40+ Aka Logistics Interview Questions and Answers

Gpon technology uses a specific frequency for data transmission.

• Gpon technology uses a downstream frequency of 1490 nm and an upstream frequency of 1310 nm.

• This frequency is used because it allows for high-speed data transmission over long distances.

• The downstream frequency is used for data transmission from the service provider to the customer, while the upstream frequency is used for data transmission from the customer to the service provider.

• The use of these specific freq...read more

Answers to interview questions for Tower Engineer position.

• 1) Curing is the process of maintaining moisture and temperature conditions in concrete for hydration to occur.

• 2) Development length refers to the length of reinforcement required to transfer stress from one concrete element to another, while lapping is the overlapping of reinforcement bars to ensure continuity.

• 3) M25 is a designation for a concrete mix with a characteristic compressive strength of 25 megapascals (MPa...read more

Single mode is preferred for its higher bandwidth and longer transmission distance.

• Single mode fibers have a smaller core diameter, allowing for higher bandwidth and longer transmission distances.

• Single mode fibers also have lower attenuation, resulting in less signal loss over long distances.

• Single mode fibers are commonly used in long-haul telecommunications and data center applications.

• Multimode fibers, on the other hand, have a larger core diameter and are better suited f...read more

Customer care is the provision of assistance and support to customers before, during, and after a purchase.

• Customer care involves addressing customer concerns and needs

• It includes providing information about products or services

• Customer care can be provided through various channels such as phone, email, or chat

• Customer care is important for building customer loyalty and retention

• Customer care can also involve handling complaints and resolving issues to ensure customer satisfa...read more

To convince a customer to trust you, demonstrate your expertise, provide social proof, establish rapport, and offer guarantees.

• Show your expertise by providing accurate and detailed information about the product or service.

• Share success stories and testimonials from satisfied customers to provide social proof.

• Build rapport by actively listening to the customer, understanding their needs, and offering personalized solutions.

• Offer guarantees or warranties to assure the customer...read more

OTDR uses wavelengths of 1310 nm and 1550 nm to find fiber cut and fiber losses.

• OTDR (Optical Time Domain Reflectometer) is used to locate fiber cuts and measure fiber losses.

• OTDR sends a pulse of light into the fiber and measures the time and intensity of the reflected signal.

• 1310 nm wavelength is used for shorter distances and 1550 nm for longer distances.

• Fiber losses can also be measured using a light source and power meter.

• Light source emits a known amount of light and po...read more

SINR stands for Signal-to-Interference-plus-Noise Ratio. It measures the quality of a wireless communication signal.

• SINR is calculated by measuring the strength of the desired signal, interference, and noise in a communication channel.

• A higher SINR value indicates better signal quality and less interference.

• A good SINR value is typically above 20 dB, while a bad value is below 10 dB.

• SINR is important in determining the data rate and reliability of a wireless connection.

GPON is a fiber optic communication technology that uses passive splitters to allow a single optical fiber to serve multiple premises.

• GPON stands for Gigabit Passive Optical Network

• It is a point-to-multipoint access network

• It uses optical splitters to divide a single fiber optic cable into multiple connections

• It provides high-speed internet, TV, and telephone services

• It is widely used in residential and business areas

• GPON is a cost-effective solution for delivering high-bandw...read more

The body language when talking to a shopkeeper should be friendly, confident, and attentive.

• Maintain eye contact to show interest and attentiveness.

• Smile and use open and welcoming gestures to create a friendly atmosphere.

• Stand or sit up straight to convey confidence and professionalism.

• Use appropriate facial expressions and nod to show understanding and agreement.

• Avoid crossing arms or displaying defensive body language.

• Mirror the shopkeeper's body language to establish rapp...read more

Single mode fiber has a smaller core diameter and allows for higher bandwidth and longer distances than multimode fiber.

• Single mode fiber has a core diameter of 9 microns, while multimode fiber has a core diameter of 50 or 62.5 microns.

• Single mode fiber allows for higher bandwidth and longer distances due to its smaller core diameter and lack of modal dispersion.

• Multimode fiber is less expensive and easier to work with than single mode fiber.

• Single mode fiber is commonly used...read more

I have extensive experience in market feedback, team handling, and target negotiation.

• I regularly gather market feedback through customer surveys and competitor analysis.

• I have successfully managed and motivated teams of up to 10 sales representatives.

• I am skilled in negotiating targets with management and have consistently exceeded them.

Fiber is a type of carbohydrate that cannot be digested by the body.

• Fiber is found in plant-based foods such as fruits, vegetables, whole grains, and legumes.

• There are two types of fiber: soluble and insoluble.

• Soluble fiber dissolves in water and can help lower cholesterol and regulate blood sugar levels.

• Insoluble fiber does not dissolve in water and helps promote regular bowel movements.

• A high fiber diet can help prevent constipation, heart disease, and certain types of canc...read more

Reliance Jio uses the 2300 MHz band for 4G services.

• Reliance Jio primarily operates on the 2300 MHz band for 4G services.

• The 2300 MHz band is also known as the 2.3 GHz band.

• This band provides high-speed data services to Jio customers.

LTE KPI analytics refers to the process of analyzing key performance indicators of LTE networks to improve network performance.

• LTE KPI analytics involves collecting and analyzing data on various network parameters such as throughput, latency, and signal strength.

• The insights gained from LTE KPI analytics can be used to optimize network performance, troubleshoot issues, and improve customer experience.

• Examples of LTE KPIs include RSRP (Reference Signal Received Power), RSRQ (R...read more

The height of a mobile tower can vary depending on the location and purpose, but typically ranges from 50 to 200 feet.

• Mobile tower heights can vary based on factors such as location, terrain, and coverage requirements.

• In urban areas, mobile towers are usually shorter, around 50-100 feet, to blend in with the surroundings.

• In rural areas or areas with difficult terrain, mobile towers can be taller, up to 200 feet or more, to ensure better coverage.

• Some mobile towers, especially...read more

A 5G tower is a tall structure typically made of metal with multiple antennas and equipment mounted on top.

• Tall structure made of metal

• Multiple antennas and equipment mounted on top

• May have a sleek and modern design

• Can vary in size and shape depending on location

I can handle chemist retail counter by providing excellent customer service and product knowledge.

• Greet customers warmly and ask how you can assist them

• Listen actively to their needs and provide appropriate recommendations

• Be knowledgeable about the products and their uses

• Handle transactions accurately and efficiently

• Resolve any customer complaints or issues promptly and professionally

Jio Fiber is a high-speed broadband service offered by Reliance Jio Infocomm Limited in India.

• Jio Fiber provides internet speeds up to 1 Gbps.

• It offers a range of plans with different data limits and prices.

• Jio Fiber also includes a landline phone service and access to Jio's suite of digital services.

• It uses fiber optic technology to deliver fast and reliable internet connectivity.

• Jio Fiber has been expanding its coverage across various cities in India.

48V is better than 24V due to higher power efficiency, reduced losses, and improved performance.

• Higher voltage allows for lower current, reducing power losses in transmission lines

• 48V systems are more efficient for power delivery over longer distances

• 48V systems can support higher power loads without significant voltage drop

• 48V is commonly used in data centers for improved performance and energy savings

DC is used in telecom for its ability to provide constant voltage and current, making it ideal for powering long-distance transmission lines and electronic devices.

• DC power is more efficient for long-distance transmission lines compared to AC power.

• DC power supplies a constant voltage and current, which is essential for powering electronic devices in telecom systems.

• DC power is used in telecom towers, data centers, and mobile networks to ensure reliable and stable operation.

• E...read more

Handling variation of customers requires adaptability, empathy, and effective communication.

• Listen actively to understand each customer's unique needs and preferences.

• Adapt your approach and communication style to match the customer's personality and preferences.

• Show empathy and understanding towards customers' concerns or complaints.

• Provide personalized recommendations and solutions based on individual customer requirements.

• Maintain a positive and professional attitude, rega...read more

I would highlight the unique features and benefits of the new products and demonstrate their value to potential customers.

• Identify the target audience and tailor the sales pitch accordingly

• Highlight the unique features and benefits of the new products

• Provide demonstrations or trials to showcase the value of the products

• Offer competitive pricing or promotions to incentivize purchases

• Leverage social media and other marketing channels to increase visibility

I expect a competitive CTC that aligns with my skills, experience, and the responsibilities of the Sales Officer role.

• I am looking for a CTC that reflects the market standards for a Sales Officer position.

• Considering my experience and track record in sales, I anticipate a fair compensation package.

• I am open to discussing the specific details of the CTC during the negotiation process.

• I believe that a mutually beneficial agreement can be reached based on my qualifications and t...read more

The process in a lab involves conducting experiments, analyzing samples, recording data, and maintaining equipment.

• Conducting experiments to test hypotheses

• Analyzing samples using various techniques

• Recording data accurately for analysis and reporting

• Maintaining lab equipment and ensuring proper calibration

• Following safety protocols to prevent accidents

The margin percentage of grocery products varies depending on the product category and brand.

• Margin percentage is the difference between the selling price and the cost price, expressed as a percentage of the cost price.

• Grocery products can have different margin percentages based on factors such as brand popularity, product category, and competition.

• For example, the margin percentage for a popular brand of cereal may be higher than that of a lesser-known brand.

• Similarly, the m...read more

Interference is the disruption of a signal caused by other signals or environmental factors.

• Interference can be caused by electromagnetic interference (EMI) from nearby electronic devices.

• Physical obstructions like buildings or trees can also cause interference.

• Interference can result in poor signal quality or loss of signal altogether.

48V is generally better than 12V for certain applications due to higher power capacity and efficiency.

• 48V systems can handle higher power loads more efficiently than 12V systems.

• 48V systems are commonly used in data centers, telecom equipment, and electric vehicles for their higher power capacity.

• 12V systems are still widely used in automotive applications due to compatibility with existing infrastructure.

• Overall, the choice between 48V and 12V depends on the specific require...read more

I have extensive experience in using various project management software such as Microsoft Project, Asana, and Trello.

• Proficient in Microsoft Project for creating and managing project schedules

• Experienced in using Asana for task management and team collaboration

• Skilled in Trello for visualizing project progress and tracking tasks

• Familiar with Jira for agile project management

• Adept in using Smartsheet for project tracking and resource management

The main specs of a mobile phone include the operating system, processor, RAM, storage capacity, display size and resolution, camera quality, battery life, and connectivity options.

• Operating system: Android, iOS, Windows

• Processor: Qualcomm Snapdragon, Apple A14 Bionic

• RAM: 4GB, 8GB, 12GB

• Storage capacity: 64GB, 128GB, 256GB

• Display size and resolution: 6.5 inches, 1080x2340 pixels

• Camera quality: 12MP, 48MP, 64MP

• Battery life: 4000mAh, 5000mAh

• Connectivity options: Wi-Fi, Bluetooth...read more

Riser is the vertical part of a step while tread is the horizontal part on which the foot is placed.

• Riser is the height of each step while tread is the depth of each step.

• The ratio of riser to tread is regulated by building codes to ensure safety.

• For example, a typical residential staircase may have a riser height of 7 inches and a tread depth of 11 inches.

• The riser and tread dimensions can affect the ease and safety of using the stairs.

5G towers work by transmitting and receiving radio signals to provide high-speed internet and data connectivity.

• 5G towers use higher frequency radio waves to transmit data at faster speeds than previous generations of cellular networks.

• They require more towers placed closer together to provide coverage due to the shorter range of high frequency waves.

• The towers are connected to a core network which routes data to and from the internet and other devices.

• Antennas on the towers ...read more

Sales is the process of selling products or services to customers and I joined sales to develop my communication and negotiation skills.

• Sales involves identifying potential customers, understanding their needs and preferences, and convincing them to buy the product or service

• It requires good communication and interpersonal skills, as well as the ability to negotiate and close deals

• Sales can be a challenging but rewarding career, with opportunities for growth and advancement

• I ...read more

BOQ stands for Bill of Quantities. It is a document that lists all the materials, labor, and equipment needed for a construction project.

• BOQ is used to estimate the cost of a project.

• It helps in determining the quantities of materials required for a project.

• BOQ is prepared by a quantity surveyor or an estimator.

• It includes details such as item description, quantity, unit of measurement, and cost.

• BOQ is an important document for tendering and procurement processes.

TIR stands for Total Internal Reflection. It is a phenomenon where light is reflected back into a medium instead of being refracted out of it.

• TIR occurs when light travels from a medium with a higher refractive index to a medium with a lower refractive index at an angle greater than the critical angle.

• It is used in fiber optics to keep the light signal within the core of the fiber and prevent loss of signal.

• TIR is also used in prisms and lenses to redirect light.

• The critical ...read more

The question is comparing ILL (Integrated Local Loop) and Broadband technologies.

• ILL refers to a telecommunications service that provides both voice and data transmission over a single copper wire.

• Broadband refers to a high-speed internet connection that can transmit large amounts of data simultaneously.

• ILL is typically used in areas where broadband infrastructure is limited or unavailable.

• Broadband offers faster speeds and greater bandwidth compared to ILL.

• Examples of broadb...read more

Prepaid vs Postpaid

• Prepaid plans require payment in advance, while postpaid plans require payment after usage

• Prepaid plans offer more control over spending and no credit checks

• Postpaid plans often include additional benefits like device financing and international roaming

• Prepaid plans are suitable for those with limited budgets or who want to avoid long-term commitments

• Postpaid plans are ideal for heavy data users or frequent travelers

Repairing network issues involves troubleshooting, identifying root causes, and implementing solutions.

• Identify the specific network issue reported by the user

• Use network diagnostic tools to pinpoint the root cause

• Implement solutions such as resetting network settings or replacing faulty hardware

• Test the network connection to ensure the issue has been resolved

OTDR and LSPM are tools used for testing optical fibers. Types of fiber include single-mode and multi-mode.

• OTDR (Optical Time Domain Reflectometer) is used to test the integrity of optical fibers by sending pulses of light and measuring reflections.

• LSPM (Light Source Power Meter) is used to measure the power loss in optical fibers.

• Types of fiber include single-mode fiber, which is used for long-distance communication, and multi-mode fiber, which is used for shorter distances....read more

There are multiple touch points in-store depending on the type of store and its layout.

• The number of touch points varies depending on the store's size and layout.

• Common touch points include entrance, product displays, checkout counters, and customer service desks.

• Some stores may have additional touch points such as self-checkout machines, interactive displays, or product demonstration areas.

• The goal is to ensure that customers have a positive experience at every touch point a...read more

I have 5 years of sales experience in various industries.

• I started my sales career in the pharmaceutical industry where I worked for 2 years.

• After that, I moved to the FMCG sector and worked for 3 years.

• During my tenure, I have consistently exceeded my sales targets and have won several awards.

• I have experience in both B2B and B2C sales and have worked with clients from diverse backgrounds.

RSRP actual value is the Received Signal Reference Power, a measurement used in wireless communication to determine signal strength.

• RSRP is measured in dBm (decibels per milliwatt)

• It is used in LTE networks to determine the quality of the signal received by a device

• A higher RSRP value indicates a stronger signal strength, while a lower value indicates a weaker signal

• RSRP values typically range from -140 dBm to -44 dBm

MPLS (Multiprotocol Label Switching) is a protocol used in telecommunications networks to efficiently route data packets.

• MPLS is a technique for speeding up and shaping network traffic.

• It operates at the layer 2.5 of the OSI model, between traditional layer 2 (Data Link Layer) and layer 3 (Network Layer).

• MPLS uses labels to identify and forward packets, allowing for faster and more efficient routing.

• It enables the creation of virtual private networks (VPNs) and traffic engine...read more

GPON (Gigabit Passive Optical Network) is a fiber optic technology that enables high-speed data transmission over long distances.

• GPON is a point-to-multipoint network architecture.

• It uses passive optical splitters to divide the optical signal to multiple users.

• GPON supports downstream and upstream data transmission.

• It provides high bandwidth and is capable of delivering services like internet, voice, and video.

• GPON is widely used in telecommunications networks to provide fibe...read more

A motivational speech in Hindi can inspire and uplift individuals to achieve their goals and overcome challenges.

• Start by addressing the audience and connecting with them emotionally

• Share personal anecdotes or stories of success to inspire and motivate

• Encourage the audience to believe in themselves and their abilities

• Use powerful and uplifting language to instill confidence and determination

• End with a call to action, urging the audience to take steps towards their goals

I'm sorry, but I need more context to understand the question. Exceptions in what context?

• Please provide more information about the context of the question.

• Are you referring to exceptions in a specific project or task?

• Without more information, I cannot provide a meaningful answer.

This pen is not just a writing tool, it's a statement of style and sophistication.

• This pen is made with high-quality materials that ensure a smooth writing experience.

• It's sleek and stylish design makes it a perfect accessory for any professional setting.

• The pen's ink is long-lasting and won't smudge or smear, ensuring your writing always looks neat and tidy.

• It's a great gift for anyone who values quality and style in their writing instruments.

• This pen is a must-have for anyo...read more

WFM benefits include improved efficiency, cost savings, and better customer service.

• WFM helps to optimize staffing levels and reduce labor costs

• It allows for better forecasting and scheduling of customer service representatives

• WFM can improve customer satisfaction by reducing wait times and improving service quality