AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Spm Autocomp VMC Operator Interview Questions and Answers
Spm Autocomp VMC Operator Interview Experiences
1 interview found
Anonymous
I applied via Walk-in and was interviewed before Aug 2020. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. How far are you studying, have you worked automobile
- Ans. We have studied B.Com MBA,we have automobile worked
- Q2. What is your name
- Q3. You are live
- Q4. Which company have you worked in before?
- Ans. Previously we worked with Force Motors, Eicher Motors
Interview Preparation Tips
Interview questions from similar companies
Ravi Sagar
I applied via Recruitment Consultant and was interviewed in Nov 2018. There were 3 interview rounds.
Interview Questionnaire
3 Questions
- Q1. Basic introduction questions were putted from HR side were as the first technical round was easy were question related to your daily work management and key responsibilities were asked.
- Q2. Being a production engineer some basic questions related to manufacturing standards were asked.
- Q3. Question related to Job description and KRA were asked
Interview Preparation Tips
Skills: Technical Skill, Communication And Confidence, Body Language, Problem Solving, Decision Making Skills
Duration: <1 week
I applied via Recruitment Consultant and was interviewed before Dec 2018. There were 3 interview rounds.
Interview Questionnaire
11 Questions
- Q1. Phase in APQP, when submit PPAP
- Ans.
PPAP submission is the final phase of APQP.
PPAP submission is the final step in the APQP process.
It involves submitting a Production Part Approval Process (PPAP) to the customer.
PPAP includes documentation and samples that demonstrate the product meets customer requirements.
PPAP submission is necessary before production can begin.
PPAP submission is a critical step in ensuring product quality and customer satisfaction.
- Q2. Five phase in APQP, PPAP is submitted in 4th phase
- Ans.
APQP consists of five phases, with PPAP being submitted in the fourth phase.
APQP stands for Advanced Product Quality Planning.
The five phases of APQP are: Planning and Program Definition, Product Design and Development, Process Design and Development, Product and Process Validation, and Launch, Feedback, Assessment, and Corrective Action.
PPAP stands for Production Part Approval Process.
PPAP is submitted in the fourth p...
- Q3. How to make PPT
- Ans.
To make a PPT, use a software like PowerPoint or Google Slides and follow a structure with clear and concise content.
Choose a template or create your own design
Add relevant and visually appealing images
Use bullet points and short sentences
Practice your presentation before presenting
Include a conclusion and call to action
- Q4. How to do process audit
- Ans.
Process audit involves reviewing and evaluating a company's procedures and policies to ensure they are effective and efficient.
Identify the process to be audited
Define the audit objectives and scope
Select the audit team and assign roles
Gather and analyze data
Identify areas for improvement
Develop and implement corrective actions
Monitor and follow up on corrective actions
Document the audit findings and recommendations
- Q5. As per control plan
- Q6. What you do when a customer complaint
- Ans.
When a customer complaint arises, I listen attentively, empathize with their concerns, investigate the issue, propose a solution, and follow up to ensure satisfaction.
Listen attentively to the customer's complaint
Empathize with their concerns and show understanding
Investigate the issue by gathering relevant information
Propose a solution or offer alternatives to address the complaint
Follow up with the customer to ensure
- Q7. First I will take entrim action as well as I inform to my team & related department via mail or by face.
- Q8. How
- Ans.
Can you please clarify the question?
I'm sorry, I don't understand what you're asking.
Could you please rephrase the question?
I need more information to answer that question.
- Q9. First I depute someone at customer line then customer store, then warehouse if any, then our FG, then WIP & store if problem related to BOP part
- Q10. How & when to develop gauge & fixture during NPD
- Ans.
Gauges and fixtures should be developed during the design phase of NPD to ensure quality and efficiency.
Identify critical dimensions and tolerances early on
Develop gauges and fixtures to measure and verify these dimensions
Test and refine gauges and fixtures throughout the design process
Ensure gauges and fixtures are compatible with manufacturing processes
Finalize gauges and fixtures before production begins
- Q11. During 2nd phase, first I identify gauge or fixture required for which station, if there is inhouse facility then fix meeting for understanding concept to toolroom if not possible to meke inhouse than cal...
Interview Preparation Tips
Clean Nails or cutted properly.
Reach at interview sight 10 to 15 minutes before scheduled time.
Eye contact.
No any hesitation.
Switch off your mobile etc
Interview Questionnaire
2 Questions
- Q1. How many types of offset in cnc
- Ans.
There are typically three types of offset in CNC: tool length, cutter radius, and workpiece origin.
Tool length offset compensates for the length of the tool.
Cutter radius offset compensates for the radius of the cutting tool.
Workpiece origin offset sets the origin point for the CNC machine to begin cutting.
Other types of offset may include fixture offsets and wear offsets.
- Q2. How to enter offset 15micron in dia less
- Ans.
To enter offset 15micron in dia less, use the G10 command and specify the offset value.
Use the G10 command to enter the offset value
Specify the offset value as 15micron in dia less
Make sure to save the offset value using the G54-G59 commands
Verify the offset value using the G54.1-G59.3 commands
(2 Questions)
- Q1. What is lean manufacturing 7qc tools What is machine efficiency how calculate, what is OEE and how can increase productivity and minimize product cost
- Ans.
Lean manufacturing is a systematic approach to minimize waste and maximize value in production processes.
Lean manufacturing aims to eliminate waste, such as overproduction, waiting time, and defects.
It focuses on continuous improvement and involves all employees in identifying and solving problems.
The 7QC tools are a set of quality control tools used in lean manufacturing, including Pareto charts, cause-and-effect diag...
- Q2. Please see above questions
Interview Preparation Tips
Imformation industries
(13 Questions)
- Q1. What is work time
- Q2. Work time 12 hours
- Q3. My favrite jobs resarch in devlopment
- Q4. Group discotion very important
- Q5. Industries devlopment is veryimportant
- Q6. Work is very hard
- Q7. Industries futur devlopment is managment important
- Q8. Time to time work is very important
- Q9. Worker education and skill important
- Q10. Night and day all time work very important
- Q11. Workr deegree important
- Q12. Industries work imformation is very important
- Q13. Industries managment and devlopment all manager discotion important
(2 Questions)
- Q1. Self introduction
- Q2. Your qualification
Selected
I appeared for an interview before Feb 2024.
(3 Questions)
- Q1. What is your perspective on Daily Routine Management (DRM)?
- Ans.
Daily Routine Management (DRM) optimizes productivity by structuring daily tasks and priorities effectively.
Establishing clear goals: Setting daily, weekly, and monthly objectives helps maintain focus.
Time blocking: Allocating specific time slots for tasks can enhance concentration and efficiency.
Prioritization: Using methods like the Eisenhower Matrix to distinguish between urgent and important tasks.
Regular reviews: ...
- Q2. How do you address new process development, and what procedures do you follow?
- Ans.
I follow a structured approach to new process development, ensuring thorough analysis, testing, and implementation.
Conduct a needs assessment to identify the problem or opportunity for improvement.
Research existing processes and technologies to gather insights and best practices.
Develop a detailed project plan outlining objectives, timelines, and resources required.
Prototype the new process and conduct pilot testing to...
- Q3. What is the process for conducting a Process Failure Mode and Effects Analysis (PFMEA)?
- Ans.
PFMEA is a systematic approach to identify and mitigate potential process failures and their effects.
1. Define the scope: Identify the process to be analyzed, such as assembly or manufacturing.
2. Assemble a team: Include cross-functional members like engineers, quality, and production staff.
3. Identify potential failure modes: List ways the process could fail, e.g., incorrect assembly.
4. Determine effects of failures: ...
Pooja Verma
Selected
I applied via Recruitment Consulltant and was interviewed in May 2023. There were 2 interview rounds.
(2 Questions)
- Q1. What is red box , 7QC tools
- Ans.
Red box is a tool used in quality control to visually display data and identify outliers. 7QC tools are a set of techniques used for quality improvement.
Red box is a visual tool used in quality control to highlight outliers in data
7QC tools refer to a set of techniques used for quality improvement, including Pareto charts, histograms, and scatter diagrams
- Q2. About Internal and external Calibration
Selected
I applied via Recruitment Consulltant and was interviewed in Mar 2023. There were 4 interview rounds.
(2 Questions)
- Q1. Personal information
- Q2. Reason to leave
(3 Questions)
- Q1. About my previous job
- Q2. Previous job KPI
- Ans.
My previous job KPI was to increase sales revenue by 20% within a year.
My KPI was to increase sales revenue by 20% within a year
I achieved this by implementing targeted marketing campaigns
I also optimized the sales process to improve efficiency
Regularly analyzed sales data to identify areas for improvement
- Q3. Targets and achievements
Interview with Plant Chairman
Interview Preparation Tips
Tell us how to improve this page.
Spm Autocomp Interviews By Designations
- Spm Autocomp Mechanical Engineer Interview Questions
- Spm Autocomp CNC Machine Operator Interview Questions
- Spm Autocomp Quality Inspector Interview Questions
- Spm Autocomp Assistant Manager Interview Questions
- Spm Autocomp Quality Engineer Interview Questions
- Spm Autocomp Electrician Interview Questions
- Spm Autocomp Junior Engineer Trainee Interview Questions
- Spm Autocomp Junior Engineer Interview Questions
- Show more
Interview Questions for Popular Designations
Interview Questions from Similar Companies
|
Quality Engineer
81
salaries
|  ₹1.2 L/yr - ₹4 L/yr |
|
Junior Engineer
54
salaries
| ₹1.9 L/yr - ₹4.2 L/yr |
|
Engineer
41
salaries
| ₹2 L/yr - ₹5.4 L/yr |
|
Graduate Engineer Trainee (Get)
40
salaries
| ₹1.2 L/yr - ₹3.6 L/yr |
|
Production Engineer
34
salaries
| ₹1.8 L/yr - ₹5 L/yr |
Ag Industries
Toyoda Gosei Minda
Ralson Tyres Limited
Global Autotech
- Home >
- Interviews >
- Spm Autocomp Interview Questions >
- Spm Autocomp VMC Operator Interview Questions
