Filter interviews by
I applied via Naukri.com and was interviewed in Oct 2022. There were 2 interview rounds.
Top trending discussions
posted on 8 Aug 2024
I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.
RTD measures temperature using resistance change, while thermocouple uses voltage change.
RTD stands for Resistance Temperature Detector, while thermocouple generates voltage based on temperature difference.
RTDs are more accurate and stable compared to thermocouples.
RTDs have higher initial cost but lower long-term maintenance cost.
Thermocouples are more rugged and can withstand higher temperatures than RTDs.
Example: RT...
PLC and DCS systems are control systems used in industrial automation to monitor and control processes.
PLC stands for Programmable Logic Controller, used for controlling machinery and processes in manufacturing.
DCS stands for Distributed Control System, used for controlling complex processes across multiple locations.
PLCs are typically used for discrete control applications, while DCS systems are used for continuous co...
AC and DC drives are types of electrical drives used to control the speed and torque of electric motors.
AC drive controls the speed of an AC motor by varying the frequency of the electrical supply.
DC drive controls the speed of a DC motor by varying the voltage supplied to the motor.
AC drives are more commonly used in industrial applications due to their efficiency and flexibility.
DC drives are often used in applicatio...
4 wire and 2 wire are configurations used in electrical circuits for measuring resistance.
4 wire configuration is used for accurate resistance measurements by eliminating lead resistance
2 wire configuration is simpler but less accurate due to lead resistance affecting measurements
Examples: 4 wire used in precision instruments like multimeters, 2 wire used in basic circuit testing
I applied via Company Website and was interviewed in Feb 2023. There were 2 interview rounds.
7 QC tools are used for quality control in manufacturing. They are simple and effective tools to identify and solve problems.
Check sheets - used to collect data and analyze it
Pareto charts - used to identify the most frequent problems
Histograms - used to show the distribution of data
Cause-and-effect diagrams - used to identify the root cause of a problem
Flowcharts - used to show the steps in a process
Control charts - u...
FMEA is a risk assessment tool used to identify and mitigate potential failures. 5S is a workplace organization method. CP and CPS are statistical process control measures.
FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identifying and mitigating potential failures in a process or product.
5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing,...
CTQ stands for Critical to Quality and CTC stands for Critical to Customer.
CTQ is a measurable characteristic of a product or process that is important to the customer.
CTC is a measurable characteristic of a product or process that directly impacts customer satisfaction.
Identifying CTQs and CTCs helps in improving the quality of the product or process.
Examples of CTQs and CTCs include product reliability, on-time deliv...
Gauges are instruments used to measure various physical quantities. There are different types of gauges for different purposes.
Pressure gauges measure pressure of fluids or gases
Temperature gauges measure temperature of substances
Thickness gauges measure thickness of materials
Wire gauges measure diameter of wires
Bore gauges measure diameter of holes
Thread gauges measure pitch and diameter of screws
Fuel gauges measure f
Instrument handling refers to the proper use, care, and maintenance of tools and equipment used in a particular field.
Properly clean and sterilize instruments before and after use
Handle instruments with care to prevent damage or contamination
Store instruments in a safe and organized manner
Regularly inspect instruments for wear and tear
Follow manufacturer's instructions for use and maintenance
Examples: surgical instrume
Yes, I am familiar with GD&T symbols.
GD&T stands for Geometric Dimensioning and Tolerancing
It is a system of symbols used to specify the dimensions and tolerances of a part
Examples of symbols include concentricity, perpendicularity, and flatness
I applied via Company Website and was interviewed in Dec 2022. There were 2 interview rounds.
5S is a methodology used to organize and maintain a clean and efficient workplace.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.
It involves organizing and labeling tools and materials, cleaning and maintaining equipment, and creating a culture of continuous improvement.
Example: A factory implementing 5S might label all tools and materials, create a designated storage area for each item, and regularl...
I applied via Company Website and was interviewed in Jul 2022. There were 3 interview rounds.
I am a Junior Engineer with a passion for problem-solving and a strong foundation in engineering principles.
I recently graduated with a degree in Mechanical Engineering.
During my studies, I gained hands-on experience through internships at engineering firms.
I have a solid understanding of CAD software and have successfully completed several design projects.
I am a quick learner and enjoy staying updated with the latest ...
I should be hired because of my strong technical skills, passion for learning, and ability to work well in a team.
I have a solid foundation in engineering principles and have excelled in my academic coursework.
I am constantly seeking opportunities to expand my knowledge and stay updated with the latest industry trends.
I am a quick learner and adapt easily to new technologies and tools.
I have experience working in colla...
My strengths include problem-solving, attention to detail, and strong technical skills.
Problem-solving: I have a strong ability to analyze complex problems and find effective solutions.
Attention to detail: I am meticulous in my work and pay close attention to every detail to ensure accuracy.
Strong technical skills: I have a solid foundation in engineering principles and am proficient in various software and tools.
Examp...
posted on 22 Nov 2022
I applied via Naukri.com and was interviewed before Nov 2021. There were 2 interview rounds.
based on 8 reviews
Rating in categories
Junior Engineer
152
salaries
| ₹1.9 L/yr - ₹4.6 L/yr |
Junior Supervisor
133
salaries
| ₹1.5 L/yr - ₹5.3 L/yr |
Engineer
63
salaries
| ₹2.3 L/yr - ₹6.5 L/yr |
Quality Engineer
44
salaries
| ₹2.1 L/yr - ₹4.5 L/yr |
Supervisor
43
salaries
| ₹2.3 L/yr - ₹5.8 L/yr |
Thermax Limited
Kirloskar Brothers
Larsen & Toubro Limited
BHEL