Skipper Production Shift Incharge Interview Questions and Answers

Q1. Technical questions about plant and DM plant and Coal Analysis and Analytics type
Add your answer
Q2. Coal report of power plant and water analysis of power plant operation
Ans. 
Coal report and water analysis are crucial for power plant operation.
• Coal report provides information on the quality and quantity of coal used in the power plant.

• Water analysis helps in monitoring the quality of water used in the power plant.

• Both reports are important for ensuring efficient and safe operation of the power plant.

• Coal report can help in identifying any issues with coal quality that may affect the perform...read more
Answered by AI
Add your answer

Q1. Boiler lightup, emergency activity, achivement,full job profile,introduction
Add your answer
Q2. Lightup processer Troubleshooting Emergency condition
Add your answer

Q1. PH booster ka code word bataiye
Ans. PH booster ka code word 3006
Answered Anonymously
Add your answer
Q2. Anti oxygen chemical ka code bataiye
Add your answer
Q3. Anti sclant ka code word bataiye
Add your answer
Q4. Boiler scale jamne ka Karan bataen
Add your answer
Q5. Boiler Patti ka temperature kitna hota hai
Add your answer
Q6. Softener charge kaise karte hain
Add your answer
Q7. Boiler ka Feed Water kitne hardness ka hota hai
Add your answer
Q8. Sapna charge karne ka Tarika bataiye
Add your answer
Q9. Boiler mein scale hogi to kaun sa chemical use karenge
Add your answer

Q1. Boiler and turbine trouble shooting Boiler opration
Add your answer
Q2. Turbine operation interlock
Add your answer

Discussion about your last experience

Q1. Salary discussion and selection procedure
Add your answer
Q2. Salary discussion and procedures
Add your answer
Q3. Reduce the process time and call back to early
Ans. 
To reduce process time and call back early, we need to analyze the current process and identify bottlenecks.
• Analyze the current process flow

• Identify bottlenecks and areas of improvement

• Implement process improvements such as automation or streamlining

• Monitor and measure the impact of changes

• Continuously review and improve the process
Answered by AI
View 1 more answer

Q1. What is the reason of Condenser Vaccum getting gradually lowering treand ?
Ans. 
Condenser vacuum gradually lowering trend may be due to air leakage, cooling water temperature increase, or decrease in cooling water flow rate.
• Air leakage in the condenser system can lead to a decrease in vacuum levels.

• Increase in cooling water temperature can reduce the efficiency of the condenser, causing vacuum levels to drop.

• Decrease in cooling water flow rate can also impact the condenser's ability to maintain pr
Answered by AI
View 1 more answer

Q1. Family background and why do you want to leave your present employer
Ans. 
I come from a family of engineers and want to explore new opportunities for growth and development.
• Family background includes engineers, inspiring me to pursue a career in engineering

• Seeking new challenges and opportunities for growth

• Looking for a more dynamic work environment

• Interested in expanding my skill set and knowledge in a different setting
Answered by AI
Add your answer
Q2. For better opportunity and change to new system of power generation like WHRB power plant.
Add your answer

Q1. Explain About yourself ?
Add your answer
Q2. About Hydro test?
Add your answer
Q3. Safety settings and which safety valve pop-up first and why?
Ans. 
Safety valves are designed to prevent overpressure in a system by releasing excess pressure. The valve that pops up first is typically the one set to the lowest pressure threshold.
• Safety valves are set at different pressure thresholds to ensure that the system does not exceed its maximum pressure capacity.

• The safety valve that pops up first is usually the one set to the lowest pressure threshold, as it will activate be...read more
Answered by AI
View 1 more answer
Q4. Cooling system and working principle of cooling tower.
Ans. 
Cooling towers are heat rejection devices that use water to remove heat from a process or system.
• Cooling towers work on the principle of evaporation, where heat is transferred from the water to the air through the process of evaporation.

• The hot water from the system is pumped to the top of the cooling tower, where it is distributed over the fill media to increase the surface area for evaporation.

• As the water evaporates...read more
Answered by AI
Add your answer
Q5. Turbine rolling SOP.
Add your answer
Q6. Emergency handling.
Add your answer
Q7. Water treatment of DM water and Drum water speciation.
Ans. 
Water treatment of DM water and Drum water speciation involves processes to remove impurities and ensure water quality.
• DM water treatment involves processes like reverse osmosis, ion exchange, and UV sterilization to remove impurities.

• Drum water speciation involves analyzing the chemical composition of water in drums to ensure it meets required standards.

• Both processes are crucial in industries like pharmaceuticals, el...read more
Answered by AI
Add your answer
Q8. MOC of superheaters coils.
Ans. 
MOC of superheater coils refers to the material of construction used for the coils in a superheater.
• Common materials of construction for superheater coils include stainless steel, carbon steel, and alloy steel.

• The choice of MOC depends on factors such as operating temperature, pressure, and corrosive environment.

• Regular inspection and maintenance of superheater coils are essential to ensure optimal performance and long
Answered by AI
Add your answer

Q1. What is the trip oil procedure
Ans. 
Trip oil procedure is a process of shutting down a machine or equipment in case of an emergency or abnormal condition.
• The procedure involves stopping the flow of oil to the machine or equipment.

• This is done to prevent damage to the machine or equipment.

• The trip oil system is usually automated and activated by sensors that detect abnormal conditions.

• The system can also be manually activated by an operator in case of an ...read more
Answered by AI
Add your answer
Q2. What is the steam drum function
Ans. 
The steam drum is a component of a boiler that stores and distributes steam.
• It is a cylindrical vessel located at the top of the boiler.

• It separates steam from water and distributes it to the rest of the boiler.

• It also serves as a reservoir for the boiler feedwater.

• It is equipped with various instruments to monitor and control the boiler's operation.
Answered by AI
Add your answer
Q3. What is the coal anlaysis
Ans. 
Coal analysis is the process of determining the composition and properties of coal.
• Coal analysis involves measuring the moisture content, ash content, volatile matter, and fixed carbon content of coal.

• It also includes determining the heating value, sulfur content, and other impurities present in the coal.

• The results of coal analysis are used to determine the suitability of coal for different applications, such as power...read more
Answered by AI
Add your answer