Filter interviews by
I applied via Walk-in and was interviewed before Oct 2023. There were 3 interview rounds.
General reasoning questions
I am a dedicated and detail-oriented mechanical engineer with a passion for problem-solving and innovation.
Graduated with a degree in Mechanical Engineering from XYZ University
Completed internships at ABC Company and gained hands-on experience in designing and testing mechanical systems
Proficient in CAD software such as SolidWorks and AutoCAD
Strong analytical skills and ability to troubleshoot complex mechanical issues
...
Comparison ratio in a diesel engine refers to the ratio of the volume of the combustion chamber when the piston is at the bottom of its stroke to the volume when the piston is at the top of its stroke.
Comparison ratio is a key factor in determining the efficiency and performance of a diesel engine.
Higher compression ratios typically result in better fuel efficiency and power output.
Common diesel engine comparison ratio...
Piston rings are used in engines to seal the gap between the piston and cylinder wall, preventing leakage of combustion gases and oil.
Piston rings create a seal between the piston and cylinder wall to prevent leakage of combustion gases and oil
They help maintain compression within the combustion chamber
Piston rings also aid in heat transfer from the piston to the cylinder wall
They reduce friction between the piston and
P-V and T-S diagrams are used to analyze the thermodynamic processes in Otto and Diesel engines.
P-V diagram shows the pressure-volume relationship during the engine cycle.
T-S diagram shows the temperature-entropy relationship during the engine cycle.
Otto cycle is used in gasoline engines while Diesel cycle is used in diesel engines.
Both cycles consist of four processes: intake, compression, power, and exhaust.
The effic...
I applied via Walk-in and was interviewed before Mar 2023. There were 3 interview rounds.
Normal question like current affairs, gs and Engineering related questions
Top trending discussions
I was interviewed in Jan 2025.
To the job programming in a group discussion on a developed to the company
I am joined in a company because to my family problems and my responsibilities
To the solve in a family problems and i joined to the company
I am Bsc complete in a job to the Wipro company are joined
I applied via Referral and was interviewed in Nov 2024. There were 3 interview rounds.
It's better to talk with me is good
It's use of contribute that way off the share details
Accenture is a global professional services company providing strategy, consulting, digital, technology, and operations services.
Global professional services company
Offers strategy, consulting, digital, technology, and operations services
Works with clients across various industries
AutoCAD is a computer-aided design software used by engineers and architects to create 2D and 3D drawings and models.
AutoCAD is widely used in various industries such as architecture, engineering, and construction.
It allows users to create precise drawings and models with tools like lines, circles, and arcs.
Users can also add dimensions, annotations, and text to their designs.
AutoCAD supports both 2D and 3D design capa...
Contributing factors in mechanical engineering involve various elements that impact the design, development, and operation of mechanical systems.
Materials used in construction
Environmental conditions
Budget constraints
Regulatory requirements
Technological advancements
Safety considerations
Ambition is a strong desire to achieve something, often accompanied by determination and hard work.
Ambition is the driving force behind setting and achieving goals.
It involves a strong desire to succeed and willingness to put in the necessary effort.
Ambition can lead to personal growth, career advancement, and overall success.
Examples include striving for a promotion at work, starting a business, or pursuing higher edu...
CATIA is a CAD software used for designing and engineering in various industries.
CATIA is a powerful 3D modeling software used in industries like automotive, aerospace, and manufacturing.
It allows engineers to design, simulate, and analyze products before they are physically created.
CATIA can be used for creating complex surfaces, assemblies, and detailed drawings.
It is commonly used for designing cars, airplanes, and ...
I applied via Job Portal
Designed and implemented a new cooling system for a manufacturing plant.
Researched different cooling technologies and their efficiency
Collaborated with a team of engineers to design the system layout
Performed simulations to optimize the cooling system performance
Managed the installation and testing of the new system
Design methodology is a systematic approach to solving engineering problems by following a series of steps.
Design methodology involves defining the problem, researching, brainstorming solutions, selecting the best solution, prototyping, testing, and refining.
It helps ensure that the final product meets the desired requirements and functions effectively.
Examples of design methodologies include Six Sigma, Lean Manufactur
The 3,2,1 principle of GD&T is a method used to establish a datum reference frame for geometric dimensioning and tolerancing.
3 points are used to establish a datum plane, 2 points to establish a datum line, and 1 point to establish a datum point.
The 3,2,1 principle ensures that the part is securely located and oriented in a consistent manner for measurement and manufacturing processes.
Datum features are used as referen...
Materials used in Aero-Engines include titanium, nickel-based superalloys, and composites.
Titanium is used for components like compressor blades and discs due to its high strength-to-weight ratio.
Nickel-based superalloys are used for high temperature components like turbine blades.
Composites, such as carbon fiber reinforced polymers, are used for fan blades and other parts to reduce weight and improve fuel efficiency.
Concentricity is the condition where two or more features share a common center point, while run out is the amount of deviation from true circularity of an object.
Concentricity refers to the tolerance of the center point of a feature relative to another feature or axis.
Run out is the measurement of how much a part deviates from a true circular path when rotated around an axis.
Concentricity is important for ensuring pro...
posted on 18 Aug 2023
I applied via Naukri.com and was interviewed in Jul 2023. There were 3 interview rounds.
I enjoy studying Thermodynamics the most.
Thermodynamics is a branch of physics that deals with heat, work, and energy.
I find the laws of thermodynamics fascinating and enjoy applying them to real-world scenarios.
Studying Thermodynamics helps me understand how energy flows and transforms in various systems.
I particularly like learning about heat transfer and its applications in engineering.
Thermodynamics plays a crucial...
Mechanical machines are devices that use mechanical power to perform work, such as moving, lifting, cutting, or shaping materials.
Mechanical machines convert mechanical energy into useful work
They are used in various industries such as manufacturing, construction, and transportation
Examples include engines, pumps, conveyor belts, and cranes
Lathe machining is a process where a workpiece is rotated against a cutting tool to remove material and create a desired shape.
Lathe machines are used to perform various operations such as turning, facing, drilling, boring, and threading.
The workpiece is held in place by a chuck or a collet while the cutting tool is mounted on a tool post.
The cutting tool is fed into the rotating workpiece to remove material and create...
My hobbies include playing guitar, reading books, and hiking in the mountains.
Playing guitar: I have been playing guitar for 5 years and enjoy learning new songs.
Reading books: I love reading fiction and non-fiction books in my free time.
Hiking in the mountains: I find peace and tranquility in nature and enjoy exploring new trails.
Mechanical energy is the sum of potential and kinetic energy in a system due to its motion or position.
Mechanical energy can be in the form of potential energy, which is energy stored in an object due to its position or configuration.
It can also be in the form of kinetic energy, which is energy possessed by an object due to its motion.
The total mechanical energy in a system remains constant if only conservative forces ...
About tech Mahindra
I applied via Company Website and was interviewed in Nov 2022. There was 1 interview round.
I applied via Approached by company and was interviewed in Dec 2021. There were 3 interview rounds.
I applied via Company Website and was interviewed in Aug 2022. There were 2 interview rounds.
Coding and decoding, blood relation, data interpretation
based on 2 interviews
Interview experience
Assistant Engineer
7
salaries
| ₹3.1 L/yr - ₹3.3 L/yr |
Mechanical Engineer
7
salaries
| ₹5.1 L/yr - ₹6.5 L/yr |
Engineer
6
salaries
| ₹5.4 L/yr - ₹10.6 L/yr |
Quality Engineer
6
salaries
| ₹3.5 L/yr - ₹7.2 L/yr |
Senior Engineer
5
salaries
| ₹5 L/yr - ₹9.5 L/yr |
TCS
Accenture
Wipro
Cognizant