Upload Button Icon Add office photos

Filter interviews by

PTD Cleantech Solutions Interview Questions, Process, and Tips

Updated 20 Oct 2024

Top PTD Cleantech Solutions Interview Questions and Answers

PTD Cleantech Solutions Interview Experiences

Popular Designations

4 interviews found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What are the components of an Air handling units. Describe the purpose of each.
  • Ans. 

    Air handling units consist of several components that work together to condition and circulate air.

    • Components include a fan, filter, heating and cooling coils, humidifier or dehumidifier, and control system.

    • The fan draws in air and circulates it through the unit.

    • The filter removes impurities from the air.

    • The heating and cooling coils regulate the temperature of the air.

    • The humidifier or dehumidifier adjusts the moistur...

  • Answered by AI
  • Q2. Design sample Clean room for the layout provided

Interview Preparation Tips

Interview preparation tips for other job seekers - Technically Sound People are preferred based on demonstration of their skills and knowledge

Project Engineer Hvac Interview Questions asked at other Companies

Q1. Why are expecting this much? We are going to pay you X/0.5 Rs/Month, is it OK to you?
View answer (2)
Interview experience
1
Bad
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Assignment 

Modelling test, AutoCAD test

Round 3 - Technical 

(1 Question)

  • Q1. Asking about HVAC design concepts

Interview Preparation Tips

Interview preparation tips for other job seekers - Company has very poor management. It doesn't matter How much skills you had you should have an ability to butter up for a growth and promotions. You are only valuable when they had a need after that you will not be entertained at all. Company don't have any concern about employees. Sometimes you will be underpaid either of your skills and talent .

Revit BIM Modeler Interview Questions asked at other Companies

Q1. How to create a level ? 2. How to create a grid ? 3. How to draw a wall?
View answer (2)
Interview experience
1
Bad
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I was interviewed before Oct 2023.

Round 1 - HR 

(2 Questions)

  • Q1. What is Back ground exp?
  • Ans. 

    Background exp refers to the previous work experience, education, and skills that a candidate has in a particular field.

    • Previous work experience in a related field

    • Educational background relevant to the position

    • Skills acquired through previous jobs or projects

    • Certifications or training programs completed

    • Projects or accomplishments that demonstrate expertise

  • Answered by AI
  • Q2. What is the family background ?
Round 2 - Technical 

(3 Questions)

  • Q1. Design spec ification s?
  • Q2. Sizing criteria basis types
  • Q3. Diff equip capacity and sizes
  • Ans. 

    Differential equipment comes in various capacities and sizes to suit different applications.

    • Differential equipment capacity is typically measured in terms of torque rating, with higher torque ratings suitable for heavier applications.

    • Sizes of differential equipment can vary based on the type of vehicle or machinery it is being used in.

    • Examples of differential equipment sizes include 7.5-inch, 8.8-inch, and 9.75-inch fo

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Dont trust the management, fake promises.
Only one customer , no hopes on future.
No systems
One man show

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (5)

BIM Engineer Interview Questions & Answers

user image Anonymous

posted on 10 Jun 2021

I applied via Naukri.com and was interviewed before Jun 2020. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. HVAC BASICS
  • Q2. REVIT BASICS

Interview Preparation Tips

Interview preparation tips for other job seekers - REVIT TOOL TEST

BIM Engineer Interview Questions asked at other Companies

Q1. What is the different type of Revit file linking process. And when we use it.
View answer (1)

PTD Cleantech Solutions interview questions for popular designations

 Revit BIM Modeler

 (1)

 BIM Engineer

 (1)

 Design Engineer

 (1)

 Project Engineer Hvac

 (1)

Jobs at PTD Cleantech Solutions

View all

Interview questions from similar companies

Interview Questionnaire 

1 Question

  • Q1. Normal question about personality and job related

Interview Preparation Tips

Round: Test
Experience: Interview was going smoothly & all questions was related my job so it's was easy for me.
Tips: Good knowledge about of wind turbine
Duration: 2 hours
Total Questions: 25

Round: HR Interview
Experience: Interview was completed so easy
Tips: Required nice personality and confidence is must required

Intern Interview Questions & Answers

Thermax Limited user image Shubhechya Sarkar

posted on 22 Aug 2017

I was interviewed in Jan 2017.

Interview Questionnaire 

3 Questions

  • Q1. Tell us about yourself.
  • Ans. 

    I am a recent graduate with a degree in Computer Science and a passion for coding and problem-solving.

    • Recent graduate with a degree in Computer Science

    • Passionate about coding and problem-solving

    • Strong communication and teamwork skills

  • Answered by AI
  • Q2. Tell us about your involvement in sports and your activities.
  • Ans. 

    I have been actively involved in sports since childhood, participating in various team sports and individual activities.

    • Played soccer for 10 years, competing at a regional level

    • Participated in track and field events in high school, specializing in long jump and hurdles

    • Currently enjoy hiking and rock climbing in my free time

  • Answered by AI
  • Q3. Discussion of company policies about side income and startups.

Interview Preparation Tips

Round: Test
Experience: It was pretty easy and generic. Not much related to my branch i.e. Chemical Engineering. Out of 24, 6 were selected for the next round.
Duration: 1 hour 30 minutes

Round: Group Discussion
Experience: 6 of us were given the choice between 2 topics: online shopping vs. Conventional shopping, and the success of swachh bharat. We selected the prior one after a discussion of 1 minute. We were given 3 minutes to brainstorm and 12 minutes to speak, so 12+3 = 15 minutes total. The mediators, that is the HR lady and the technical gentleman, just listened, did not interfere in our discussions.
Tips: Like any GD, it's crucial to demonstrate leadership without being patronising. And to dominate without being disrespectful to others. While it's ok not to take a rigid stance in a GD, it certainly gets you bonus points if you can convince the other person and "bring them to your side". It's not a debate, so even if you argue, you have to come to a more-or-less unanimous conclusion within the set time so your discussion must have a set direction. Bonus points if you're the one giving the direction.
Duration: 15 minutes

Round: HR Interview
Experience: It was for about 10-15 minutes. The HR lady and the tech gentleman were very chill. They began by asking me about myself. I have a startup of my own so I gave a short intro about myself, my immediate family, my goals and then into my startup. They had gone through my CV so they started asking about my activities in college and what I was doing. I think they were trying to figure out my character and if all of it was genuine. Then I again started talking about my startup, so they finally relented and asked me about it. I explained the idea to them and told them that I would want to continue working on my startup. They told me that it was not in accordance with their company's policy to have an employee occupied full-time in two companies. Then I informed them that my startup was my priority, and we agreed that I would not be a good fit for Thermax.
Tips: Be confident, cool and open during the interview. You are already good if you've progressed to the last stage of the selection process. The interviewer already knows you have flair. What they want to figure out is that whether you are the right fit for their company's culture. If you're not, no matter how good you are, they will not select you. And that's ok.

I applied via Campus Placement and was interviewed before Nov 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. What is a HVDC system?
  • Ans. 

    HVDC stands for High Voltage Direct Current. It is a system used for transmitting high voltage electricity over long distances.

    • HVDC systems are used to transmit electricity over long distances with minimal losses.

    • They are more efficient than traditional AC systems for long-distance transmission.

    • HVDC systems use converters to convert AC power to DC power and vice versa.

    • Examples of HVDC systems include the Itaipu HVDC sy...

  • Answered by AI
  • Q2. What is rectifier
  • Ans. 

    A rectifier is an electronic device that converts AC to DC.

    • Rectifiers are commonly used in power supplies to convert AC voltage to DC voltage.

    • They can be made using diodes or other semiconductor devices.

    • Rectifiers are essential for many electronic devices to function properly.

    • Examples of rectifiers include bridge rectifiers, half-wave rectifiers, and full-wave rectifiers.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Have patience. Its good to say no if you don't know really. Don't try to make fool

I applied via Approached by Company and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Modules tech knowledge
Round 2 - HR 

(1 Question)

  • Q1. Personal info, pay and perks

Interview Preparation Tips

Interview preparation tips for other job seekers - Have depth knowledge about the post you are applied

I applied via Walk-in and was interviewed in Aug 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Hi

Interview Preparation Tips

Topics to prepare for Thermax Limited Intern interview:
  • Java
Interview preparation tips for other job seekers - Prepare codes well
Revise oops

I applied via Referral and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Maintenance phylosophy
  • Ans. Depends on equipment running hour, criticality, availability and standby.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Thermax Limited Senior Engineer interview:
  • Boe
  • Energy manager
Interview preparation tips for other job seekers - Be confidential and technically strong.

PTD Cleantech Solutions Interview FAQs

How many rounds are there in PTD Cleantech Solutions interview?
PTD Cleantech Solutions interview process usually has 2-3 rounds. The most common rounds in the PTD Cleantech Solutions interview process are Technical, Resume Shortlist and Assignment.
How to prepare for PTD Cleantech Solutions interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at PTD Cleantech Solutions. The most common topics and skills that interviewers at PTD Cleantech Solutions expect are Construction Management, MEP, Project Management, REVIT MEP and Design Engineering.
What are the top questions asked in PTD Cleantech Solutions interview?

Some of the top questions asked at the PTD Cleantech Solutions interview -

  1. What are the components of an Air handling units. Describe the purpose of ea...read more
  2. Design sample Clean room for the layout provi...read more
  3. What is Back ground e...read more

Tell us how to improve this page.

PTD Cleantech Solutions Interview Process

based on 3 interviews

Interview experience

2.3
  
Poor
View more

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 252 Interviews
Suzlon Group Interview Questions
4.1
 • 129 Interviews
ReNew Interview Questions
4.2
 • 87 Interviews
Waaree Energies Interview Questions
3.9
 • 58 Interviews
Greenko Group Interview Questions
3.8
 • 47 Interviews
Vikram Solar Interview Questions
3.9
 • 32 Interviews
Azure Power Interview Questions
3.9
 • 20 Interviews
View all

PTD Cleantech Solutions Reviews and Ratings

based on 13 reviews

2.9/5

Rating in categories

3.1

Skill development

3.1

Work-life balance

3.2

Salary

2.6

Job security

2.8

Company culture

2.7

Promotions

2.6

Work satisfaction

Explore 13 Reviews and Ratings
Document Controller
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Project Manager
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Piping Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Safety Manager
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare PTD Cleantech Solutions with

Thermax Limited

4.1
Compare

Suzlon Group

4.1
Compare

Tata Power Solar

4.1
Compare

Waaree Energies

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview