Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Metso Team. If you also belong to the team, you can get access from here

Metso Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Metso Junior Engineer Interview Questions, Process, and Tips

Updated 9 May 2022

Metso Junior Engineer Interview Experiences

1 interview found

I applied via Company Website and was interviewed in Apr 2022. There was 1 interview round.

Round 1 - Technical 

(4 Questions)

  • Q1. Say something about press filter
  • Ans. 

    Press filter is a device used for separating solids from liquids.

    • It works by applying pressure to the mixture to force the liquid through a filter media while retaining the solids.

    • It is commonly used in industries such as chemical, pharmaceutical, and food processing.

    • Examples of press filters include belt filter press, plate and frame filter press, and rotary vacuum-drum filter.

    • Press filters are efficient and cost-effe...

  • Answered by AI
  • Q2. How to maintain pressure in press filter
  • Ans. 

    To maintain pressure in press filter, ensure proper sealing, check for leaks, and adjust feed rate and pressure settings.

    • Check for proper sealing of the filter plates and gaskets

    • Inspect for any leaks in the system and repair them promptly

    • Adjust the feed rate and pressure settings as per the manufacturer's recommendations

    • Regularly clean and maintain the filter to prevent clogging and pressure drop

    • Monitor the pressure ga...

  • Answered by AI
  • Q3. What is the model of hydraulic cylinder in press filter
  • Ans. 

    The model of hydraulic cylinder in press filter depends on the specific press filter being used.

    • The model of hydraulic cylinder can vary depending on the size and capacity of the press filter.

    • Some common models of hydraulic cylinders used in press filters include tie rod cylinders and welded cylinders.

    • The specific model of hydraulic cylinder used in a press filter can be determined by consulting the manufacturer's spec...

  • Answered by AI
  • Q4. Which type bearing use in bogie wheel
  • Ans. 

    Roller bearings are commonly used in bogie wheels.

    • Roller bearings are preferred over plain bearings due to their ability to handle heavy loads and reduce friction.

    • Tapered roller bearings are commonly used in locomotive bogie wheels.

    • Cylindrical roller bearings are also used in some bogie wheels.

    • The type of bearing used depends on the specific application and load requirements.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on those jobs that you meet the minimum requirements for, you should match the mejority of the keywords in the job description.

Interview questions from similar companies

I applied via Referral and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Ask about technical project done during my b.tech
Round 3 - HR 

(3 Questions)

  • Q1. Why should we hire you?
  • Ans. 

    I have extensive experience in senior engineering roles and a proven track record of delivering high-quality results.

    • I have a deep understanding of complex engineering concepts and can apply them effectively in real-world scenarios.

    • I have successfully led and managed teams, ensuring efficient collaboration and achieving project goals.

    • I consistently stay updated with the latest industry trends and technologies, allowing...

  • Answered by AI
  • Q2. Why are you looking for a change?
  • Ans. 

    Seeking new challenges and growth opportunities in a different organization.

    • Looking for a more challenging role

    • Seeking professional growth and development

    • Interested in exploring new technologies and industries

    • Want to work in a different organizational culture

    • Seeking better work-life balance

  • Answered by AI
  • Q3. Share details of your previous job.
  • Ans. 

    I worked as a Senior Engineer at XYZ Company.

    • Led a team of engineers in developing and implementing new software solutions.

    • Collaborated with cross-functional teams to ensure project success.

    • Designed and implemented scalable and efficient code.

    • Performed code reviews and provided technical guidance to junior engineers.

    • Successfully delivered multiple projects on time and within budget.

    • Implemented best practices and optimi...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Jindal Aluminium Senior Engineer interview:
  • Technical Skills
  • Analytical skills
  • Root Cause
  • Presentation Skills
Interview preparation tips for other job seekers - It's best platform for everyone who wants to learn.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What is your strength
  • Q2. What is your weakness
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Basic aptitude test with time limit

Round 3 - One-on-one 

(2 Questions)

  • Q1. Basically questions about the trade about you are working or knowledge of job and experience , the job in the field of interest is very important
  • Q2. Ask about educational qualification and any achievements

Interview Preparation Tips

Interview preparation tips for other job seekers - Stay focused and keep your goals clear to get the final round

Interview Questionnaire 

1 Question

  • Q1. Lots of questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Lots of answers. Give proper answer and you will be selected

I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Give one example of learn from failure
  • Ans. 

    One example of learning from failure is failing to meet a project deadline and using that experience to better estimate future timelines.

    • Reflect on what went wrong and why

    • Identify areas for improvement

    • Develop a plan to address those areas

    • Apply the lessons learned to future projects

    • Communicate the lessons learned to team members

    • Example: Failing to deliver a project on time due to poor communication with stakeholders. Th...

  • Answered by AI
Round 3 - HR 

(1 Question)

  • Q1. How will you manage work load in job
  • Ans. 

    I will prioritize tasks, delegate when necessary, and communicate with my team to ensure efficient workload management.

    • Create a to-do list and prioritize tasks based on urgency and importance

    • Delegate tasks to team members based on their strengths and workload

    • Communicate with team members to ensure everyone is on the same page and workload is evenly distributed

    • Take breaks and practice self-care to avoid burnout

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Hindalco Industries Senior Engineer interview:
  • Technical Skills
Interview preparation tips for other job seekers - Keep track you applied job, search relevant job

I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Why sharp corners are avoided in casting?
  • Ans. 

    Sharp corners are avoided in casting to prevent stress concentration and improve the overall strength and quality of the casting.

    • Sharp corners can lead to stress concentration, which can cause cracks or failure in the casting.

    • Rounded corners distribute stress more evenly, reducing the likelihood of defects.

    • Sharp corners can also create difficulties during the casting process, such as mold filling and solidification iss...

  • Answered by AI

Interview Preparation Tips

General Tips: It was held at Calcutta in year 1984.All the members were good and cooperative and I got selected too.But job freeze was immediately implemented and it took 1 year for final result. I received it on the day I was attending my 2 ND semester exam of M.Tech. and so preferred to join Itiltd which had posted me in Raebareli a nearer place to my locality turning out to be worst decision of my life.


Skills: Technical Questions, Technical Questions, Presentation Skills
Duration: 1-3 Months

I applied via Referral and was interviewed in May 2019. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What is neutonian fluid ? , Stages of fracture, working of engine, basic thermodynamics questions , questions from strength of material ,
  • Ans. 

    Newtonian fluid is a type of fluid that follows Newton's law of viscosity.

    • Newtonian fluid exhibits a linear relationship between shear stress and shear rate.

    • Examples of Newtonian fluids include water, air, and most oils.

    • Stages of fracture include initiation, propagation, and final failure.

    • Engine works by converting heat energy into mechanical work.

    • Basic thermodynamics questions may include concepts like the first and s...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare for your core subjects especially the basic one which we use to study in our 2nd and 3rd year of engineering. These will help to stand out and score better in interview.
They have conducted one hour long interview bombarding questions from core mechanical background and questions from your skills too which you have mentioned in your resume.

I applied via Walk-in and was interviewed before Dec 2019. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. About your self
  • Q2. How to execute desputes between contractor and company
  • Ans. 

    Disputes can be resolved through negotiation, mediation, arbitration or litigation.

    • Negotiation involves discussion and compromise to reach a mutually acceptable solution.

    • Mediation involves a neutral third party who helps the parties reach a settlement.

    • Arbitration involves a neutral third party who makes a binding decision after hearing both sides.

    • Litigation involves taking the dispute to court and having a judge or jur...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Maintain your confidence level and be positive & learning attitude
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
-
Round 1 - Aptitude Test 

Some basis questions

Round 2 - Technical 

(1 Question)

  • Q1. Basis question as induction motor and transformer

Metso Interview FAQs

How many rounds are there in Metso Junior Engineer interview?
Metso interview process usually has 1 rounds. The most common rounds in the Metso interview process are Technical.
What are the top questions asked in Metso Junior Engineer interview?

Some of the top questions asked at the Metso Junior Engineer interview -

  1. What is the model of hydraulic cylinder in press fil...read more
  2. How to maintain pressure in press fil...read more
  3. Which type bearing use in bogie wh...read more

Tell us how to improve this page.

Metso Junior Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Rungta Mines Interview Questions
4.0
 • 100 Interviews
Coal India Interview Questions
4.0
 • 48 Interviews
Vedanta Limited Interview Questions
3.8
 • 48 Interviews
Hindustan Zinc Interview Questions
3.8
 • 45 Interviews
Mecon Interview Questions
3.9
 • 43 Interviews
View all
Metso Junior Engineer Salary
based on 17 salaries
₹2.8 L/yr - ₹4.6 L/yr
At par with the average Junior Engineer Salary in India
View more details

Metso Junior Engineer Reviews and Ratings

based on 12 reviews

4.3/5

Rating in categories

4.2

Skill development

3.8

Work-life balance

4.2

Salary

4.0

Job security

4.1

Company culture

4.0

Promotions

3.8

Work satisfaction

Explore 12 Reviews and Ratings
Design Engineer
175 salaries
unlock blur

₹3.6 L/yr - ₹11 L/yr

Assistant Manager
149 salaries
unlock blur

₹6.2 L/yr - ₹18 L/yr

Senior Engineer
136 salaries
unlock blur

₹5 L/yr - ₹15.5 L/yr

Engineer
96 salaries
unlock blur

₹2.6 L/yr - ₹9.6 L/yr

Deputy Manager
66 salaries
unlock blur

₹9.9 L/yr - ₹25.8 L/yr

Explore more salaries
Compare Metso with

Hindalco Industries

4.2
Compare

Rungta Mines

4.0
Compare

Hindustan Zinc

3.8
Compare

Vedanta Resources

3.7
Compare
Did you find this page helpful?
Yes No
write
Share an Interview