Filter interviews by
Clear (1)
I applied via Walk-in and was interviewed before Apr 2021. There was 1 interview round.
Top trending discussions
I applied via Walk-in and was interviewed in Jul 2020. There was 1 interview round.
Four stroke engines are more efficient and produce less pollution than two stroke engines.
Four stroke engines have a separate intake and exhaust stroke, allowing for better fuel combustion and less pollution.
Two stroke engines have a combined intake and exhaust stroke, leading to incomplete fuel combustion and more pollution.
Four stroke engines also have better fuel economy and longer lifespan than two stroke engines.
F...
I applied via Approached by Company and was interviewed before Dec 2021. There were 3 interview rounds.
First off all, we ought to have some sortoff automobile and production knowledge because they will definitely check our technical skill secondly, listening skill and fluency plays significant factor
TQBM stands for 'Tudo Que Bem' which means 'Everything is fine' in Portuguese. BOM means 'good' in Portuguese.
TQBM is a common phrase used in Brazil to ask if everything is okay.
BOM is often used as a response to TQBM to indicate that everything is good.
Both TQBM and BOM are informal and commonly used in everyday conversations.
Example: A friend asks 'TQBM?' and you respond 'BOM, e voce?' which means 'Everything is fine
I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.
I applied via Company Website
TTR stands for Total Thickness Range and is required for powder coating process to ensure proper adhesion and durability.
TTR is the range of thickness of the substrate and any coatings applied to it
It is important for powder coating as it ensures proper adhesion and durability
If the TTR is too large, the coating may not adhere properly or may crack and peel over time
Examples of substrates with varying TTR include alumi
Detection and prevention poka-yoke refers to the use of techniques to identify and prevent errors in a process.
Poka-yoke is a Japanese term for mistake-proofing
Detection poka-yoke involves identifying errors as they occur
Prevention poka-yoke involves designing processes to prevent errors from occurring
Examples of poka-yoke include using checklists, color-coding, and physical barriers
Poka-yoke can improve quality, reduc
Decrease in pH can occur due to various factors in conversion coating.
Decrease in pH can be caused by the addition of an acid or acidic solution.
Presence of reactive metals in the coating can lead to a decrease in pH.
Contamination by organic materials or impurities can also lower the pH.
Chemical reactions during the conversion coating process may result in pH decrease.
Examples of conversion coatings include phosphating
To prepare 0.1 N H2SO4 & NaOH, calculate the required amount of solute and dissolve it in distilled water.
Calculate the molar mass of H2SO4 and NaOH
Determine the required amount of solute using the formula: N = (W/M) x (1000/V)
Dissolve the calculated amount of solute in distilled water to make 1 liter of solution
Standardize the solution using a primary standard
Use a burette to measure the volume of solution needed for
To cross verify 0.1 normality H2SO4, use a standard solution of NaOH and an indicator.
Prepare a standard solution of NaOH of known concentration.
Add a few drops of an indicator such as phenolphthalein to the H2SO4 solution.
Titrate the H2SO4 solution with the NaOH solution until the endpoint is reached.
The endpoint is when the indicator changes color, indicating that all the H2SO4 has reacted with the NaOH.
Calculate the...
Prepare a pH buffer solution as per defined standard in tablet.
Determine the required pH value and buffer capacity
Select the appropriate buffer system and calculate the required amounts of buffer components
Dissolve the buffer components in water and adjust the pH as necessary
Check the pH and adjust if necessary
Filter the solution and store in a clean container
Use a calibrated pH meter to verify the pH of the solution
I applied via Company Website and was interviewed in Aug 2024. There was 1 interview round.
I applied via Job Fair and was interviewed before Oct 2023. There was 1 interview round.
Cummins can keep old employees permanent based on performance and business needs.
Cummins can consider keeping old employees permanent if they have a good performance record.
The decision to keep old employees permanent may also depend on the business needs and budget constraints.
Old employees may be offered permanent positions if they have valuable skills and experience that are beneficial to the company.
Cummins may hav...
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 3 interview rounds.
A relay holding circuit diagram is used to keep the relay in the energized state even after the control signal is removed.
The circuit typically includes a holding contact that maintains the relay coil energized.
A latching relay can also be used for holding without continuous power supply.
Examples: ladder logic diagram with a holding contact, latching relay circuit diagram.
PNP and NPN are types of bipolar junction transistors commonly used in electronic circuits.
PNP transistor has a layer of N-type semiconductor between two layers of P-type semiconductor, while NPN transistor has a layer of P-type semiconductor between two layers of N-type semiconductor.
In a PNP transistor, current flows from the emitter to the base and then to the collector, while in an NPN transistor, current flows fro...
There are various types of sensors used for different purposes.
Temperature sensors (e.g. thermocouples, thermistors)
Pressure sensors (e.g. piezoelectric sensors)
Motion sensors (e.g. accelerometers, gyroscopes)
Proximity sensors (e.g. ultrasonic sensors)
Light sensors (e.g. photodiodes, phototransistors)
PLC stands for Programmable Logic Controller, which is a digital computer used for automation of electromechanical processes.
PLC is used to control machinery in manufacturing processes, such as assembly lines, robotic devices, or any activity that requires high reliability control.
It is programmed using a specialized computer language, typically ladder logic or function block diagram.
PLCs are commonly used in industrie...
I applied via Recruitment Consultant and was interviewed in Jul 2021. There was 1 interview round.
To convince a customer for a product, I would highlight its unique features, demonstrate its benefits, provide testimonials, and offer a trial or discount.
Highlight the unique features of the product
Demonstrate the benefits it offers
Provide testimonials from satisfied customers
Offer a trial or discount to encourage the customer to try the product
I applied via Recruitment Consulltant and was interviewed in Feb 2022. There was 1 interview round.
based on 2 reviews
Rating in categories
Senior Engineer
36
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Engineer
35
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
31
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
29
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Manager
24
salaries
| ₹0 L/yr - ₹0 L/yr |
Bosch
Cummins
Tata Motors
Maruti Suzuki