i
Ryka Engineering Solutions
Filter interviews by
I applied via Referral and was interviewed before Feb 2023. There was 1 interview round.
I was interviewed before Feb 2024.
The seven quality control tools are essential for process improvement and problem-solving in engineering.
Check sheet: Used to collect and analyze data in a systematic way, such as tracking defects in a manufacturing process.
Pareto chart: Helps identify the most significant factors contributing to a problem by displaying them in descending order of frequency or impact.
Cause-and-effect diagram (Fishbone diagram): Visuali...
Autonomous maintenance is a key pillar of Total Productive Maintenance (TPM) and involves seven steps to empower operators to take care of their equipment.
Step 1: Initial Cleaning - Operators clean the equipment and surrounding area to identify abnormalities.
Step 2: Eliminate Sources of Contamination - Remove dirt, dust, and debris that can lead to breakdowns.
Step 3: General Inspection - Operators visually inspect the ...
OEE calculations involve Availability, Performance, and Quality factors to measure equipment efficiency.
Calculate Availability by dividing Operating Time by Planned Production Time.
Calculate Performance by dividing Actual Production by Maximum Possible Production.
Calculate Quality by dividing Good Units Produced by Total Units Started.
Implementing lean practices is mandatory for organizations to improve efficiency, reduce waste, and increase productivity.
Lean practices help organizations identify and eliminate waste in processes, leading to cost savings and improved efficiency.
By implementing lean practices, organizations can improve quality control and reduce defects in products or services.
Lean practices promote continuous improvement and empower ...
Downstream team members can be motivated through recognition, clear communication, opportunities for growth, and fostering a positive work environment.
Provide recognition for their hard work and achievements
Communicate clearly about goals, expectations, and feedback
Offer opportunities for growth and development, such as training or mentorship programs
Create a positive work environment through team-building activities a
Pareto analysis is a technique used to identify the most important factors contributing to a problem or situation.
Pareto analysis is based on the Pareto Principle, also known as the 80/20 rule, which states that roughly 80% of effects come from 20% of causes.
It involves identifying and prioritizing the factors that have the most significant impact on a particular outcome.
By focusing on addressing the most critical fact...
A Gemba walk is a Lean management technique where managers go to the actual workplace to observe operations and engage with employees.
Gemba walks involve observing processes, asking questions, and identifying opportunities for improvement.
Managers should focus on understanding the work being done and the challenges faced by employees.
Gemba walks help in building relationships with employees and fostering a culture of c...
Steps involved in performing safety risk assessments
Identify hazards and potential risks
Assess the likelihood and severity of each risk
Implement control measures to mitigate risks
Monitor and review the effectiveness of control measures
Document findings and recommendations
Communicate risks to relevant stakeholders
TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.
TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement.
It involves autonomous maintenance, planned maintenance, and focused improvement activities.
TPM aims to improve overall equipment effectiveness (OEE) by reducing downtime, improving quality, and ...
Water cement ratio is the ratio of the weight of water to the weight of cement used in a concrete mix.
Water cement ratio is a crucial factor in determining the strength and durability of concrete.
A lower water cement ratio results in stronger and more durable concrete.
Typical water cement ratios range from 0.4 to 0.6 for normal strength concrete.
For high strength concrete, water cement ratios can be as low as 0.25.
I applied via Referral and was interviewed in Jan 2021. There was 1 interview round.
I passed HSLC in 2015.
I passed HSLC in 2015.
I completed my HSLC in 2015.
I cleared the HSLC examination in 2015.
posted on 1 Mar 2024
I applied via Walk-in and was interviewed before Mar 2023. There were 3 interview rounds.
They have a test paper that you have to fill before meeting MD in final round
posted on 21 Jun 2024
I applied via Referral and was interviewed before Jun 2023. There was 1 interview round.
Steel is strong, durable, and flexible while cement is a binding material that hardens when mixed with water. They are used in concrete for their complementary properties.
Steel is strong and can withstand heavy loads, making it ideal for reinforcing concrete structures.
Steel is also flexible, allowing it to bend without breaking under stress.
Cement is a binding material that hardens and sets when mixed with water, prov...
Types of tests conducted on concrete include compressive strength test, slump test, and water permeability test.
Compressive strength test measures the ability of concrete to withstand loads
Slump test measures the consistency and workability of concrete
Water permeability test evaluates the durability of concrete against water penetration
posted on 17 Dec 2020
I applied via Referral and was interviewed in Jun 2020. There were 3 interview rounds.
posted on 13 Oct 2023
posted on 25 Jun 2022
I applied via Referral and was interviewed before Jun 2021. There were 2 interview rounds.
Software skills refer to the ability to use various software tools and applications effectively.
Proficiency in programming languages such as Java, Python, C++
Familiarity with software development methodologies such as Agile, Waterfall
Experience with software testing and debugging
Knowledge of database management systems like MySQL, Oracle
Ability to use software tools like Git, JIRA, Visual Studio
Understanding of web dev
posted on 19 Jun 2022
I applied via Walk-in and was interviewed before Jun 2021. There were 3 interview rounds.
Data structure is a way of organizing and storing data in a computer so that it can be accessed and used efficiently.
Data structures are used to manage large amounts of data efficiently.
They provide a way to organize data in a way that makes it easy to access and manipulate.
Examples of data structures include arrays, linked lists, stacks, queues, trees, and graphs.
Explain logic of stack
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Instrument Engineer
3
salaries
| ₹0 L/yr - ₹0 L/yr |
GAMMON INDIA
Patil Group
Millennium Engineers & Contractors
Karam Industries