Upload Button Icon Add office photos

Filter interviews by

Sanmina Sci Rework Technician Interview Questions and Answers

Updated 21 Feb 2025

Sanmina Sci Rework Technician Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed in Jan 2025.

Round 1 - Technical 

(4 Questions)

  • Q1. Self intro previous company experience
  • Q2. 1 year Experience
  • Ans. 

    Yes, I have 1 year of experience as a Rework Technician.

    • I have experience troubleshooting and repairing electronic components.

    • I am familiar with soldering techniques and equipment.

    • I have worked with various testing tools and equipment.

    • I have experience following technical diagrams and instructions.

    • I have strong attention to detail and quality control.

  • Answered by AI
  • Q3. Previous company what product
  • Ans. 

    I worked at a company that manufactured consumer electronics such as smartphones and tablets.

    • Company specialized in consumer electronics

    • Products included smartphones and tablets

  • Answered by AI
  • Q4. Previous company what position
  • Ans. 

    I was a Quality Control Inspector at XYZ Company.

    • Performed quality checks on products to ensure they met company standards

    • Identified and documented defects for rework or disposal

    • Collaborated with production team to address quality issues

    • Utilized testing equipment and tools to assess product quality

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. Self intro previous company experience
Round 3 - HR 

(1 Question)

  • Q1. Technical based general knowledge question

Interview questions from similar companies

Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(3 Questions)

  • Q1. Tatasky pcb rework
  • Ans. Pcb Hot airgun, Weller, Soldering, good rework
  • Answered Anonymously
  • Q2. Perform skilled rework on faulty PCBs, including soldering and component replacement, to rectify defects and ensure their proper functionality.
  • Q3. Utilize specialized tools and equipment for reworking surface-mount components, including BGA (Ball Grid Array) and fine-pitch components.
  • Ans. 

    To rework surface-mount components, specialized tools and equipment, such as BGA rework stations and fine-pitch soldering irons, are used.

    • BGA rework stations are used to remove and replace BGA components on circuit boards.

    • Fine-pitch soldering irons with small tips are used to solder fine-pitch components with close pin spacing.

    • Other tools like hot air rework stations, soldering tweezers, and magnifying lenses may also ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Analyze and isolate problems within the PCB circuitry and components, utilizing various testing equipment and tools.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. PLC input and outputs details?
  • Ans. 

    PLC inputs and outputs are used to communicate with sensors, actuators, and other devices in an industrial control system.

    • PLC inputs are used to receive signals from sensors or other devices.

    • PLC outputs are used to send signals to actuators or other devices.

    • Inputs and outputs are typically connected to the PLC using terminal blocks or connectors.

    • Examples of inputs include push buttons, limit switches, and temperature s...

  • Answered by AI
  • Q2. Proximity sensor type
Round 2 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. What is your notice period and what are your salary expectations?
  • Ans. 

    My notice period is 2 weeks and my salary expectations are in line with industry standards.

    • Notice period: 2 weeks

    • Salary expectations: Industry standards

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Navitasys India Instrumentation Technician interview:
  • Machine Maintenance
Interview experience
4
Good
Difficulty level
-
Process Duration
Less than 2 weeks
Result
No response

I applied via Walk-in and was interviewed in Jul 2024. There was 1 interview round.

Round 1 - Technical 

(5 Questions)

  • Q1. What is current ?
  • Ans. 

    Current is the flow of electric charge in a circuit.

    • Current is measured in Amperes (A)

    • It is the rate of flow of electric charge

    • Current flows from positive to negative terminal in a circuit

    • Examples: Direct current (DC) and Alternating current (AC)

  • Answered by AI
  • Q2. How many parameter we measure in multimeter?
  • Ans. 

    A multimeter typically measures several parameters including voltage, current, and resistance.

    • Voltage

    • Current

    • Resistance

    • Continuity

    • Diode testing

  • Answered by AI
  • Q3. What is difference between cro and functions generator?
  • Ans. 

    A CRO (Cathode Ray Oscilloscope) is used to display and analyze waveforms, while a function generator is used to generate different types of waveforms.

    • CRO is used for visualizing electrical signals in the time domain, while a function generator is used to create specific waveforms like sine, square, triangle, etc.

    • CRO provides a visual representation of the input signal's amplitude, frequency, and phase, while a functio...

  • Answered by AI
  • Q4. What is normal soldering temperature?
  • Ans. 

    Normal soldering temperature typically ranges from 300 to 400 degrees Celsius.

    • Normal soldering temperature ranges from 300 to 400 degrees Celsius

    • Different types of solder may have specific temperature requirements

    • Using a temperature-controlled soldering iron is recommended for precise soldering

    • Excessive heat can damage components and create poor solder joints

  • Answered by AI
  • Q5. Explain different between schematic and block diagram?
  • Ans. 

    Schematic diagrams show the electrical connections and functions of a specific circuit, while block diagrams show the components of a system and their connections.

    • Schematic diagrams focus on the details of individual components and their connections within a circuit.

    • Block diagrams provide an overview of the system by showing the components and their interconnections.

    • Schematic diagrams are commonly used in electronics t...

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Mar 2024. There were 2 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. What is your qualification
  • Ans. 

    I have a Bachelor's degree in Electrical Engineering and a certification in Electronics.

    • Bachelor's degree in Electrical Engineering

    • Certification in Electronics

  • Answered by AI
  • Q2. How many years experience do u have
  • Ans. 

    I have 5 years of experience working as a technician in various industries.

    • 5 years of experience as a technician

    • Worked in various industries

    • Hands-on experience with troubleshooting and maintenance

    • Familiar with different types of equipment and tools

  • Answered by AI
  • Q3. Where you from?
  • Ans. 

    I am from a small town in the Midwest called Springfield.

    • I grew up in a close-knit community surrounded by farmland.

    • The town has a population of around 10,000 people.

    • Springfield is known for its annual corn festival.

    • It is located about an hour away from the nearest big city.

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Which companions do you work
  • Ans. 

    I work with a team of dedicated and skilled technicians who are always ready to assist.

    • Collaborate with other technicians to troubleshoot and solve technical issues

    • Communicate effectively with team members to ensure smooth workflow

    • Support and assist colleagues in completing tasks efficiently

  • Answered by AI
  • Q2. What is your salary expectation
  • Ans. 

    My salary expectation is based on my experience, qualifications, and the industry standard.

    • Consider my level of experience and qualifications

    • Research industry standards for similar positions

    • Be prepared to negotiate based on benefits and perks offered

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. G Code for CNC
  • Ans. 

    G Code is a programming language used to control CNC machines for manufacturing processes.

    • G Code consists of commands that tell the machine how to move, cut, or shape the material.

    • Each command starts with the letter 'G' followed by a number.

    • For example, G00 is a rapid move command, G01 is a linear interpolation command.

    • G Code can also include parameters like feed rate, spindle speed, and tool changes.

  • Answered by AI
  • Q2. M Code for CNC
  • Ans. 

    M codes are machine codes used in CNC programming to control auxiliary functions like coolant or tool changes.

    • M codes are used to activate or deactivate specific functions on a CNC machine.

    • They are typically followed by a number to specify the exact function to be performed.

    • Examples include M06 for tool changes and M08 for coolant activation.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Basic questions of Mechanical Maintenance Dipartment
  • Q2. Basic questions of PNG and site work

Interview Preparation Tips

Interview preparation tips for other job seekers - Yourself up and stay positive
Take care of safety before doing any work
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

I applied via Referral

Round 1 - HR 

(2 Questions)

  • Q1. Self about intro
  • Q2. Work experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(5 Questions)

  • Q1. Electric general questions
  • Q2. Electric breakdown
  • Q3. DG opportunity, Substation maintenance
  • Q4. Net workingspout
  • Q5. Electric pm work
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. About previous experience
  • Q2. Tell me about ICT
  • Ans. 

    ICT stands for Information and Communication Technology. It refers to the use of technology to manage and process information.

    • ICT encompasses a wide range of technologies, including computers, software, networks, and telecommunications.

    • It plays a crucial role in various sectors, such as education, business, healthcare, and government.

    • ICT enables efficient communication, data storage and retrieval, automation, and colla...

  • Answered by AI

Sanmina Sci Interview FAQs

How many rounds are there in Sanmina Sci Rework Technician interview?
Sanmina Sci interview process usually has 3 rounds. The most common rounds in the Sanmina Sci interview process are HR and Technical.

Tell us how to improve this page.

Sanmina Sci Rework Technician Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Flex Interview Questions
4.0
 • 185 Interviews
Foxconn Interview Questions
3.9
 • 149 Interviews
Navitasys India Interview Questions
4.2
 • 101 Interviews
Wistron Interview Questions
3.9
 • 82 Interviews
TE Connectivity Interview Questions
4.1
 • 81 Interviews
Secure Meters Interview Questions
4.1
 • 65 Interviews
DBG Technology Interview Questions
3.8
 • 63 Interviews
View all
Sanmina Sci Rework Technician Salary
based on 4 salaries
₹4.2 L/yr - ₹8 L/yr
152% more than the average Rework Technician Salary in India
View more details
Engineering Assistant
148 salaries
unlock blur

₹2 L/yr - ₹5.5 L/yr

Programmer Analyst
147 salaries
unlock blur

₹3.8 L/yr - ₹7.8 L/yr

Associate Engineer
89 salaries
unlock blur

₹3 L/yr - ₹6.5 L/yr

Trainee
43 salaries
unlock blur

₹1 L/yr - ₹2.5 L/yr

Senior Programmer Analyst
43 salaries
unlock blur

₹6 L/yr - ₹14.4 L/yr

Explore more salaries
Compare Sanmina Sci with

Flex

4.0
Compare

Jabil

4.0
Compare

Celestica

3.9
Compare

Creater Technology

4.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview