AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sunbeam Auto Quality Inspection Engineer Interview Questions and Answers
Sunbeam Auto Quality Inspection Engineer Interview Experiences
1 interview found
Interview Questionnaire
1 Question
- Q1. About Manufacturing, Recycling, Production, Quality, and Safety
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Exam's are conducted
(3 Questions)
- Q1. How quality is improved
- Ans.
Quality is improved through continuous monitoring, process improvement, employee training, and customer feedback.
Continuous monitoring of processes and products to identify and address any quality issues
Implementing process improvement initiatives to streamline operations and reduce defects
Providing regular training to employees to enhance their skills and knowledge
Seeking and incorporating customer feedback to underst...
- Q2. What all impliment can done by quality inspector
- Ans.
A quality inspector can implement various measures to ensure product quality.
Conducting inspections and audits to identify defects or non-compliance
Developing and implementing quality control procedures
Testing and analyzing samples to ensure they meet quality standards
Monitoring production processes to identify areas for improvement
Collaborating with other departments to address quality issues
Documenting and reporting
- Q3. How line willbe handled by quality inspector
- Ans.
The quality inspector will handle the line by conducting inspections, ensuring compliance with quality standards, and addressing any issues or defects.
Conduct regular inspections of the production line to check for quality issues
Ensure compliance with quality standards and specifications
Identify and address any defects or non-conformities
Collaborate with production team to resolve quality-related problems
Document and r...
Quality Inspector Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Anonymous
posted on 3 Apr 2024
Selected
I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.
(2 Questions)
- Q1. 5 s Quality control poka yoka
- Q2. 7 qc tools ppm
Quality inspector fainal lain part cheking
Interview Preparation Tips
Quality Inspector Interview Questions & Answers
Bosch Chassis Systems
Anonymous
posted on 29 Apr 2024
Aptitude test base on basic of engineering
(3 Questions)
- Q1. 5s ,TMP ,Kaizen
- Q2. What is Quality means?
- Ans.
Quality means meeting or exceeding customer expectations by consistently delivering products or services that are free from defects and meet specified requirements.
Quality is about meeting customer expectations and delivering products or services that are free from defects.
It involves consistently meeting specified requirements and standards.
Quality is achieved through effective quality control measures and continuous ...
- Q3. What is Gd and t
- Ans.
GD&T stands for Geometric Dimensioning and Tolerancing, a system for defining and communicating engineering tolerances.
GD&T is a symbolic language used on engineering drawings to specify the allowable variations in form, size, and orientation of features.
It uses symbols, such as squares, circles, and triangles, to define the tolerance zones for features on a part.
GD&T helps ensure that parts are manufactured to the cor...
Interview Preparation Tips
Skills evaluated in this interview
Selected
I applied via Company Website and was interviewed in May 2023. There were 2 interview rounds.
Quality management and customer delight
Mechanical all measurements instrument
Interview Preparation Tips
I applied via Walk-in and was interviewed in Aug 2022. There was 1 interview round.
(1 Question)
- Q1. What about your self Working experience Previous company work details
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Apr 2022. There were 2 interview rounds.
P.C.M,tecnical question & General knowledge
I made a rolling breaker who rotate on his axis when any vehicals over him than rotational energy convert electric energy thus we produce electric energy through road breaker.
Interview Preparation Tips
I applied via Company Website and was interviewed in Feb 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What are your salary expectations?
- Q2. Tell me about yourself.
Interview Preparation Tips
- Diploma
- Quality Inspection
Mob no : XXXXX
Experience : 1year
Worked in : Indo-Mim Pvt Ltd Hoskote Banglore
Selected
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 2 interview rounds.
(4 Questions)
- Q1. Technical questions
- Q2. 5S and types of Row meterial plastics engineering
- Ans.
5S is a method for organizing a workplace for efficiency and effectiveness. Types of raw material plastics in engineering include thermoplastics and thermosets.
5S is a workplace organization method that stands for Sort, Set in Order, Shine, Standardize, and Sustain.
Types of raw material plastics in engineering include thermoplastics (e.g. polyethylene, PVC) and thermosets (e.g. epoxy, phenolic).
Properly organizing raw ...
- Q3. Privious company experience knowledge
- Q4. Defect of plastic engineering quality
- Ans.
Defects in plastic engineering quality can include issues such as warping, sink marks, flash, and flow marks.
Warping: Deformation of the plastic part due to uneven cooling or poor mold design.
Sink marks: Depressions on the surface of the part caused by uneven cooling or thick sections.
Flash: Excess material that escapes from the mold during the injection molding process.
Flow marks: Visible lines or streaks on the surfa...
Interview Preparation Tips
Quality Inspector Interview Questions & Answers
Motherson Automotive Technologies and Engineering
Anonymous
posted on 20 Apr 2021
I was interviewed in Mar 2021.
Interview Questionnaire
7 Questions
- Q1. What is control chart???
- Ans.
A control chart is a statistical tool used to monitor and control a process over time.
It helps to identify and analyze variations in a process.
It consists of a central line representing the average value and upper and lower control limits.
Data points falling outside the control limits indicate special causes of variation.
Common types of control charts include X-bar and R charts, X-bar and S charts, and p charts.
Control...
- Q2. How you give setup approval during set-up change?
- Q3. Principal of vernier caliper?
- Ans.
The principle of vernier caliper is based on the concept of vernier scale and the ability to measure small distances accurately.
Vernier caliper is a measuring instrument used to measure the dimensions of an object with high precision.
It consists of a main scale and a sliding vernier scale, which allows for more accurate measurements.
The principle behind vernier caliper is that the vernier scale has a smaller division t...
- Q4. Your last job profile and responsibilities.
- Q5. Why we should hire you?
- Q6. What are the no. Of angle of projection in drawing?
- Ans.
The number of angles of projection in a drawing depends on the specific requirements and complexity of the object being depicted.
The number of angles of projection can vary depending on the purpose of the drawing.
Common angles of projection include front view, top view, side view, and isometric view.
Additional angles may be required for complex objects or to show specific details.
The number of angles can also depend on...
- Q7. In which angle of projection drawing should be prepared?
- Ans.
The angle of projection drawing should be prepared in the third angle projection.
The third angle projection is commonly used in engineering and technical drawings.
In third angle projection, the object is placed in the third quadrant of the orthographic projection.
The top view is placed above the front view, and the right side view is placed to the right of the front view.
This method is widely adopted in many countries ...
Interview Preparation Tips
Tell us how to improve this page.
Sunbeam Auto Interviews By Designations
- Sunbeam Auto DET Interview Questions
- Sunbeam Auto Quality Inspector Interview Questions
- Sunbeam Auto Assistant Engineer Interview Questions
- Sunbeam Auto DET Trainee Interview Questions
- Sunbeam Auto Diploma Trainee Engineer Interview Questions
- Sunbeam Auto Quality Engineer Interview Questions
- Sunbeam Auto Apprentice Engineer Interview Questions
- Sunbeam Auto Assistant Maintenance Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
- Inspection Engineer Interview Questions
- Senior Inspection Engineer Interview Questions
- Third Party Inspection Engineer Interview Questions
- Quality Inspection Trainee Interview Questions
- Quality Inspector Interview Questions
- Quality Inspection Supervisor Interview Questions
- Tpi Inspection Engineer Interview Questions
- QC Inspector Interview Questions
- Show more
Interview Questions from Similar Companies
Fast track your campus placements
|
Assistant Engineer
167
salaries
|  ₹2.1 L/yr - ₹5.4 L/yr |
|
Engineer
152
salaries
| ₹2 L/yr - ₹7 L/yr |
|
Senior Engineer
144
salaries
| ₹3.5 L/yr - ₹7.8 L/yr |
|
Assistant Manager
131
salaries
| ₹4 L/yr - ₹10 L/yr |
|
Quality Engineer
121
salaries
| ₹1.5 L/yr - ₹5.1 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Ashok Leyland
- Home >
- Interviews >
- Sunbeam Auto Interview Questions >
- Sunbeam Auto Quality Inspection Engineer Interview Questions
