Filter interviews by
I applied via Recruitment Consultant and was interviewed in Aug 2021. There were 7 interview rounds.
EWGB is not a known acronym or term in the field of FM BSS engineering.
EWGB is not a commonly used term in the field of FM BSS engineering
It is possible that the interviewer misspoke or meant to ask a different question
It is important to clarify any unclear or unfamiliar terms in an interview setting
fzhn is not a known acronym or abbreviation in the field of FM BSS engineering.
There is no known meaning or context for fzhn in FM BSS engineering.
It is possible that the interviewer made a mistake or was testing the candidate's ability to handle unexpected questions.
The candidate can politely ask for clarification or context if they are unsure how to answer.
MIMO stands for Multiple Input Multiple Output. It is a wireless communication technology that uses multiple antennas to improve signal quality.
MIMO uses multiple antennas at both the transmitter and receiver to improve signal quality and increase data rates.
It works by transmitting multiple data streams simultaneously over the same frequency band.
MIMO is used in many wireless communication standards, including Wi-Fi, ...
fxjb is not a known acronym or term in the field of FM BSS engineering.
There is no known definition or context for fxjb in FM BSS engineering.
It is possible that the interviewer may have misspoken or meant to ask a different question.
It is important to clarify any unclear or unfamiliar terms in an interview setting.
TSGb stands for Technical Specification Group on Base Station System and its responsible for developing standards for base station systems.
TSGb is a group within the 3rd Generation Partnership Project (3GPP)
It is responsible for developing standards for base station systems
TSGb works on topics such as radio frequency, power consumption, and network architecture
The standards developed by TSGb ensure interoperability bet...
tsdb stands for Time Series Database, used for storing and retrieving time series data.
tsdb is optimized for handling large amounts of time-stamped data
It allows for efficient querying and analysis of time series data
Examples of tsdb include InfluxDB, OpenTSDB, and Prometheus
RSSI stands for Received Signal Strength Indicator and is a measurement of the power level of a received radio signal.
RSSI is commonly used in wireless communication systems to determine the quality of the signal being received.
It is usually measured in decibels (dB) and can be used to estimate the distance between the transmitter and receiver.
A higher RSSI value indicates a stronger signal, while a lower value indicat...
SRAN stands for Single Radio Access Network, a technology used in mobile networks to combine multiple radio access technologies into a single network.
SRAN allows for seamless handover between different radio access technologies, such as 2G, 3G, and 4G.
It enables operators to optimize network resources and improve network efficiency.
SRAN is a key component of Huawei's mobile network solutions.
Examples of SRAN products i...
TDD stands for Test Driven Development. It is a software development process that relies on writing tests before writing the actual code.
TDD involves writing a failing test case first, then writing the code to pass the test.
It helps in ensuring that the code is working as expected and reduces the chances of bugs.
TDD also helps in improving the design of the code and makes it more modular and maintainable.
Functions are ...
FRGU module is responsible for generating frequency reference signals for base station equipment.
FRGU stands for Frequency Reference Generator Unit.
It generates frequency reference signals for base station equipment.
It ensures that all the equipment in the base station is synchronized to the same frequency.
FRGU module is an important component in ensuring the quality of the cellular network.
Examples of FRGU modules inc
The fxef module is responsible for handling the exchange of data between the BSS and the MSC.
The fxef module is a key component in the BSS architecture.
It is responsible for handling the exchange of data between the BSS and the MSC.
It ensures that the data is properly formatted and transmitted between the two systems.
Examples of data that may be exchanged include call setup and teardown messages, billing information, a
A combiner is a device that combines multiple signals into a single output.
Combiners are used in radio frequency (RF) systems to combine signals from multiple transmitters onto a single antenna.
They can also be used in distributed antenna systems (DAS) to combine signals from multiple antennas into a single output.
Combiners can be passive or active, and can operate at different frequencies depending on the application.
...
RRI stands for Radio Resource Index. It is a parameter used in GSM networks to measure the quality of radio resources.
RRI is used to determine the quality of radio resources in GSM networks
It is a parameter that is calculated based on the number of timeslots available and the number of active users
RRI is used to allocate radio resources efficiently and avoid congestion
A low RRI value indicates congestion and poor call ...
A metro hub is a central location where multiple metro lines intersect and passengers can transfer between them.
Metro hubs are designed to facilitate easy and efficient transfer between different metro lines.
They often have multiple levels or platforms to accommodate different lines.
Metro hubs may also have amenities such as shops, restaurants, and restrooms for passengers.
Examples of metro hubs include Grand Central T...
SDH stands for Synchronous Digital Hierarchy. It is a standard for transmitting digital signals over optical fiber networks.
SDH is used for high-speed communication in telecommunications networks.
It is a synchronous system, meaning that all devices are synchronized to a common clock signal.
SDH uses a hierarchical structure of containers and frames to transport data.
It provides error checking and correction to ensure da...
XML is a markup language used for storing and transporting data.
XML stands for eXtensible Markup Language
It uses tags to define elements and attributes to provide additional information
XML is commonly used for data exchange between different systems and applications
Examples of XML applications include RSS feeds, SOAP web services, and XHTML web pages
The number of mux used in Nokia varies depending on the specific product and network configuration.
The number of mux used in Nokia can range from a few to several hundred depending on the network size and complexity.
Different Nokia products may use different types and numbers of mux.
The number of mux used may also depend on the specific network configuration and requirements.
For example, Nokia's Wavence microwave trans...
A router is a networking device that forwards data packets between computer networks.
Routers connect multiple networks together
They use routing tables to determine the best path for data packets
Routers can be used in homes, businesses, and on the internet
Examples of routers include Cisco, Netgear, and TP-Link
Huawei equipment includes routers, switches, access points, and more for telecommunications networks.
Huawei routers are used for routing data packets between computer networks.
Huawei switches are used for connecting devices within a network.
Huawei access points are used for providing wireless network access.
Huawei also offers network security equipment such as firewalls and intrusion prevention systems.
Examples of Huaw...
NEC IP equipment includes various types of hardware used for communication and networking purposes.
NEC IP equipment includes IP phones, routers, switches, and servers.
These devices are used for voice and data communication, network management, and security.
Examples of NEC IP equipment include the UNIVERGE SV9100, SL2100, and DT800 series IP phones.
NEC IP equipment is designed to be scalable and flexible to meet the nee...
ECI MUX is a multi-service access platform used for aggregation and transport of voice, data, and video services.
ECI MUX is used in telecommunications networks to aggregate and transport multiple services over a single network infrastructure.
It supports various interfaces such as TDM, Ethernet, and ATM.
ECI MUX can be used for applications such as mobile backhaul, business services, and residential broadband.
It provides...
MCMU stands for Main Control and Monitoring Unit. It is a critical component in a BSS system.
MCMU is responsible for controlling and monitoring various subsystems in a BSS system.
It receives and processes data from different sources and provides real-time information to the operator.
MCMU also performs fault detection and isolation, and initiates corrective actions if necessary.
Examples of subsystems that MCMU controls ...
BCSU stands for Base Station Control Unit. It is responsible for controlling and managing the radio resources of a base station.
BCSU is a key component of a base station in a cellular network.
It manages the radio resources of the base station, including frequency and power allocation.
BCSU communicates with other network elements such as the MSC and BTS.
It is responsible for call setup, handover, and other network funct...
The question is unclear. Please provide more context.
Please provide more information about the card in question.
Is it a hardware card or a software card?
What is the specific function of the card?
Without more information, it is impossible to answer the question.
AS7 card is a type of interface card used in telecom equipment for connecting to the backplane.
AS7 card is used in telecom equipment for connecting to the backplane
It provides interface for various types of signals such as voice, data and control signals
AS7 card is commonly used in BSS (Base Station Subsystem) equipment for connecting to the BTS (Base Transceiver Station)
Group switch is used to control multiple devices simultaneously.
Group switch allows for easy and efficient control of multiple devices at once.
It can be used to turn on/off lights, fans, and other appliances in a room or area.
Group switch can also be used to set timers and schedules for devices.
It simplifies the process of managing multiple devices and saves time and effort.
Group switch is commonly used in smart home a
Top trending discussions
posted on 11 Oct 2020
I applied via Referral and was interviewed before Sep 2020. There were 3 interview rounds.
I applied via Referral and was interviewed before Sep 2019. There were 4 interview rounds.
posted on 13 Apr 2021
I applied via Naukri.com and was interviewed before Apr 2020. There was 1 interview round.
I applied via Naukri.com and was interviewed before Apr 2023. There was 1 interview round.
The bill of material for a 1 KM 11 KV line includes various components such as conductors, insulators, transformers, and poles.
Conductors: Copper or aluminum cables used to transmit electricity.
Insulators: Materials like porcelain or polymer used to support and isolate the conductors.
Transformers: Devices used to step up or step down the voltage.
Poles: Structures to support the conductors and maintain their position.
Ot...
The bill of material for a 1 KM AB cable line includes various components.
The cable itself
Insulators
Connectors
Poles or towers
Grounding equipment
Hardware such as bolts and clamps
Tools for installation
Safety equipment
Transportation costs
Labor costs
The bill of material for a 1KM underground line with 33KV, 11KV, and LT lines.
The bill of material should include all necessary components for the underground line.
Components may include cables, transformers, switchgear, and other electrical equipment.
The quantity of each component should be specified in the bill of material.
The bill of material should also include any necessary accessories such as clamps, connectors,
Testing and commissioning of RMU and relay setting is a crucial aspect of project engineering.
Testing and commissioning of RMU involves verifying the functionality of the switchgear and ensuring it is safe for operation.
Relay setting involves configuring the protection relays to ensure they operate correctly in the event of a fault.
Testing and commissioning should be carried out in accordance with relevant standards an...
A lightning arrestor is a device used to protect electrical equipment from lightning strikes.
It is also known as a surge arrester or lightning diverter.
It works by providing a low-impedance path for lightning current to flow to the ground.
It is commonly used in power distribution systems, telecommunication networks, and buildings.
Examples include metal oxide varistors, gas discharge tubes, and carbon block arrestors.
Discharge rods are grounding devices used to discharge static electricity from equipment or machinery.
Also known as grounding rods or earthing rods
Typically made of copper or aluminum
Used in industries such as oil and gas, chemical, and manufacturing
Prevents damage to equipment and potential safety hazards
Example: Discharge rods are commonly used in refineries to prevent explosions caused by static electricity buildup.
The size of conductors and cables is an important factor in determining their electrical properties and performance.
The size of a conductor is determined by its cross-sectional area, which affects its resistance and current-carrying capacity.
Cable size is determined by the current it needs to carry and the distance it needs to travel.
Larger conductors and cables can carry more current and have lower resistance, but may...
GTP is a protocol used in cellular communication. MQP and FQP are not commonly used acronyms.
GTP stands for GPRS Tunnelling Protocol
It is used in cellular communication to allow data transfer between different networks
MQP and FQP are not commonly used acronyms and may refer to specific organizations or products
HDD machine is a drilling machine used for horizontal directional drilling.
HDD stands for Horizontal Directional Drilling
It is used for underground drilling without disturbing the surface
It is commonly used for laying pipelines, cables, and conduits
The machine uses a drill stem and a drilling fluid to bore through the ground
It requires skilled operators and engineers to operate and plan the drilling process
Jointing of cables and conductors is a crucial aspect of project engineering.
Jointing involves connecting two or more cables or conductors to ensure continuity of electrical flow.
Various methods of jointing include crimping, soldering, and welding.
Factors such as the type of cable, voltage, and current capacity must be considered when selecting a jointing method.
Proper insulation and sealing of joints is essential to p...
Experienced project engineer with a background in civil engineering and a passion for problem-solving and team collaboration.
Bachelor's degree in Civil Engineering
5+ years of experience in project management
Proficient in AutoCAD and project management software
Strong communication and leadership skills
Successfully led a team in completing a major infrastructure project on time and within budget
I applied via Recruitment Consulltant and was interviewed in Apr 2022. There were 5 interview rounds.
General knowledge, awareness, ability test, general English,math(percent,profit,loss, population, average etc)
posted on 15 Jan 2025
I applied via Campus Placement and was interviewed before Jan 2024. There were 2 interview rounds.
It was about telecom
based on 3 reviews
Rating in categories
R&D Engineer
401
salaries
| ₹6.6 L/yr - ₹28 L/yr |
Technical Lead
387
salaries
| ₹9 L/yr - ₹33.8 L/yr |
Network Engineer
245
salaries
| ₹1.5 L/yr - ₹8.8 L/yr |
Technical Specialist
242
salaries
| ₹8.6 L/yr - ₹34 L/yr |
Fault Management Engineer
242
salaries
| ₹1.5 L/yr - ₹9.8 L/yr |
Sterlite Technologies
Indus Towers
Cisco
BT Business