AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Sujan Cooper Standard Antivibration Systems Post Graduate Engineer Trainee [pget] Interview Questions, Process, and Tips
Sujan Cooper Standard Antivibration Systems Post Graduate Engineer Trainee [pget] Interview Experiences
1 interview found
I applied via Campus Placement and was interviewed in Nov 2021. There were 4 interview rounds.
Interview Questionnaire
4 Questions
- Q1. What is Transmissibility?
- Ans.
Transmissibility is the ability of a system to transmit or transfer energy from one point to another.
It is a measure of the efficiency of energy transfer in a system.
It is often used in mechanical engineering to describe the behavior of vibration isolation systems.
Transmissibility is expressed as a ratio of output to input.
A high transmissibility means that a system is transmitting a lot of energy, while a low transmis...
- Q2. What is a stress strain curve for MS during loading?
- Ans.
A stress strain curve for MS during loading shows the relationship between stress and strain in the material.
The curve has three distinct regions: elastic, plastic, and fracture.
In the elastic region, stress is proportional to strain.
In the plastic region, the material deforms permanently.
The fracture region is where the material breaks.
The curve can be used to determine the material's yield strength, ultimate strength
- Q3. Why rubber is used in vibration isolation why not steel?
- Ans.
Rubber is used in vibration isolation due to its ability to absorb shock and dampen vibrations.
Rubber has high elasticity and can deform under pressure, which helps to absorb shock and dampen vibrations.
Steel is a rigid material and does not have the same ability to absorb shock and dampen vibrations as rubber.
Rubber is also lightweight and easy to install, making it a practical choice for vibration isolation applicati...
- Q4. What is a critical damping?
- Ans.
Critical damping is the minimum amount of damping required to prevent oscillation in a system.
It is a type of damping that results in the fastest possible return to equilibrium without oscillation.
It is used in engineering to prevent damage to structures and machinery.
Examples include shock absorbers in cars and buildings designed to withstand earthquakes.
It is calculated using the natural frequency of the system and t...
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Vivek dubey
Selected
I applied via Approached by Company and was interviewed before Apr 2023. There were 2 interview rounds.
(3 Questions)
- Q1. About your role and responsibilities
- Q2. Why do you want change your job
- Q3. What is your current Salary and expectations
About your role and responsibilities and technical questions from your cv
Interview Preparation Tips
- Technical Skills
Assistant Store Manager Interview Questions & Answers
Kiswok Industries
Anonymous
posted on 29 Jan 2021
I applied via Naukri.com and was interviewed in Sep 2020. There were 6 interview rounds.
Interview Questionnaire
1 Question
- Q1. Self introduction , Invention level , Questions about purchase & stores activities.
Interview Preparation Tips
Interview Questionnaire
4 Questions
- Q1. Tell me about yourself?
- Ans.
I am a highly motivated and experienced professional with a passion for innovation and problem-solving.
I have a degree in engineering and have worked in the field for over 10 years.
I have experience leading cross-functional teams and managing complex projects.
I am skilled in data analysis and have a strong understanding of emerging technologies.
I am a quick learner and thrive in fast-paced environments.
I am committed t...
- Q2. What are your strength and weaknesses?
- Ans.
My strength lies in my ability to adapt quickly to new situations and my weakness is that I tend to be too self-critical.
Strength: Adaptability, quick learner
Weakness: Self-criticism
Example for strength: I was able to quickly learn and adapt to a new software program at my previous job, which helped increase efficiency in the department.
Example for weakness: I tend to be too hard on myself when I make mistakes, which c
- Q3. Thesis-based
- Q4. Project-based
Interview Preparation Tips
Experience: Mostly Solid Mechanics profiles were shortlisted.
Tips: Actually, they were looking for experienced people, who already have a job experience of a year or two. Though they asked for a written test initially but later on, them shortlisted the candidates based on. They were keen to take students who had some kind of job experience (for MTech candidates) or internship.
Round: HR Interview
Experience: First I introduced about myself, my family background, my hobbies and my qualities. I told them that I like to travel a lot and gave an example as when I was in Europe I travelled some 6-7 countries even I had to spend my own money. Since they were first time in the campus so they didn’t know about foreign internships. They were fascinated by the fact that I have international exposure. They asked about my purpose of being in Europe. I told them about internship, they liked it and asked questions related to that as of who paid for you and the university.
Tips: It helps if you asked some questions to them during presentation or interview, they value and remember it. I asked a question during presentation and about the job location during interview. When I asked them this question in interview then they told me that you were the guy who asked one question during presentation.
Finally they asked me if I would be comfortable in Chennai. I replied them positively this time.
Round: Technical Interview
Experience: Thesis: They wanted to know how my work and thesis could be of their use. It was related to polymer and I told them it will be of help in seat chamber design. You should be able to convince them that whatever you are doing is of use to them. I was working in Abacus. They were impressed with this and asked if I am asked to work on Ansys, Fluent, will I be able to do so. I gave them a positive reply.
Project: They were highly impressed with one of my projects on “Adamas” which I did in my 2nd year. This was the thing which they were looking for. They asked some technical questions as how did you simulate the track and where did you apply force. I answered their questions with confidence and they were impressed. You may like to give priorities to your projects based on company profile and requirement. So by this time they were very impressed by me and I was kind of getting the feeling that they will hire me.
General Tips: Do ask questions to them during interview or presentation in a different fashion, may be related to your job profile or anything which is bothering you.
Skill Tips: Organize mock GD's in wings.
Prepare some common HR questions like “Tell me about yourself”, strengths and weakness, your hobbies and prepare this question in written.
Skills: Basic behavioural questions.
College Name: IIT- Kanpur
Interview Preparation Tips
Experience: Online test - elementary questions
Round: Other Interview
Experience: Personal Interview- based on your areas of interest (make sure you know that area which you choose to be your favourite)
General Tips: The PI was tricky he started off from the very basic stuff and started going into topics I was uncomfortable with but then again I was lucky so they did not go to topics which I actually did not know. Better be ready for the worst, if you prepare well you are definitely guaranteed a job.
Skill Tips: Go through a wide variety of topics because most of the companies assess you mostly on the GD. By being prepared you will be able to deal with it easily. Try to ace the subjects you are good at. They don't want a Jack of all trades but a master of one.
College Name: NIT SURATHKAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Daimler
Arvind Mishra
posted on 31 Mar 2015
Interview Questionnaire
8 Questions
- Q1. Tell me about yourself (most common question)
- Q2. What did you learn from the GD?
- Ans.
I learned how to effectively communicate and collaborate with a diverse group of individuals.
Importance of active listening
Respect for differing opinions
Effective communication skills
Teamwork and collaboration
Conflict resolution
Leadership skills
- Q3. Tell me about your project work and intern
- Ans.
I have worked on various projects and internships related to software development.
Developed a web application for a local business using React and Node.js
Interned at a software company and worked on their mobile app development team
Collaborated with a team to create a chatbot using Python and Natural Language Processing
Created a personal project using Java to automate a task for a non-profit organization
- Q4. What is your hobby?
- Ans.
My hobby is playing guitar.
I enjoy learning new songs and practicing techniques.
I often play for friends and family.
I attend local open mic nights to perform in front of an audience.
I also enjoy writing my own music and lyrics.
- Q5. Quite a few questions regarding hobby
- Q6. Preference for a particular segment in the compnay
- Ans.
I do not have a preference for a particular segment in the company.
I am open to working in any segment of the company.
I believe that every segment has its own unique challenges and opportunities.
I am willing to learn and adapt to any segment that I am assigned to.
- Q7. And many more related to each other....
- Q8. No specific Technical question
Interview Preparation Tips
Experience: Exam was online mode conducted by AMCAT
4 sections in total Apti , English ,Numerical Ability , Technical
Random questions no negative marking
Had to answer each question before moving to the next one
Tips: Study the basics of Industrial Management and CAD/CAM which is generally neglected by mechanical guys
lot of question is asked from these subjects in all exams conducted by AMCAT
Time management is very important because you don`t know whether the next question is easy or not
Duration: 120 mins minutes
Total Questions: 100
Round: Group Discussion
Experience: There were 8 people in each group .
Overall the GD was quite good. I was the 3rd speaker. The real life examples and the facts which i put fetched me lot of marks.
Tips: ****** Make sure it is a GD not a debate!!! You can`t force your view on someone.
Show respect to everyone`s view.
Content matters not the sequence in which you speak but should try to speak early if you have the points.
Don`t repeat others point.
Try to get an overall conclusion of the discussion GD has a very lasting impression on interviewer so give your best in GD
Duration: 25 mins minutes
Round: HR Interview
Experience: The interviewer was quite impressed by my performance in the GD.He was very supportive not like few of those.....
I told my hobby is playing football and reading Indian History books(thinking that since the interviewer is GERMAN,he would be easy to handle ...).
But he knew very much about India and the answers which i gave matched mine and his natural frequency!!!
There was another guy who was just smiling and texting.
German guy asked me to ask few questions if i had any . I asked quite a few of them regarding company.
The thing which made my day was when i was done with the interview. He stood up shook hands and then said
"Your selection depends on how others perform!!But you stand a very good chance. Hope to see you on the board"
Tips: >Be what you are.
>Try to be in your comfort zone and make the interviewer to ask you in those areas.
>We were working on an elevator system to be installed in library as our final year project which seemed quite interesting to him.
>Rejection teaches you a lot , don`t loose hope
> This was my 4th company and 3rd PI
Round: Technical Interview
Experience: Only 1-2 tech questions related to my project work
Tips: Just HR interview can also fetch you a job !!!
College Name: NIT DURGAPUR
Motivation: I always wanted to work in an automobile company.
Facing back to back rejections in 2 automobile companies was a setback but this provided me with another opportunity to get into AUTOMOBILE
Funny Moments: >My 1st rejection was in L&T all PI questions were related to Material Science which i had never touched !!!
I went on telling "we have not been taught this topic!!"
seeing my performance the interviewer told me " ya to tum nhin padhte ya fir college wale nahin padhate "
Graduate Engineer Trainee (Get) Interview Questions & Answers
Daimler
Anonymous
posted on 13 Apr 2015
Interview Preparation Tips
Experience: C Online Test
General Tips: It was a very good learning experience.
Skill Tips: Try to ace the subjects you are good at. They don't want a Jack of all trades but a master of one.
College Name: NIT SURATHKAL
Graduate Engineer Trainee (Get) Interview Questions & Answers
Daimler
Satyajit Roy
posted on 31 Mar 2015
Interview Questionnaire
7 Questions
- Q1. Tell me about yourself
- Ans.
I am a driven and passionate individual with a diverse background in marketing and project management.
I have experience leading cross-functional teams to achieve project goals
I am skilled in developing and executing marketing strategies
I am a strong communicator and enjoy collaborating with others
I am always seeking new challenges and opportunities for growth
- Q2. What do u hate about India?
- Q3. What's your opinion about Indian political scenario?
- Ans.
The Indian political scenario is complex and often controversial.
There is a lot of corruption in the political system
There are many different political parties with varying ideologies
The ruling party has been criticized for its handling of certain issues, such as the economy and social justice
There are ongoing tensions between India and neighboring countries, which also affect the political climate
The Indian political ...
- Q4. Why DICV?
- Ans.
DICV is a leading commercial vehicle manufacturer in India.
DICV has a strong reputation for quality and reliability.
They offer a wide range of commercial vehicles to meet diverse customer needs.
DICV has a strong focus on innovation and sustainability.
They have a strong dealer network and provide excellent after-sales service.
DICV is committed to supporting the growth of the Indian economy through their products and ser
- Q5. In which section do u wanna work?
- Ans.
I am interested in working in the marketing department.
I have experience in creating marketing campaigns
I am skilled in social media marketing
I am interested in learning more about branding and advertising
I believe my creativity and communication skills would be an asset to the team
- Q6. What's your hobby? reason behind it?
- Ans.
My hobby is playing guitar. It helps me relax and express myself creatively.
Playing guitar helps me unwind after a long day
I enjoy learning new songs and techniques
It allows me to express myself creatively
Playing with others is a great way to socialize
I love the feeling of accomplishment when I master a difficult piece
- Q7. What do you love to do?
- Ans.
I love to read and explore new places.
Reading books on various topics
Traveling to different countries and experiencing new cultures
Trying out new cuisines
Visiting museums and historical sites
Interview Preparation Tips
Experience: Test was conducted by AMCAT. So different sets.Difficulty level was medium but depending on set, subject priority changes.Need to be a little quicker.
Tips: Try to save time wherever possible for a lengthy problem or to read a passage.
Duration: 95 minutes
Total Questions: around 85
Round: Group Discussion
Experience: One German guy was there and we were 8 candidates in a group. Provided enough time so they everyone can express their view clearly.
Tips: Be careful about your body language and cooperate with others.
Round: HR Interview
Tips: Just be honest and be yourself.
College Name: NIT DURGAPUR
I applied via Walk-in and was interviewed before Mar 2021. There was 1 interview round.
(1 Question)
- Q1. Tell me about yourself Least count of vernier calliper and micrometer Conversation of meter to centimetres,foots and inches Why should I appoint you Do you comfortable for rotational shifts
Interview Preparation Tips
I applied via Referral and was interviewed in Sep 2020. There were 3 interview rounds.
Interview Questionnaire
1 Question
- Q1. Tell me about yourself?
Sujan Cooper Standard Antivibration Systems Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Post Graduate Engineer Trainee Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Post Graduate Teacher Interview Questions
- Post Graduate Student Interview Questions
- Graduate Trainee Interview Questions
- Graduate Engineer Interview Questions
- Production Graduate Engineer Trainee Interview Questions
- Graduate Apprentice Trainee Interview Questions
- Show more
Interview Questions from Similar Companies
|
Associate Manager
13
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Quality Engineer
11
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Assistant Manager
8
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Senior Executive
7
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Production Manager
6
salaries
| ₹0 L/yr - ₹0 L/yr |
Kiswok Industries
Sundaram Motors
Pps Motors
Rajesh Motors
- Home >
- Interviews >
- Sujan Cooper Standard Antivibration Systems Interview Questions >
- Sujan Cooper Standard Antivibration Systems Post Graduate Engineer Trainee [pget] Interview Questions
