Upload Button Icon Add office photos

Marelli

Compare button icon Compare button icon Compare

Filter interviews by

Marelli Calibration Engineer Interview Questions and Answers

Updated 15 May 2024

Marelli Calibration Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is calibration
  • Ans. 

    Calibration is the process of comparing measurements of an instrument or device to a known standard to ensure accuracy.

    • Calibration involves adjusting the instrument to align with the standard.

    • It is essential for maintaining accuracy and reliability of instruments.

    • Examples include calibrating thermometers, scales, and pressure gauges.

  • Answered by AI
  • Q2. How to to performance calibration
  • Ans. 

    Performance calibration involves adjusting and fine-tuning instruments to ensure accurate and consistent results.

    • Understand the specifications and requirements of the instrument being calibrated

    • Use calibration standards and procedures to make adjustments

    • Document all calibration activities for traceability and compliance

    • Verify the performance of the instrument after calibration

    • Repeat the calibration process regularly to

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - get good knowledge in you domain and don't forget the engine basics

Interview questions from similar companies

Round 1 - Technical 

(1 Question)

  • Q1. Project Details in previous company
Round 2 - Technical 

(1 Question)

  • Q1. Skills and how I use my skills in my work
Round 3 - HR 

(1 Question)

  • Q1. General discussions, salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Be perfect in what you work, and he confident in your own skills and be honest with what you know
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Prdouct knowledge
Round 2 - HR 

(1 Question)

  • Q1. Salary discussion and relocation

Interview Preparation Tips

Interview preparation tips for other job seekers - It is an easy interview
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Group Discussion 

Casting should be thorough

Round 2 - Case Study 

Aluminium die Casting

Interview Preparation Tips

Interview preparation tips for other job seekers - Casting prep well
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - One-on-one 

(3 Questions)

  • Q1. Related to old experience with explanations.
  • Q2. Why are you join this group.
  • Q3. How to improve for skill manpower
  • Ans. 

    To improve skill manpower, focus on training programs, mentorship, career development, and recruitment strategies.

    • Implement regular training programs to enhance skills and knowledge

    • Provide mentorship opportunities for junior employees to learn from experienced professionals

    • Offer career development paths and opportunities for advancement within the organization

    • Revise recruitment strategies to attract top talent with the

  • Answered by AI
Round 3 - Technical 

(4 Questions)

  • Q1. OEE calculation
  • Q2. TPM with explanation
  • Ans. 

    TPM stands for Total Productive Maintenance, a proactive approach to maintenance that aims to maximize equipment effectiveness.

    • TPM focuses on preventing equipment breakdowns through regular maintenance and employee involvement.

    • It involves setting up autonomous maintenance teams, conducting planned maintenance activities, and improving overall equipment efficiency.

    • TPM also emphasizes training employees to take ownership...

  • Answered by AI
  • Q3. 7 QC Tools Poke yoke
  • Q4. Kaizen done last group
Round 4 - HR 

(2 Questions)

  • Q1. Salary Expectations
  • Q2. How to join this group
Interview experience
3
Average
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. End-to-end process for wiring harness
  • Ans. 

    The end-to-end process for wiring harness involves designing, manufacturing, testing, and installation.

    • Designing the wiring harness based on the electrical requirements and specifications

    • Manufacturing the harness using automated machines or manual labor

    • Testing the harness for electrical continuity, insulation resistance, and other parameters

    • Installing the harness in the vehicle or equipment

    • Ensuring proper routing and s...

  • Answered by AI
  • Q2. What is the FAI process FAI from 1 FAI from 2 and FAI from 3
  • Ans. 

    FAI stands for First Article Inspection, a process to verify the initial production run meets all requirements.

    • FAI from 1 is the initial inspection of the first article produced in a production run

    • FAI from 2 is the inspection of the first article produced after changes have been made to the production process

    • FAI from 3 is the inspection of the first article produced after changes have been made to the design or enginee...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - always be humble in learning.Be confidence when you attending the interview

I applied via Naukri.com and was interviewed in Feb 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Previous experience, Technical Question related your work etc
Round 3 - HR 

(1 Question)

  • Q1. Question related your family background etc

Interview Preparation Tips

Topics to prepare for Samvardhana Motherson Group Senior Engineer interview:
  • According to your work profile
Interview preparation tips for other job seekers - Great work to learn. They follow all the Japanese culture & system

I applied via Naukri.com and was interviewed before Sep 2021. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What was your role in previous company?
  • Q2. What are improvement you have done?

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare basics,be confident and wear proper formal cloths.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Spc, msa, iatf , process capability
  • Q2. Manpower handling

Interview Preparation Tips

Topics to prepare for Samvardhana Motherson Group Senior Engineer interview:
  • SPC
  • MSA
  • Iatf
Interview preparation tips for other job seekers - Easy interview process
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. About session and state management
  • Q2. Duplicate row deletion
  • Q3. Sql server joins

Interview Preparation Tips

Interview preparation tips for other job seekers - it was very simple

Marelli Interview FAQs

How many rounds are there in Marelli Calibration Engineer interview?
Marelli interview process usually has 1 rounds. The most common rounds in the Marelli interview process are Technical.
What are the top questions asked in Marelli Calibration Engineer interview?

Some of the top questions asked at the Marelli Calibration Engineer interview -

  1. how to to performance calibrat...read more
  2. what is calibrat...read more

Tell us how to improve this page.

Marelli Calibration Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Bosch Interview Questions
4.2
 • 334 Interviews
Yazaki Interview Questions
3.8
 • 134 Interviews
Valeo Interview Questions
4.0
 • 88 Interviews
DENSO Interview Questions
4.1
 • 72 Interviews
JTEKT Interview Questions
4.2
 • 65 Interviews
Tenneco Interview Questions
3.8
 • 60 Interviews
Faurecia Interview Questions
3.9
 • 59 Interviews
Bharat Forge Interview Questions
3.9
 • 55 Interviews
View all
Marelli Calibration Engineer Salary
based on 4 salaries
₹9 L/yr - ₹19 L/yr
323% more than the average Calibration Engineer Salary in India
View more details
Assistant Manager
214 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
189 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
115 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
104 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Software Engineer
66 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Marelli with

Bosch

4.2
Compare

DENSO

4.1
Compare

Continental

3.9
Compare

Valeo

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview