other job seekers - APPLY FOR RANK ETO ELECTRO TECHNICAL OFFICER TRAINING NAME RAM SINGH CHAUHAN DATE OF AVAILABILITY 26 09 26
Contribute & help others!
anonymous
You can choose to be anonymous

Synergy Marine Group Interview FAQs

How many rounds are there in Synergy Marine Group Electrical Engineer interview?
Synergy Marine Group interview process usually has 4 rounds. The most common rounds in the Synergy Marine Group interview process are Aptitude Test, Coding Test and Technical.
What are the top questions asked in Synergy Marine Group Electrical Engineer interview?

Some of the top questions asked at the Synergy Marine Group Electrical Engineer interview -

  1. Ecr engine crane deyd conditioner find ...read more
  2. Gallery hot palet insulation find ...read more
  3. ECB air strikes breakar find ...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

INTERVIEWS

Siemens Healthineers

No Interviews

INTERVIEWS

Siemens Healthineers

No Interviews

INTERVIEWS

Siemens Healthineers

No Interviews

INTERVIEWS

Synergy Marine Group

No Interviews

INTERVIEWS

AppInventiv Technologies

No Interviews

Tell us how to improve this page.

Synergy Marine Group Electrical Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

CMA CGM Interview Questions
4.0
 • 91 Interviews
Hapag-Lloyd Interview Questions
3.8
 • 23 Interviews
J.M Baxi & Co Interview Questions
4.0
 • 12 Interviews
Cochin Shipyard Interview Questions
4.2
 • 12 Interviews
View all
Purchase Executive
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Executive Accountant
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Procurement Executive
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Company Secretary
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Synergy Marine Group with

Great Eastern Shipping Company

4.2
Compare

Mercator

3.8
Compare

Essar Shipping

4.1
Compare

Shreyas Shipping Logistics

3.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview