Upload Button Icon Add office photos

Filter interviews by

Clear (1)

Motherson Automotive Technologies and Engineering Tool Room Trainee Interview Questions and Answers

Updated 26 Mar 2024

Motherson Automotive Technologies and Engineering Tool Room Trainee Interview Experiences

2 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Sep 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(5 Questions)

  • Q1. Based on department
  • Q2. Tool room department
  • Q3. What is ejector ?
  • Ans. 

    An ejector is a device used to create a vacuum by converting pressure energy into velocity energy.

    • Ejectors are commonly used in industries such as chemical, petrochemical, and power plants.

    • They work on the principle of the Venturi effect, where a high-pressure fluid is converted into a high-velocity stream through a constricted section.

    • Ejectors are used for tasks such as pumping liquids, creating a vacuum, or mixing fl...

  • Answered by AI
  • Q4. What is slider ?
  • Ans. 

    A slider is a mechanical component that moves along a linear path.

    • Slider is commonly used in machinery and equipment to provide linear motion.

    • It typically consists of a sliding block or carriage that moves along a rail or track.

    • Examples include drawer slides, camera sliders, and linear actuators.

  • Answered by AI
  • Q5. What is tool maintenance process
  • Ans. 

    Tool maintenance process involves regular inspection, cleaning, lubrication, and repair of tools to ensure they function properly and have a longer lifespan.

    • Regularly inspect tools for wear and damage

    • Clean tools after each use to prevent buildup of debris

    • Lubricate moving parts to reduce friction and wear

    • Store tools properly in a dry and secure location

    • Repair or replace damaged parts as needed

    • Keep a maintenance log to t

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Motherson Automotive Technologies and Engineering Tool Room Trainee interview:
  • Tool Room Operations
Interview preparation tips for other job seekers - None
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - HR 

(3 Questions)

  • Q1. Self introduction and Relocation.
  • Q2. Relocate soon to the job place.
  • Q3. Family background details

Tool Room Trainee Interview Questions Asked at Other Companies

asked in Raychem RPG
Q1. Draw the symbols of 1st angle and 3rd angle view of engineering d ... read more
asked in Raychem RPG
Q2. What is the difference between 1st and 3rd angle projection
Q3. What is TPM/KAIZEN/5S ROBOTIC/CNC MACHINE Calibration/specificati ... read more
asked in Raychem RPG
Q4. Expalin the ptoject that you made

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. Usual questions about, introduction, background, work experience, and some technical questions about, forging, casting, dies, metals, unit conversions etc.
  • Q2. Prepare, manufacturing processes, metals and properties, specially forging, casting, gauges etc.
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2023. There was 1 interview round.

Round 1 - HR 

(2 Questions)

  • Q1. How do u manage work load
  • Ans. 

    I manage my workload by prioritizing tasks, delegating when necessary, and utilizing time management techniques.

    • Prioritize tasks based on deadlines and importance

    • Delegate tasks to team members to ensure efficiency

    • Use time management techniques such as setting goals and creating schedules

    • Regularly review and adjust workload to stay on track

    • Communicate with team members and supervisors to ensure alignment on priorities

  • Answered by AI
  • Q2. Will you take others activity while busy schedule
  • Ans. 

    Yes, I am willing to take on additional tasks to help others during busy schedules.

    • I believe in teamwork and helping each other out when needed

    • I am organized and efficient in managing my time to handle multiple tasks

    • I have experience in delegating responsibilities and coordinating with team members to ensure tasks are completed on time

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Opt this with caution
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Basic principles
  • Q2. Work experience and handles the document
  • Ans. 

    I have 5 years of work experience in managing documents and ensuring accuracy and organization.

    • Managed document filing system to ensure easy access and organization

    • Reviewed and edited documents for accuracy and completeness

    • Trained team members on document handling procedures

    • Implemented digital document management system for efficiency

    • Collaborated with other departments to streamline document processes

  • Answered by AI
  • Q3. Analyse the failure mode data
  • Ans. 

    Analyzing failure mode data involves identifying patterns and trends to improve processes and prevent future failures.

    • Identify common failure modes and their frequency

    • Look for any trends or patterns in the data

    • Determine root causes of failures

    • Develop strategies to address and prevent future failures

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Highly technical knowledge is must be required...
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Casting should be thorough

Round 2 - Case Study 

Aluminium die Casting

Interview Preparation Tips

Interview preparation tips for other job seekers - Casting prep well

I applied via Walk-in and was interviewed before Dec 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Write and explain GD&T symbols?
  • Ans. 

    GD&T symbols are used to specify the geometric requirements of a part or assembly.

    • GD&T stands for Geometric Dimensioning and Tolerancing

    • Symbols include: flatness, circularity, perpendicularity, concentricity, position, and more

    • Each symbol has a specific meaning and is used to communicate precise engineering requirements

    • GD&T is used in industries such as aerospace, automotive, and manufacturing

    • Example: A position symbol...

  • Answered by AI
  • Q2. Explain Cp, Cpk & Pp, Ppk?
  • Ans. 

    Cp, Cpk, Pp, and Ppk are statistical process control indices used to measure process capability and performance.

    • Cp and Cpk measure how well a process meets its specifications, with Cpk being more accurate for non-centered processes.

    • Pp and Ppk measure how well a process performs relative to its natural variation, with Ppk being more accurate for non-centered processes.

    • All four indices are calculated using the process me...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Related to GD&T, CNC programming knowledge, SPC, Fixture design and development, Tool design and development.

Interview Preparation Tips

Interview preparation tips for other job seekers - Willing to work extra hours and ready to compromise family members.

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

3 Questions

  • Q1. Previous company job profile.
  • Q2. Plc related questions
  • Q3. Family background
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Vmc 2d programmere 3d programmere
Round 3 - One-on-one 

(1 Question)

  • Q1. All types machineing

Interview Preparation Tips

Interview preparation tips for other job seekers - VMC programmer

I applied via Naukri.com and was interviewed in Jul 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Technical questions only CNC machine

Interview Preparation Tips

Interview preparation tips for other job seekers - Technical knowledge Improvement
Contribute & help others!
anonymous
You can choose to be anonymous

Motherson Automotive Technologies and Engineering Interview FAQs

How many rounds are there in Motherson Automotive Technologies and Engineering Tool Room Trainee interview?
Motherson Automotive Technologies and Engineering interview process usually has 1-2 rounds. The most common rounds in the Motherson Automotive Technologies and Engineering interview process are HR and Resume Shortlist.
What are the top questions asked in Motherson Automotive Technologies and Engineering Tool Room Trainee interview?

Some of the top questions asked at the Motherson Automotive Technologies and Engineering Tool Room Trainee interview -

  1. What is tool maintenance proc...read more
  2. What is ejecto...read more
  3. What is slide...read more

Recently Viewed

CAMPUS PLACEMENT

Delhi College of Engineering (DCE), Delhi

LIST OF COMPANIES

Discover companies

Find best workplace

CAMPUS PLACEMENT

Sarvajanik College of Engineering and Technology, Surat

INTERVIEWS

The Hi-tech Robotic Systemz

No Interviews

INTERVIEWS

Frauscher Sensor Technology

No Interviews

INTERVIEWS

The Hi-tech Robotic Systemz

No Interviews

INTERVIEWS

The Hi-tech Robotic Systemz

No Interviews

INTERVIEWS

Johnson Controls

No Interviews

INTERVIEWS

Travclan Technology India

No Interviews

INTERVIEWS

InMobi

5.6k top interview questions

Tell us how to improve this page.

Motherson Automotive Technologies and Engineering Tool Room Trainee Interview Process

based on 2 interviews

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Varroc Group Interview Questions
3.6
 • 174 Interviews
UNO Minda Interview Questions
4.0
 • 168 Interviews
Krishna Maruti Interview Questions
4.0
 • 92 Interviews
Delphi TVS Interview Questions
3.9
 • 83 Interviews
Hyundai Mobis Interview Questions
3.8
 • 63 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
Tata Cummins Interview Questions
4.4
 • 56 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
View all
11% less than the average Tool Room Trainee Salary in India
View more details

Motherson Automotive Technologies and Engineering Tool Room Trainee Reviews and Ratings

based on 2 reviews

5.0/5

Rating in categories

5.0

Skill development

5.0

Work-life balance

5.0

Salary

5.0

Job security

4.6

Company culture

5.0

Promotions

4.6

Work satisfaction

Explore 2 Reviews and Ratings
Engineer
305 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
279 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
262 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
240 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Trainee Technician
238 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Motherson Automotive Technologies and Engineering with

Bharat Forge

3.9
Compare

Sundaram Clayton

4.1
Compare

Rane Group

4.0
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent