Filter interviews by
I applied via Naukri.com and was interviewed in Aug 2022. There were 2 interview rounds.
TPM stands for Total Productive Maintenance and JH steps refer to Job Hazard Analysis steps.
TPM is a systematic approach to equipment maintenance that aims to maximize productivity and minimize downtime.
It involves proactive maintenance, employee involvement, and continuous improvement.
JH steps are a set of procedures used to identify and analyze potential hazards in a job or task.
They help in developing safety measure...
OEE calculation is a measure of manufacturing productivity that combines availability, performance, and quality metrics.
OEE stands for Overall Equipment Effectiveness
It is calculated by multiplying availability, performance, and quality metrics
Availability measures the percentage of time the equipment is available for production
Performance measures the speed at which the equipment is running compared to its maximum spe...
Assembly line processing in our plant involves a series of steps where each worker performs a specific task to assemble a product.
Each worker is responsible for a specific task in the assembly process
The product moves along a conveyor belt from one worker to the next
Quality control checks are performed at various stages of the process
Efficiency and productivity are key factors in assembly line processing
Examples includ...
A skills matrix is a tool used to assess and track the skills and competencies of employees within an organization.
It helps identify skill gaps and training needs
It can be used for succession planning and career development
It can aid in performance evaluations and goal setting
It can be used to ensure compliance with industry standards and regulations
Poka yoke is a mistake-proofing technique and CAPA is a corrective and preventive action process.
Poka yoke is a Japanese term that means 'mistake-proofing'. It involves designing a process or product in a way that prevents errors from occurring.
CAPA stands for Corrective and Preventive Action. It is a process used to identify and address the root cause of a problem to prevent it from happening again.
Poka yoke and CAPA ...
Kaizen is a Japanese term for continuous improvement, while suggestion refers to ideas for improvement from employees.
Kaizen involves making small, incremental improvements to processes and systems over time.
Suggestion programs encourage employees to share their ideas for improvement and provide feedback on existing processes.
Both kaizen and suggestion are important for promoting a culture of continuous improvement and...
ISO/TS and IATF audits are quality management system audits for automotive industry. Calibration gauge and parameter are important for ensuring accuracy and consistency in production.
ISO/TS and IATF audits are conducted to ensure that the quality management system of a company meets the requirements of the automotive industry.
Calibration gauge and parameter are used to ensure that the measurement equipment used in prod...
Pneumatic pressure uses compressed air while hydraulic pressure uses a liquid, usually oil.
Pneumatic pressure is typically lower than hydraulic pressure
Hydraulic pressure is more efficient for heavy-duty applications
Pneumatic pressure is cleaner and easier to maintain
Examples of pneumatic systems include air brakes on vehicles and pneumatic tools
Examples of hydraulic systems include car brakes and heavy machinery
Insufficient information provided to answer the question.
There is not enough context to determine what wsqc.wes.and swc refers to.
More information is needed to provide an accurate answer.
It is important to clarify the context of the question before attempting to answer it.
6 Sigma is a data-driven methodology used to improve business processes by reducing defects and variability.
It aims to achieve a level of quality where the probability of defects is less than 3.4 per million opportunities.
It involves five phases: Define, Measure, Analyze, Improve, and Control (DMAIC).
It uses statistical tools and techniques to identify and eliminate the root causes of defects.
It is widely used in manuf...
5S is a methodology for workplace organization and standardization. FIFO is a method of inventory management.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain
5S helps to improve efficiency, safety, and quality in the workplace
FIFO stands for First In, First Out
FIFO is used to manage inventory by ensuring that the oldest items are used or sold first
FIFO is commonly used in industries such as food and bev
KPI stands for Key Performance Indicator. It is a measurable value that demonstrates how effectively a company is achieving its key business objectives.
KPIs are used to evaluate the success of an organization or of a particular activity in which it engages.
They help to identify areas that require improvement and to set targets for improvement.
Examples of KPIs include revenue growth, customer satisfaction, employee turn...
TSV stands for Tab Separated Values and CSV stands for Comma Separated Values.
TSV and CSV are file formats used to store and exchange data.
TSV separates values using tabs while CSV separates values using commas.
Both formats are commonly used in spreadsheets and databases.
TSV is preferred when data contains commas while CSV is preferred when data contains tabs.
He describe me my resume.my self etc
I learn in HR recruiting through on-the-job training, workshops, online courses, and mentorship.
On-the-job training: Learning by performing tasks under supervision
Workshops: Attending training sessions to enhance skills and knowledge
Online courses: Taking courses related to HR recruiting on platforms like Coursera or LinkedIn Learning
Mentorship: Seeking guidance and advice from experienced HR recruiters
A HR recruiter is responsible for finding, screening, and hiring candidates for job openings within an organization.
HR recruiters work closely with hiring managers to understand job requirements and create job descriptions.
They source candidates through job boards, social media, networking, and other channels.
HR recruiters screen resumes, conduct interviews, and coordinate the hiring process.
They may also negotiate job...
I applied via Recruitment Consulltant and was interviewed before May 2017. There was 1 interview round.
I am a dedicated and experienced engineer with a passion for problem-solving and innovation.
Over 5 years of experience in mechanical engineering
Proficient in CAD software such as SolidWorks and AutoCAD
Strong analytical and problem-solving skills
Led a team in designing and implementing a new manufacturing process
Continuous learner, always seeking to improve skills and knowledge
I prefer to focus on the value I can bring to the role rather than my current salary.
I believe my skills and experience are more important than my current salary
I am open to discussing salary expectations based on the responsibilities of the role
I am looking for a competitive salary that reflects my qualifications and contributions
I applied via Walk-in and was interviewed in Jun 2024. There was 1 interview round.
Control charts are statistical tools used to monitor processes and detect any changes or variations in data.
Control charts help in identifying if a process is stable or if there are any special causes of variation present.
Variable control charts are used when the data being measured is continuous, such as weight or length.
Attribute control charts are used when the data being measured is discrete and can be counted, suc...
There are 1000 microns in 1 mm.
1 mm is equal to 1000 microns
Micron is a unit of length equal to one millionth of a meter
Commonly used in fields like engineering and manufacturing
Aluminium die casting is a metal casting process that involves injecting molten aluminium into a steel mold under high pressure.
Aluminium die casting is a manufacturing process used to create complex shapes with high precision.
The molten aluminium is injected into a steel mold cavity at high pressure, which helps in producing parts with fine details and smooth surfaces.
Aluminium die casting is commonly used in automoti...
Samvardhana Motherson Group interview questions for popular designations
I have a strong background in quality engineering, proven track record of improving processes, and a passion for continuous improvement.
I have a Bachelor's degree in Engineering with a focus on quality control
I have successfully implemented lean manufacturing principles in my previous role, resulting in a 20% increase in efficiency
I am certified in Six Sigma and have led multiple projects that resulted in cost savings
ECN process stands for Engineering Change Notice process, which is used to document and track changes made to a product or process.
ECN process is used to document and track changes made to a product or process.
It involves creating a formal notice detailing the proposed change, including the reason for the change and its potential impact.
The notice is then reviewed and approved by relevant stakeholders before implementa...
BOM for harness refers to the Bill of Materials for the components used in the harness assembly.
BOM for harness includes a list of all components required for the harness assembly
It specifies the quantity of each component needed
BOM helps in ensuring all necessary parts are included in the assembly
Examples of components in a harness BOM: wires, connectors, terminals, protective sleeves
Get interview-ready with Top Samvardhana Motherson Group Interview Questions
I applied via Naukri.com and was interviewed in Jun 2024. There was 1 interview round.
Iterate through the array to find the second largest number.
Sort the array in descending order and return the second element.
Initialize two variables to keep track of the largest and second largest numbers while iterating through the array.
If the array contains duplicates, consider whether to include them in the comparison for the second largest number.
API gateway in microservices acts as a single entry point for all client requests, providing routing, authentication, and other functionalities.
API gateway handles all client requests and routes them to the appropriate microservice
It can perform authentication, rate limiting, load balancing, and caching
Helps in decoupling clients from individual microservices, simplifying the overall architecture
A discovery server is a component in a microservices architecture that helps services find and communicate with each other.
Discovery servers store information about available services
They allow services to register themselves and query for other services
Examples include Netflix Eureka, Consul, and Zookeeper
There are two ways of Exception handling in Java - using try-catch blocks and using throws keyword.
1. Using try-catch blocks to catch and handle exceptions
2. Using throws keyword to declare exceptions to be thrown to the calling method
I applied via Approached by Company and was interviewed in Nov 2024. There was 1 interview round.
I applied via Company Website and was interviewed in Mar 2024. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed before Jan 2024. There were 2 interview rounds.
Self introduction,BD process,pm process, Document mantain,spare mantain,
Top trending discussions
The duration of Samvardhana Motherson Group interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 195 interviews
Interview experience
based on 3.1k reviews
Rating in categories
Assistant Engineer
950
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
658
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
575
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
499
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
496
salaries
| ₹0 L/yr - ₹0 L/yr |
Bharat Forge
Tata Motors
Mahindra & Mahindra
TVS Motor