AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
SNL Bearings Interview Questions, Process, and Tips
Top SNL Bearings Interview Questions and Answers
- Q1. Difference between four stroke engine and two stroke engineasked in Production Engineer interview
- Q2. What is bearing and their different types ?asked in Visual Inspector interview
- Q3. Diffrence between petrol and diesel engine?asked in Automobile Engineer interview
SNL Bearings Interview Experiences
7 interviews found
I applied via Walk-in and was interviewed in Jun 2022. There was 1 interview round.
(2 Questions)
- Q1. Diffrence between petrol and diesel engine?
- Ans.
Petrol engines use spark ignition while diesel engines use compression ignition.
Petrol engines have higher RPMs while diesel engines have higher torque.
Petrol engines are lighter and quieter while diesel engines are heavier and noisier.
Petrol engines have better acceleration while diesel engines have better fuel efficiency.
Petrol engines emit more CO2 while diesel engines emit more NOx and particulate matter.
Petrol eng...
- Q2. What is s.i and c.i engine?
- Ans.
S.I engine stands for Spark Ignition engine and C.I engine stands for Compression Ignition engine.
S.I engine uses spark plug to ignite the fuel-air mixture while C.I engine uses compression to ignite the fuel.
S.I engine is used in petrol/gasoline vehicles while C.I engine is used in diesel vehicles.
S.I engine has lower efficiency and higher emissions compared to C.I engine.
Examples of S.I engines are petrol engines use...
Interview Preparation Tips
Automobile Engineer Interview Questions asked at other Companies
Selected
I applied via Campus Placement and was interviewed before May 2023. There was 1 interview round.
(1 Question)
- Q1. What is the least count of a vernier caliper?
- Ans.
The least count of a vernier caliper is the smallest measurement that can be read on the scale.
The least count is typically 0.02 mm or 0.001 inches on a vernier caliper.
It is determined by the number of divisions on the main scale and the vernier scale.
For example, if the main scale has 20 divisions and the vernier scale has 10 divisions, the least count would be 0.02 mm.
Quality Assurance Analyst Interview Questions asked at other Companies
I applied via Campus Placement and was interviewed in Dec 2021. There was 1 interview round.
Interview Questionnaire
5 Questions
- Q1. How to work gear box.
- Ans.
Gearbox is a mechanical device that transmits power from an engine to the wheels.
Understand the gear ratios and their corresponding speeds
Use the clutch to engage and disengage gears
Shift gears smoothly and at the appropriate time
Maintain the gearbox regularly to ensure proper functioning
- Q2. How many types of bearings
- Ans.
There are several types of bearings used in production engineering.
Plain bearings
Rolling element bearings
Jewel bearings
Fluid bearings
Magnetic bearings
Flexure bearings
- Q3. Uses of bearings
- Ans.
Bearings are used to reduce friction between two moving parts and to support loads.
Bearings are used in machines and equipment such as motors, pumps, and turbines.
They are used to support rotating shafts and to reduce friction between moving parts.
Bearings can be classified into different types such as ball bearings, roller bearings, and plain bearings.
Ball bearings are used in applications where high speed and low fri...
- Q4. Difference between four stroke engine and two stroke engine
- Ans.
Four stroke engines have four distinct phases while two stroke engines have only two phases.
Four stroke engines have separate intake, compression, power, and exhaust strokes.
Two stroke engines combine intake and compression in one stroke, and power and exhaust in another stroke.
Four stroke engines are more fuel efficient and produce less pollution compared to two stroke engines.
Examples of four stroke engines include m...
- Q5. Difference between disel engine and petrol engine
- Ans.
Diesel engines are more fuel-efficient and have higher torque, while petrol engines have higher power output and are more responsive.
Diesel engines use compression ignition while petrol engines use spark ignition.
Diesel engines have a higher compression ratio than petrol engines.
Diesel engines are more suitable for heavy-duty vehicles while petrol engines are more suitable for light-duty vehicles.
Diesel engines produce...
Interview Preparation Tips
Production Engineer Interview Questions asked at other Companies
I applied via Naukri.com and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. About rac
- Q2. About ic
- Q3. About family
- Q4. About ambition
Interview Preparation Tips
Graduate Engineer Trainee (Get) Interview Questions asked at other Companies
SNL Bearings interview questions for popular designations
I applied via Campus Placement and was interviewed in Apr 2021. There was 1 interview round.
Interview Questionnaire
1 Question
- Q1. Tell me about our self,How can you grow a company
Interview Preparation Tips
Junior Engineer - Quality Assurance Interview Questions asked at other Companies
I applied via Referral and was interviewed before Sep 2020. There was 1 interview round.
Interview Questionnaire
5 Questions
- Q1. 1. To Introduce yourself ?
- Ans. I am chandan kumar mandal from seraikella-kharsawan district. My higher qualification is B.tech in mechanical engineering from jharkhand rai university,ranchi.I have a nuclear family. My hobby is plantation and listening song and my goal is a successful mechanical engineer.
- Q2. What is bearing and their different types ?
- Ans.
Bearings are mechanical components that reduce friction between moving parts and support axial and radial loads.
There are several types of bearings, including ball bearings, roller bearings, and plain bearings.
Ball bearings use balls to reduce friction and support radial and axial loads.
Roller bearings use cylindrical, tapered, or spherical rollers to reduce friction and support radial and axial loads.
Plain bearings, a...
- Q3. What is automobile?
- Ans.
An automobile is a motor vehicle designed for transportation on roads.
It typically has four wheels and an engine.
It is used for personal transportation, as well as commercial purposes.
Examples include cars, trucks, buses, and motorcycles.
- Q4. Function of gearbox?
- Ans.
The gearbox is a mechanical device that transmits power from an engine to the wheels.
It changes the speed and torque of the vehicle's wheels.
It allows the engine to operate at an optimal speed range.
It can be manual or automatic.
It can have multiple gears for different driving conditions.
Examples: manual transmission, automatic transmission, continuously variable transmission (CVT).
- Q5. Function of differential?
- Ans.
The differential is a device that allows wheels to rotate at different speeds while driving on a curve or turning.
It helps to distribute power between the wheels
It allows for smooth turning and prevents tire wear
It is essential for four-wheel drive and all-wheel drive vehicles
Interview Preparation Tips
Visual Inspector Interview Questions asked at other Companies
I applied via Referral and was interviewed before Jul 2020. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. When Company Established?
- Q2. What is the turn over of company?
Interview Preparation Tips
Mechanical Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.
(1 Question)
- Q1. Maintenance phylosophy
- Ans. Depends on equipment running hour, criticality, availability and standby.
Interview Preparation Tips
- Boe
- Energy manager
Shubhechya Sarkar
I appeared for an interview in Jan 2017.
Interview Questionnaire
3 Questions
- Q1. Tell us about yourself.
- Ans.
I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.
Recent graduate with a degree in Computer Science
Passionate about coding and problem-solving
Strong communication and teamwork skills
- Q2. Tell us about your involvement in sports and your activities.
- Ans.
I have been actively involved in sports since childhood, participating in various team sports and individual activities.
Played soccer for 10 years, competing at a regional level
Participated in track and field events in high school, specializing in long jump and hurdles
Currently enjoy hiking and rock climbing in my free time
- Q3. Discussion of company policies about side income and startups.
Interview Preparation Tips
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes
Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes
Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.
Senior Engineer Interview Questions & Answers
Tractors and Farm Equipment
Anonymous
posted on 3 Feb 2022
I applied via Walk-in and was interviewed before Feb 2021. There was 1 interview round.
(1 Question)
- Q1. Sourcing and Vendor development related
Interview Preparation Tips
SNL Bearings Interview FAQs
Tell us how to improve this page.
SNL Bearings Interviews By Designations
- SNL Bearings Automobile Engineer Interview Questions
- SNL Bearings Graduate Engineer Trainee (Get) Interview Questions
- SNL Bearings Production Engineer Interview Questions
- SNL Bearings Mechanical Engineer Interview Questions
- SNL Bearings Visual Inspector Interview Questions
- SNL Bearings Quality Assurance Analyst Interview Questions
- SNL Bearings Junior Engineer - Quality Assurance Interview Questions
Interview Questions for Popular Designations
SNL Bearings Interview Process
based on 5 interviews
Interview experience
Interview Questions from Similar Companies
SNL Bearings Reviews and Ratings
based on 87 reviews
Rating in categories
|
Technician
8
salaries
|  ₹1.5 L/yr - ₹3.5 L/yr |
|
Junior Engineer
7
salaries
| ₹1.5 L/yr - ₹4 L/yr |
|
Diploma Trainee Engineer
6
salaries
| ₹1.3 L/yr - ₹2.5 L/yr |
|
Executive Engineer
6
salaries
| ₹4.1 L/yr - ₹5.1 L/yr |
|
Assistant Manager
5
salaries
| ₹5.7 L/yr - ₹7.5 L/yr |
Thermax Limited
ABB
Tractors and Farm Equipment
Isgec Heavy Engineering
- Home >
- Interviews >
- SNL Bearings Interview Questions
