Upload Button Icon Add office photos

Mikuni

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Mikuni Electrical GET Interview Questions and Answers

Updated 30 Jul 2023

Mikuni Electrical GET Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
No response

I applied via Walk-in and was interviewed in Jun 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all Resume tips
Round 2 - Aptitude Test 

Its a basic electrical , aptitude, reasoning,math and English

Round 3 - Group Discussion 

The gd is performed between the groups

Round 4 - One-on-one 

(2 Questions)

  • Q1. Explain star delta connection?
  • Ans. 

    Star delta connection is a method used to connect motors in electrical systems to reduce starting current.

    • It is used for starting large motors.

    • In star connection, the motor windings are connected in a star configuration, reducing voltage across each winding.

    • In delta connection, the windings are connected in a delta configuration, allowing the motor to run at full speed.

    • The switch from star to delta configuration is typ...

  • Answered by AI
  • Q2. Exaplain diode working?
  • Ans. 

    A diode is a semiconductor device that allows current to flow in one direction only.

    • Diodes are made of semiconductor materials such as silicon or germanium.

    • They have two terminals - an anode (positive) and a cathode (negative).

    • When a voltage is applied across the diode in the forward bias direction, it allows current to flow.

    • In the reverse bias direction, the diode blocks current flow.

    • Diodes are commonly used in rectif...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Don't worry it's a basic interview.but you must have a subjective knowledge about your core branch.

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

Aptitude test related to your field

Round 3 - HR 

(2 Questions)

  • Q1. Based on yours graduation degree and automation releted questions
  • Q2. Last year project related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - It's good to work with force
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. Hhjdjhd djjdhd jdjdj djdjdn jsjjd
  • Q2. Hdhdndjdjjd bddhdh jdjddj jdjdjd djdjdj

Interview Preparation Tips

Interview preparation tips for other job seekers - Dont worry
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Aug 2023. There were 4 interview rounds.

Round 1 - Aptitude Test 

In aptitude test , they asked questions regarding reasoning verbal, general knowledge and also about electrical subjects. 100 questions in 90min it was pretty tough and time consuming

Round 2 - Online Gamification 

(1 Question)

  • Q1. This round was easy there were few games which required presence of mind
Round 3 - Group Discussion 

They created a group of 8 as one group. My GD was online. My GD topic was "Impact of Iot in our lifes". They gave us 2min for preparation and 10min for discussion.

Round 4 - Technical 

(4 Questions)

  • Q1. What do you know about Mechatronics
  • Ans. 

    Mechatronics is a multidisciplinary field that combines mechanical engineering, electronics, computer science, and control engineering.

    • Combines mechanical engineering, electronics, computer science, and control engineering

    • Involves designing, developing, and controlling advanced systems

    • Examples include robotics, automated manufacturing systems, and automotive systems

  • Answered by AI
  • Q2. Difference between Bs4 and Bs6 engine
  • Ans. 

    BS4 engines comply with Bharat Stage 4 emission norms, while BS6 engines comply with Bharat Stage 6 emission norms.

    • BS4 engines have higher emissions of pollutants like NOx and PM compared to BS6 engines

    • BS6 engines have advanced emission control technologies like Selective Catalytic Reduction (SCR) and Diesel Particulate Filter (DPF)

    • BS6 engines are more fuel-efficient and environmentally friendly compared to BS4 engines

  • Answered by AI
  • Q3. Mechatronics application in real life
  • Ans. 

    Mechatronics is the integration of mechanical, electrical, and computer engineering to create useful products and systems.

    • Automated manufacturing systems

    • Robotics

    • Automated guided vehicles

    • Smart home technology

    • Medical devices

  • Answered by AI
  • Q4. What improvements can be done to improve the performance of electrical vehicle
  • Ans. 

    Improving the performance of electrical vehicles can be achieved through various methods.

    • Increasing battery capacity for longer range

    • Enhancing charging infrastructure for faster charging times

    • Improving motor efficiency for better acceleration and speed

    • Reducing vehicle weight to increase energy efficiency

    • Implementing regenerative braking to capture energy during deceleration

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - The person who interviewed us did not have any electrical knowledge so he concentrated on the electronics and mechanical part . It is better to have knowledge about current Technologies and general knowledge
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Test is very easy in online mode

Round 2 - Group Discussion 

It is some what difficult but i cracked it

Round 3 - Technical 

(1 Question)

  • Q1. Here asked lot of technical questions in electronics and sensor based questions

Electrical GET Interview Questions & Answers

Ashok Leyland user image 078BELE Avni Rathore

posted on 10 Nov 2024

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement and was interviewed in May 2024. There was 1 interview round.

Round 1 - Aptitude Test 

100 questions in 1 hr moderate level

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Aptitude Test 

It was good and all question are of quantitative analysis

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Online test conducted by company

Round 2 - Technical 

(1 Question)

  • Q1. Asked question related to mechanical filed

Interview Preparation Tips

Interview preparation tips for other job seekers - good
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Aptitude Test 

Easy questions we can write easily

Round 2 - Asked about job description 

(2 Questions)

  • Q1. About time and distance question
  • Q2. Logical question

Interview Preparation Tips

Interview preparation tips for other job seekers - I qualified first round and asked for documents and all after that I got response after 1 month about jd i submitted no response up to now
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in May 2024. There were 4 interview rounds.

Round 1 - Aptitude Test 

It was a test combined with technical and aptitude knowledge.

Round 2 - Group Discussion 

My GD topic was Education in India vs Education in Abroad.

Round 3 - Technical 

(2 Questions)

  • Q1. Question from Electrical Machine and types of machines.
  • Q2. Question from Power Electronics
Round 4 - HR 

(2 Questions)

  • Q1. Introduction of myself
  • Q2. Family Introduction
Contribute & help others!
anonymous
You can choose to be anonymous

Mikuni Interview FAQs

How many rounds are there in Mikuni Electrical GET interview?
Mikuni interview process usually has 4 rounds. The most common rounds in the Mikuni interview process are Resume Shortlist, Aptitude Test and Group Discussion.
What are the top questions asked in Mikuni Electrical GET interview?

Some of the top questions asked at the Mikuni Electrical GET interview -

  1. Explain star delta connecti...read more
  2. Exaplain diode worki...read more

Recently Viewed

INTERVIEWS

Mikuni

20 top interview questions

INTERVIEWS

MEP Infrastructure Developers

No Interviews

INTERVIEWS

Essel Infraprojects

No Interviews

JOBS

GrowthJockey

No Jobs

SALARIES

Mikuni

INTERVIEWS

Mikuni

No Interviews

JOBS

Accenture

No Jobs

INTERVIEWS

Pie Infocomm

No Interviews

INTERVIEWS

Precision Pyramid

No Interviews

DESIGNATION

Tell us how to improve this page.

Mikuni Electrical GET Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Fast track your campus placements

View all
Senior Engineer
98 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
92 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Diploma Trainee Engineer
61 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
37 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
36 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Mikuni with

Bharat Forge

3.9
Compare

Mahindra & Mahindra

4.1
Compare

Tata Motors

4.2
Compare

TVS Motor

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent