Schindler Service Engineer Interview Questions and Answers

Q1. Substation related questions
Add your answer

Q1. Salary Negotiation
Add your answer

Q1. What is the control valve and operation
Ans. 
A control valve is a device used to regulate the flow of a fluid in a system by varying the size of the flow passage.
• Control valves are commonly used in industries such as oil and gas, chemical, and power plants.

• They can be operated manually, pneumatically, electrically, or through a combination of these methods.

• The operation of a control valve involves adjusting the position of the valve plug or disc to control the fl...read more
Answered by AI
Add your answer

Q1. Salary expectations
Add your answer

Q1. What is Profibus?
Ans. 
Profibus is a widely used fieldbus communication protocol in industrial automation.
• Profibus stands for Process Field Bus.

• It is used for communication between field devices and control systems in industrial automation.

• There are two main types of Profibus: Profibus DP (Decentralized Peripherals) and Profibus PA (Process Automation).

• Profibus uses a master-slave communication model.

• It is known for its high-speed data trans...read more
Answered by AI
Add your answer
Q2. How to troubleshoot Profibus
Ans. 
Troubleshooting Profibus involves checking physical connections, network configuration, and device settings.
• Check physical connections to ensure cables are properly connected and not damaged.

• Verify network configuration settings such as baud rate, parity, and address assignments.

• Inspect device settings to ensure they match the network configuration and are functioning correctly.

• Use diagnostic tools like Profibus analyz...read more
Answered by AI
Add your answer

Q1. Tell about yourself
Add your answer
Q2. Current work experience
Add your answer

Good experience in interview

Q1. Cable Length for PA cables and their diameter.
Ans. 
The cable length for PA cables varies depending on the specific application, while the diameter is typically determined by the current carrying capacity and voltage requirements.
• Cable length for PA cables can range from a few meters to several hundred meters, depending on the distance between the PA system and the speakers.

• The diameter of PA cables is usually determined by the current carrying capacity and voltage requ...read more
Answered by AI
Add your answer
Q2. Type of smoke detectors.
Ans. 
There are two main types of smoke detectors: ionization and photoelectric.
• Ionization smoke detectors use a small amount of radioactive material to ionize the air and detect smoke particles.

• Photoelectric smoke detectors use a light beam to detect smoke particles in the air.

• Dual sensor smoke detectors combine both ionization and photoelectric technologies for more comprehensive detection.
Answered by AI
Add your answer

Q1. Salary expectations
Add your answer
Q2. Openness for work from the office
Ans. 
I am open to working from the office as needed for collaboration and team communication.
• I believe in the importance of face-to-face interactions for effective communication and teamwork

• I am flexible and willing to work from the office when required for project meetings or discussions

• I understand the benefits of being physically present in the office for certain tasks or projects
Answered by AI
Add your answer

What is relay..who it's work what is conductor tell about plc,scada,hmi

Q1. What is ur first project tell about it ..plc motor logic with 5 sec delay
Add your answer

Q1. Where are form,when u start a carrer, i like to join in this comany
Add your answer

Q1. Hazardous classification
Add your answer
Q2. Environment conditions for Panel installation
Ans. 
Environment conditions such as temperature, humidity, and cleanliness are crucial for panel installation.
• Temperature should be within specified range to prevent damage to components.

• Humidity levels should be controlled to avoid condensation and corrosion.

• Cleanliness is important to prevent dust and debris from affecting performance.

• Proper ventilation is necessary to prevent overheating.

• Avoid exposure to direct sunlight...read more
Answered by AI
Add your answer
Q3. Restricted Earth Fault -explain
Ans. 
Restricted Earth Fault is a type of fault in electrical systems where the fault current is limited to a specific section of the system.
• Occurs when a fault current flows from a phase conductor to the earth through a restricted path

• Usually detected by a relay that monitors the current imbalance between the phase and neutral conductors

• Helps in quickly identifying and isolating the fault to prevent damage to equipment and ...read more
Answered by AI
Add your answer
Q4. Differential earth fault -explain
Ans. 
Differential earth fault is a type of fault in electrical systems where the current flowing into and out of the system is not equal due to an earth fault.
• Differential earth fault protection is used to detect such faults by comparing the current entering and leaving the system.

• It is important for safety as it helps prevent damage to equipment and potential electric shocks.

• Examples of differential earth fault protection ...read more
Answered by AI
Add your answer
Q5. Transformer insulation class
Ans. 
Transformer insulation class indicates the temperature at which the insulation can operate safely.
• Transformer insulation class is denoted by a letter (e.g. A, B, F, H) which corresponds to a maximum allowable temperature rise above ambient.

• Higher insulation classes can withstand higher temperatures, providing better protection for the transformer.

• Common insulation classes include A (105°C), B (130°C), F (155°C), and H
Answered by AI
Add your answer
Q6. Scheme to detect transformer temperature
Ans. 
Implement a scheme using temperature sensors to detect transformer temperature.
• Install temperature sensors at key points on the transformer

• Set up a monitoring system to continuously track temperature readings

• Establish temperature thresholds for alerts and shutdowns

• Implement a cooling system to regulate temperature if needed
Answered by AI
Add your answer
Q7. Intelligence control system
Add your answer
Q8. Standby earth fault
Add your answer
Q9. Earthed system and unearthed system
Add your answer
Q10. Voltage Levels- As per standards
Ans. 
Voltage levels as per standards vary depending on the application and region, with common levels including 110V, 220V, and 415V.
• Voltage levels can vary depending on the application and region

• Common residential voltage levels include 110V and 220V

• Industrial voltage levels are typically higher, such as 415V

• International standards like IEC and ANSI provide guidelines for voltage levels
Answered by AI
Add your answer
Q11. Types of MCCB to explain
Ans. 
Molded Case Circuit Breakers (MCCBs) are types of circuit breakers that provide protection against overcurrents.
• Thermal-magnetic MCCB: Trips when a current overload or short circuit is detected.

• Electronic MCCB: Uses electronic components for more precise and adjustable protection.

• Compact MCCB: Smaller in size for limited space installations.

• Adjustable MCCB: Allows for manual adjustment of trip settings.

• Motor protection...read more
Answered by AI
Add your answer
Q12. Lighting Calculation- Manually
Add your answer
Q13. Factors to consider for Lighting Calculation
Ans. 
Factors to consider for lighting calculation include type of space, desired lighting levels, fixture efficiency, and lighting layout.
• Type of space (office, warehouse, retail, etc.)

• Desired lighting levels (measured in lux or foot-candles)

• Fixture efficiency (lumens per watt)

• Lighting layout (spacing and placement of fixtures)

• Natural lighting sources (windows, skylights)

• Color rendering index (CRI) for accurate color repres...read more
Answered by AI
Add your answer

Q1. Previous experience and project related technical questions.
Add your answer
Q2. Basic Electrical engineering questions from previous experience
Add your answer