Filter interviews by
I appeared for an interview before Feb 2023.
Types of bearings include ball bearings, roller bearings, plain bearings, and fluid bearings.
Ball bearings: use balls to reduce friction between two surfaces
Roller bearings: use cylindrical rollers to reduce friction
Plain bearings: have a simple surface with no moving parts
Fluid bearings: use a thin layer of liquid or gas to reduce friction
Types of gears include spur, helical, bevel, worm, rack and pinion, etc.
Spur gears have straight teeth and are used for parallel shafts
Helical gears have angled teeth for smoother operation
Bevel gears are used for intersecting shafts
Worm gears have a screw-like appearance and are used for high torque applications
Rack and pinion gears convert rotational motion into linear motion
Hydraulic power pack is a device that uses hydraulic pressure to generate power for various mechanical operations.
Hydraulic power pack consists of a hydraulic pump, reservoir, valves, and hydraulic fluid.
The pump draws in fluid from the reservoir and pressurizes it to create hydraulic pressure.
Valves control the flow of hydraulic fluid to different components like cylinders or motors.
Hydraulic power packs are commonly ...
ATC alignment is done by adjusting the position of the tool center point relative to the machine's coordinate system.
Ensure the machine is properly calibrated and in good working condition.
Use a precision measuring device such as a laser tracker or a dial indicator to measure the tool center point.
Adjust the machine's axes to align the tool center point with the desired position.
Repeat the process until the alignment i...
Top trending discussions
posted on 6 Jan 2022
I applied via Naukri.com
posted on 17 Jul 2024
Boiler efficiency can be calculated by measuring the heat input and heat output of the boiler.
Calculate the heat input by measuring the fuel flow rate, fuel calorific value, and fuel consumption.
Calculate the heat output by measuring the steam flow rate and steam enthalpy.
Direct efficiency = (Heat output / Heat input) * 100%
Indirect efficiency = Direct efficiency * Boiler efficiency of other components (like economizer
The monthly maintenance cost of my section is approximately $10,000.
The monthly maintenance cost includes expenses for spare parts, labor, equipment rental, and utilities.
Regular maintenance tasks such as lubrication, inspections, and repairs contribute to the overall cost.
Cost may vary depending on the size of the section, age of equipment, and frequency of maintenance activities.
posted on 22 Aug 2017
I appeared for an interview in Apr 2017.
The hydraulic pack pressure varies depending on the specific system and application.
Hydraulic pack pressure is the force exerted by the hydraulic fluid in a hydraulic system.
It is typically measured in pounds per square inch (psi) or bar.
The pressure can vary based on the load requirements, system design, and component specifications.
Higher pressure is often required for heavy-duty applications, while lower pressure ma...
2 phase and 3 phase are different types of electrical power distribution systems.
2 phase system has two conductors and produces a single alternating current waveform.
3 phase system has three conductors and produces three alternating current waveforms.
2 phase system is less common and used in older applications.
3 phase system is more efficient and widely used in industrial and commercial settings.
2 phase system requires...
I appeared for an interview before Apr 2020.
I applied via Company Website and was interviewed before Apr 2020. There were 3 interview rounds.
I applied via Walk-in and was interviewed before May 2020. There was 1 interview round.
Preventive maintenance is a proactive approach to maintenance that involves regular inspections and repairs to prevent equipment failure.
Preventive maintenance involves scheduled inspections and repairs to prevent equipment failure
It is a proactive approach to maintenance that reduces downtime and extends equipment life
Examples include changing oil and filters, cleaning equipment, and replacing worn parts
Preventive mai...
Panel preventive maintenance is the regular inspection and servicing of electrical panels to ensure their proper functioning.
It involves checking for loose connections, damaged components, and signs of wear and tear.
Cleaning the panels and removing any debris or dust that may have accumulated.
Testing the panels to ensure they are functioning properly and addressing any issues that are found.
Examples include checking th...
I applied via Company Website and was interviewed before Jul 2021. There were 3 interview rounds.
I applied via Naukri.com and was interviewed in Apr 2020. There were 4 interview rounds.
based on 1 interview
Interview experience
based on 3 reviews
Rating in categories
Production Engineer
13
salaries
| ₹1.8 L/yr - ₹3.3 L/yr |
CNC Operator
13
salaries
| ₹1 L/yr - ₹2.2 L/yr |
CNC Machine Operator
12
salaries
| ₹1 L/yr - ₹3 L/yr |
Maintenance Engineer
12
salaries
| ₹1.7 L/yr - ₹2.5 L/yr |
Technician
9
salaries
| ₹1.4 L/yr - ₹3.3 L/yr |
Thermax Limited
Cummins
ABB
Isgec Heavy Engineering