Filter interviews by
I applied via Approached by Company and was interviewed before Feb 2023. There was 1 interview round.
I perform a variety of tests including diagnostic tests, troubleshooting tests, performance tests, and quality assurance tests.
Diagnostic tests to identify issues or problems
Troubleshooting tests to pinpoint the cause of malfunctions
Performance tests to evaluate the functionality of systems or equipment
Quality assurance tests to ensure products meet standards
Adhesion test is performed by applying a specific force to determine the strength of adhesion between two materials.
Prepare the surfaces to be tested by cleaning and ensuring they are dry
Apply a specific force to the surfaces, such as using a pull-off tester for coatings
Measure the force required to separate the materials to determine adhesion strength
Repeat the test multiple times for accuracy
Record and analyze the re
Raw materials for paint include pigments, binders, solvents, and additives.
Pigments: Provide color and opacity to the paint (e.g. titanium dioxide, iron oxide)
Binders: Holds the pigment particles together and adhere them to the surface (e.g. acrylic, alkyd)
Solvents: Help in the application and drying of the paint (e.g. water, mineral spirits)
Additives: Enhance properties like durability, flow, and drying time (e.g. ant
I applied via Naukri.com and was interviewed before Jan 2021. There were 3 interview rounds.
ICP OES is a technique used for chemical analysis of chromite ore.
ICP OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is a powerful analytical technique used for the determination of trace elements in a variety of matrices.
ICP OES can be used to determine the concentration of elements such as Cr, Fe, Mg, Al, and Si in chromite ore.
The technique involves the excitation of atoms in a sample usi...
ICP-OES is a technique used for elemental analysis in which a sample is vaporized and excited by a plasma to emit light.
ICP-OES stands for Inductively Coupled Plasma Optical Emission Spectroscopy.
It is used to determine the concentration of elements in a sample.
The sample is vaporized and excited by a plasma to emit light, which is then analyzed to determine the elemental composition.
ICP-OES is commonly used in environ...
Weight chemical analysis of chromite ore involves determining the percentage of various elements present in the ore.
The ore is first crushed and ground into a fine powder.
The powder is then mixed with various chemicals to dissolve the elements of interest.
The resulting solution is then analyzed using various techniques such as atomic absorption spectroscopy or inductively coupled plasma mass spectrometry.
The percentage...
I applied via Referral and was interviewed in Apr 2023. There were 5 interview rounds.
Exlent questions in aptitude test.
Posted location ,in any one location in Himachal Pradesh and North site
RTD work refers to Resistance Temperature Detector work, which involves using RTDs to measure temperature.
RTD work stands for Resistance Temperature Detector work.
RTDs are sensors that measure temperature by correlating the resistance of the RTD element with temperature.
RTDs are commonly used in industrial applications for accurate temperature measurement.
RTDs offer high accuracy, stability, and repeatability compared ...
I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.
Paint is a liquid or paste material used to add color and protection to surfaces.
Paint is made up of pigments, binders, solvents, and additives.
Different types of paint include oil-based, water-based, and latex.
Paint can be used for decorative purposes or to protect surfaces from damage.
Paint can be applied using brushes, rollers, or sprayers.
Common paint finishes include matte, satin, and gloss.
1kl is equal to 1000 liters.
1kl = 1000 liters
kl stands for kiloliter
Used to measure volume of liquids
Solvents are liquids used to dissolve or dilute other substances. Paints are made up of pigments, binders, solvents, and additives.
Solvents are used to dissolve or dilute other substances in order to create a solution.
Paints are made up of pigments, binders, solvents, and additives.
Common solvents used in paint making include mineral spirits, turpentine, and acetone.
Solvents are important in paint making because they h...
Excel is a spreadsheet software used for data analysis and management. MSDS stands for Material Safety Data Sheet.
Excel is used for organizing and analyzing data in a tabular format
It allows users to perform calculations, create charts and graphs, and automate tasks
MSDS is a document that provides information about the properties and hazards of a chemical substance
It includes information on handling, storage, and emerg...
A discrepancy report is a document that highlights differences between two sets of data and identifies the reasons for the differences.
A discrepancy report is used to identify and resolve discrepancies between two sets of data.
It is important to include the reasons for the discrepancies in the report.
Examples of discrepancies include differences in inventory counts or financial statements.
The report should be clear and...
Industrial norms include safety standards that must be maintained to ensure workplace safety.
Safety standards are guidelines set by regulatory bodies to ensure safe working conditions.
Precautions include wearing appropriate personal protective equipment, following safety procedures, and reporting any hazards.
Examples of safety standards include OSHA in the US and ISO in Europe.
Safety standards cover areas such as elect...
I am a dedicated and experienced technician with a passion for problem-solving and attention to detail.
I have a degree in Engineering and 5 years of experience in troubleshooting and repairing electronic devices.
I am skilled in using various diagnostic tools and equipment to identify and fix technical issues.
I have a proven track record of meeting deadlines and exceeding customer expectations.
I am a quick learner and a...
I have 5 years of experience working as a technician in a manufacturing company.
5 years of experience as a technician in a manufacturing company
Proficient in troubleshooting and repairing equipment
Skilled in following technical manuals and diagrams
Experience with calibration and maintenance tasks
Familiar with safety protocols and procedures
I applied via Company Website and was interviewed in Nov 2024. There was 1 interview round.
Mix design is the process of determining the proportions of ingredients in a concrete mixture to achieve the desired properties.
Mix design involves selecting the appropriate materials such as cement, aggregates, and water.
The proportions of each material are determined based on factors like strength, workability, and durability requirements.
Testing is often conducted to ensure the mix meets specifications before it is
I applied via Recruitment Consulltant and was interviewed before Mar 2022. There were 2 interview rounds.
based on 1 interview
Interview experience
Sales Manager
34
salaries
| ₹9.6 L/yr - ₹22 L/yr |
Production Supervisor
22
salaries
| ₹3.2 L/yr - ₹6 L/yr |
Assistant Sales Manager
20
salaries
| ₹6.7 L/yr - ₹18 L/yr |
Assistant Manager
15
salaries
| ₹8.2 L/yr - ₹18 L/yr |
Plant Operator
14
salaries
| ₹2.4 L/yr - ₹4.3 L/yr |
BASF
Pidilite Industries
Asian Paints
Berger Paints