Upload Button Icon Add office photos

Rico Auto Industries

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Rico Auto Industries Production Interview Questions and Answers

Updated 20 Feb 2022

Rico Auto Industries Production Interview Experiences

1 interview found

Production Interview Questions & Answers

user image Anonymous

posted on 20 Feb 2022

I applied via Campus Placement and was interviewed before Feb 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. By what gauge is hydraulic oil measured?
  • Ans. 

    Hydraulic oil is measured by its viscosity, which is determined by its grade or ISO number.

    • Hydraulic oil is measured by its viscosity, which refers to its resistance to flow.

    • The viscosity of hydraulic oil is determined by its grade or ISO number.

    • The higher the grade or ISO number, the thicker the hydraulic oil.

    • Common grades for hydraulic oil include ISO 32, ISO 46, and ISO 68.

  • Answered by AI
  • Q2. Measures in hydraulic oil bar
  • Ans. 

    Measures in hydraulic oil are typically expressed in bar.

    • Bar is a unit of pressure measurement

    • It is commonly used in hydraulic systems

    • The pressure range can vary depending on the system and application

    • Typical values range from 100 to 700 bar

    • Regular monitoring of hydraulic oil pressure is important for system maintenance

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - This is what I learned from Life Management Studies

Interview questions from similar companies

I applied via Company Website and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Why you change your job ? What do you mean by productivity?
Round 3 - HR 

(2 Questions)

  • Q1. What is your Salary expectation ?
  • Q2. What is your notice period?

Interview Preparation Tips

Interview preparation tips for other job seekers - Warking as production engineer with JBM group
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Ho no yuvaraj sir no yuvaraj sir
  • Q2. Yuvaraj sir no yuvaraj sir hoo no va paa

Interview Preparation Tips

Interview preparation tips for other job seekers - Oho yuvaraj sir hoo no yuvaraj

I applied via Referral and was interviewed before Aug 2021. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Tell me 5core tools ??
  • Ans. 

    Five core tools used in production.

    • 1. CNC machines

    • 2. 3D printers

    • 3. Assembly line robots

    • 4. Welding equipment

    • 5. Industrial sewing machines

  • Answered by AI
  • Q2. Tell me about VSM objective...
  • Ans. 

    VSM objective is to identify and eliminate waste in a process.

    • VSM stands for Value Stream Mapping

    • It is a lean manufacturing tool used to analyze and improve a process

    • The objective is to identify and eliminate waste in the process

    • Waste can be in the form of overproduction, waiting, defects, excess inventory, unnecessary motion, etc.

    • By eliminating waste, the process becomes more efficient and effective

  • Answered by AI
  • Q3. Tell me about Andon and why it is used.

Interview Preparation Tips

Interview preparation tips for other job seekers - Any a away don't worry about interview . only respect to intervier ...

I applied via Approached by Company and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Assignment 

Yas

Round 2 - One-on-one 

(5 Questions)

  • Q1. I am interested work b.a
  • Q2. I am tata motors and jinni filament limited
  • Q3. I am prince pappu b.a 03year experience
  • Q4. B.a patna Lalit Narayan Mithila university
  • Q5. I am pappu Kumar thakur
  • Ans. Work interview had intended from work
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - i am interested at work from work supervisor

I applied via Referral and was interviewed in Jun 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Production line on machining work
  • Ans. 

    A production line on machining work involves the use of machines to perform various tasks in a sequential manner.

    • Machining work refers to the process of shaping or altering materials using various tools and machines.

    • A production line on machining work typically involves multiple machines arranged in a specific order to perform different operations.

    • Each machine in the production line has a specific function, such as cut...

  • Answered by AI
Round 3 - Technical 

(1 Question)

  • Q1. Production line on machining work
  • Ans. 

    Production line on machining work involves a series of processes to create a finished product.

    • The production line involves a series of machines and tools to perform different tasks.

    • Each machine or tool is responsible for a specific process, such as cutting, drilling, or shaping.

    • The production line is designed to optimize efficiency and minimize waste.

    • Quality control is an important aspect of the production line to ensu...

  • Answered by AI
Round 4 - Technical 

(1 Question)

  • Q1. Production line on machining work
  • Ans. 

    A production line for machining work involves a series of machines and processes to create a finished product.

    • The production line should be designed to optimize efficiency and minimize downtime.

    • Each machine in the line should be properly maintained and calibrated to ensure accuracy and consistency.

    • Quality control measures should be in place to catch any defects or errors in the finished product.

    • Workers should be traine...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Samvardhana Motherson Group Production interview:
  • Diploma
  • Tool&diemaker
Interview preparation tips for other job seekers - It's a good company more helpful for people's

Interview Questionnaire 

2 Questions

  • Q1. About small press machine.
  • Q2. What is fixed stroke.
  • Ans. 

    Fixed stroke refers to a consistent and unchanging distance that a mechanical component moves during each cycle.

    • Fixed stroke is a term commonly used in production and manufacturing.

    • It refers to the predetermined and unchanging distance that a mechanical component moves during each cycle.

    • This distance is fixed and does not vary.

    • For example, in a piston engine, the stroke length of the piston is fixed and determines the ...

  • Answered by AI
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Tell me about yourself
  • Ans. 

    I am a dedicated and experienced production professional with a strong background in managing manufacturing processes and optimizing efficiency.

    • Over 5 years of experience in production management

    • Skilled in implementing lean manufacturing principles

    • Proven track record of improving production output by 20% through process optimization

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Worst management

I applied via Recruitment Consultant and was interviewed in Jul 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Diff incremental and absolute encoder
  • Ans. 

    Incremental encoder measures relative position changes while absolute encoder measures absolute position.

    • Incremental encoder generates a series of pulses as the shaft rotates, which are used to determine the relative position change.

    • Absolute encoder generates a unique digital code for each shaft position, providing absolute position information.

    • Incremental encoder is simpler and less expensive, while absolute encoder i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Do the basis of the CNC machine.

I applied via Walk-in and was interviewed before Feb 2020. There was 1 interview round.

Interview Questionnaire 

6 Questions

  • Q1. Where do u live?
  • Q2. Now where are u saty
  • Q3. Asked the ohm's low
  • Q4. Explain 3ph induction motor working
  • Ans. 

    3ph induction motor works on the principle of electromagnetic induction to convert electrical energy into mechanical energy.

    • Three-phase AC power is supplied to the stator winding, creating a rotating magnetic field.

    • This rotating magnetic field induces a current in the rotor, which in turn creates its own magnetic field.

    • The interaction between the stator and rotor magnetic fields causes the rotor to rotate, converting e

  • Answered by AI
  • Q5. Drow star delta connection
  • Q6. 1 HP is equal how many watt
  • Ans. 

    1 HP is equal to 746 watts.

    • HP stands for horsepower, a unit of power used in the automotive and manufacturing industries.

    • Watt is the SI unit of power.

    • The conversion factor between HP and watt is 746.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give any ans in full of confidence.
Don't be silence say samthing of every question.
Contribute & help others!
anonymous
You can choose to be anonymous

Rico Auto Industries Interview FAQs

How many rounds are there in Rico Auto Industries Production interview?
Rico Auto Industries interview process usually has 1 rounds. The most common rounds in the Rico Auto Industries interview process are Technical.
How to prepare for Rico Auto Industries Production interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Rico Auto Industries. The most common topics and skills that interviewers at Rico Auto Industries expect are Mechanical Engineering, CNC Turning, Communication Skills, Production and Automobile Engineering.
What are the top questions asked in Rico Auto Industries Production interview?

Some of the top questions asked at the Rico Auto Industries Production interview -

  1. By what gauge is hydraulic oil measur...read more
  2. Measures in hydraulic oil ...read more

Recently Viewed

INTERVIEWS

Rico Auto Industries

No Interviews

INTERVIEWS

Rico Auto Industries

No Interviews

JOBS

Meera Financial Services

No Jobs

JOBS

Midas Fintech Solutions

No Jobs

INTERVIEWS

Bajaj Capital

No Interviews

INTERVIEWS

Bajaj Capital

No Interviews

INTERVIEWS

Bajaj Capital

No Interviews

SALARIES

HCLTech

SALARIES

YES SECURITIES

SALARIES

Nomura Holdings

Tell us how to improve this page.

Assistant Manager
294 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Associate Engineer
220 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
209 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Supervisor
72 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Rico Auto Industries with

UNO Minda

4.0
Compare

Bharat Forge

3.9
Compare

TVS Sundram Fasteners

3.7
Compare

Samvardhana Motherson Group

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview