Upload Button Icon Add office photos

Filter interviews by

SKH Metals Tool Room Engineer Interview Questions and Answers

Updated 30 Sep 2023

SKH Metals Tool Room Engineer Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via campus placement at Nettur Technical Training Foundation (NTTF) and was interviewed in Mar 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic knowledge of non conventional machines GD&T symbols.
  • Q2. Types of GD&T symbols
  • Ans. 

    Geometric Dimensioning and Tolerancing (GD&T) symbols are used to define the geometry of parts and assemblies.

    • GD&T symbols include position, concentricity, profile, perpendicularity, parallelism, and more.

    • Examples of GD&T symbols include a square for perpendicularity, a circle with a line through it for concentricity, and a triangle for position.

    • GD&T symbols help ensure parts are manufactured and assembled correctly ac

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Skh is one of the best company for learning

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2023. There were 10 interview rounds.

Round 1 - Aptitude Test 

Very good performance

Round 2 - Technical 

(3 Questions)

  • Q1. Tool room maintenance
  • Q2. Very good performance
  • Q3. Very good performance
Round 3 - Aptitude Test 

Very good personality

Round 4 - Group Discussion 

All similarities good personality

Round 5 - Assignment 

Breakdown handle is very good

Round 6 - Coding Test 

Very good performance

Round 7 - HR 

(1 Question)

  • Q1. Hr department is very good
Round 8 - Assignment 

Assignment is very good

Round 9 - Group Discussion 

Group discussion is important for tool room engineer

Round 10 - Assignment 

Assignment is very good

Interview Preparation Tips

Interview preparation tips for other job seekers - Toolroom Engineer

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Types of tools ?
  • Ans. 

    Types of tools include hand tools, power tools, cutting tools, measuring tools, and fastening tools.

    • Hand tools: Screwdrivers, hammers, wrenches

    • Power tools: Drills, saws, sanders

    • Cutting tools: Knives, scissors, shears

    • Measuring tools: Tape measures, rulers, calipers

    • Fastening tools: Nail guns, staple guns, screws

  • Answered by AI
  • Q2. What is the thickness of the part?
  • Ans. 

    The thickness of the part is 2.5 millimeters.

    • The thickness of the part is a critical dimension that needs to be accurately measured.

    • It is important to ensure that the part meets the required thickness specifications.

    • Examples of tools used to measure thickness include calipers, micrometers, and thickness gauges.

  • Answered by AI
  • Q3. What is the use of vernier ?
  • Ans. 

    Vernier is a measuring instrument used for more precise measurements than a regular scale or ruler.

    • Vernier is used to measure small distances with high accuracy.

    • It consists of a main scale and a sliding vernier scale that allows for more precise readings.

    • Vernier calipers are a common type of vernier used in engineering and machining.

    • Vernier is commonly used in tool rooms for accurate measurements of tools and component

  • Answered by AI
  • Q4. How to do PM of mold
  • Ans. 

    PM of mold involves regular inspection, cleaning, lubrication, and replacement of parts to ensure optimal performance.

    • Inspect mold for wear and damage

    • Clean mold surfaces regularly to prevent buildup of debris

    • Lubricate moving parts to reduce friction and wear

    • Replace worn or damaged parts as needed to maintain quality of output

    • Keep detailed records of maintenance activities for future reference

  • Answered by AI
  • Q5. How to check history card?
  • Ans. 

    History card can be checked by reviewing the documented information related to a particular tool or equipment.

    • Review the history card for details on maintenance, repairs, inspections, and usage of the tool or equipment.

    • Check for dates of previous maintenance activities and any issues reported during inspections.

    • Verify that all required information is properly documented on the history card.

    • Ensure that the history card ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Types of tools ?
  • Ans. 

    Types of tools include hand tools, power tools, cutting tools, measuring tools, and fastening tools.

    • Hand tools: Screwdrivers, hammers, wrenches

    • Power tools: Drills, saws, sanders

    • Cutting tools: Knives, scissors, shears

    • Measuring tools: Tape measures, rulers, calipers

    • Fastening tools: Nail guns, staple guns, screws

  • Answered by AI
  • Q2. What is the thickness of the part?
  • Ans. 

    The thickness of the part is 2.5 millimeters.

    • The thickness of the part is a critical dimension that needs to be accurately measured.

    • It is important to ensure that the part meets the required thickness specifications.

    • Examples of tools used to measure thickness include calipers, micrometers, and thickness gauges.

  • Answered by AI
  • Q3. What is the use of vernier ?
  • Ans. 

    Vernier is a measuring instrument used for more precise measurements than a regular scale or ruler.

    • Vernier is used to measure small distances with high accuracy.

    • It consists of a main scale and a sliding vernier scale that allows for more precise readings.

    • Vernier calipers are a common type of vernier used in engineering and machining.

    • Vernier is commonly used in tool rooms for accurate measurements of tools and component

  • Answered by AI
  • Q4. How to do PM of mold
  • Ans. 

    PM of mold involves regular inspection, cleaning, lubrication, and replacement of parts to ensure optimal performance.

    • Inspect mold for wear and damage

    • Clean mold surfaces regularly to prevent buildup of debris

    • Lubricate moving parts to reduce friction and wear

    • Replace worn or damaged parts as needed to maintain quality of output

    • Keep detailed records of maintenance activities for future reference

  • Answered by AI
  • Q5. How to check history card?
  • Ans. 

    History card can be checked by reviewing the documented information related to a particular tool or equipment.

    • Review the history card for details on maintenance, repairs, inspections, and usage of the tool or equipment.

    • Check for dates of previous maintenance activities and any issues reported during inspections.

    • Verify that all required information is properly documented on the history card.

    • Ensure that the history card ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Thank you
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Mar 2024. There were 3 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Basic cutting and turning tools knowledge
  • Q2. Breakdown,pm plan,spare management
Round 2 - Technical 

(2 Questions)

  • Q1. Spare management
  • Q2. Vendor development
Round 3 - HR 

(2 Questions)

  • Q1. About salary discussion
  • Q2. About joining dates
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(5 Questions)

  • Q1. Based on department
  • Q2. Tool room department
  • Q3. What is ejector ?
  • Ans. 

    An ejector is a device used to create a vacuum by converting pressure energy into velocity energy.

    • Ejectors are commonly used in industries such as chemical, petrochemical, and power plants.

    • They work on the principle of the Venturi effect, where a high-pressure fluid is converted into a high-velocity stream through a constricted section.

    • Ejectors are used for tasks such as pumping liquids, creating a vacuum, or mixing fl...

  • Answered by AI
  • Q4. What is slider ?
  • Ans. 

    A slider is a mechanical component that moves along a linear path.

    • Slider is commonly used in machinery and equipment to provide linear motion.

    • It typically consists of a sliding block or carriage that moves along a rail or track.

    • Examples include drawer slides, camera sliders, and linear actuators.

  • Answered by AI
  • Q5. What is tool maintenance process
  • Ans. 

    Tool maintenance process involves regular inspection, cleaning, lubrication, and repair of tools to ensure they function properly and have a longer lifespan.

    • Regularly inspect tools for wear and damage

    • Clean tools after each use to prevent buildup of debris

    • Lubricate moving parts to reduce friction and wear

    • Store tools properly in a dry and secure location

    • Repair or replace damaged parts as needed

    • Keep a maintenance log to t

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Motherson Automotive Technologies and Engineering Tool Room Trainee interview:
  • Tool Room Operations
Interview preparation tips for other job seekers - None
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. Self introduction and Relocation.
  • Q2. Relocate soon to the job place.
  • Q3. Family background details

I was interviewed before Apr 2021.

Round 1 - Technical 

(1 Question)

  • Q1. Myself, ppap, NPD strategic plan,

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm and always show what you know. Never trying to be oversmart.

I applied via Walk-in and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. About drawing knowledge and dawell dialing by dail gauge
  • Q2. How to operate the machine
  • Ans. 

    To operate the machine, follow these steps:

    • Read the machine manual thoroughly

    • Ensure all safety measures are in place

    • Power on the machine and set the required parameters

    • Load the material to be worked on

    • Start the machine and monitor the process

    • Remove the finished product and repeat the process

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The tool department is to good and my seniors also. Very help full

SKH Metals Interview FAQs

How many rounds are there in SKH Metals Tool Room Engineer interview?
SKH Metals interview process usually has 6-7 rounds. The most common rounds in the SKH Metals interview process are Assignment, Resume Shortlist and Aptitude Test.
What are the top questions asked in SKH Metals Tool Room Engineer interview?

Some of the top questions asked at the SKH Metals Tool Room Engineer interview -

  1. Types of GD&T symb...read more
  2. Basic knowledge of non conventional machines GD&T symbo...read more
  3. Tool room maintena...read more

Tell us how to improve this page.

People are getting interviews through

based on 2 SKH Metals interviews
WalkIn
Campus Placement
50%
50%
Moderate Confidence
?
Moderate Confidence means the data is based on a sufficient number of responses received from the candidates
SKH Metals Tool Room Engineer Salary
based on 4 salaries
₹2 L/yr - ₹3 L/yr
29% less than the average Tool Room Engineer Salary in India
View more details
Assistant Manager
171 salaries
unlock blur

₹5.1 L/yr - ₹12 L/yr

Senior Engineer
116 salaries
unlock blur

₹4 L/yr - ₹8.6 L/yr

Junior Engineer
95 salaries
unlock blur

₹1.5 L/yr - ₹4.4 L/yr

Deputy Manager
83 salaries
unlock blur

₹6 L/yr - ₹16.2 L/yr

Senior Executive
78 salaries
unlock blur

₹3.8 L/yr - ₹7.5 L/yr

Explore more salaries
Compare SKH Metals with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Hindalco Industries

4.2
Compare

Vedanta Limited

3.9
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview