Upload Button Icon Add office photos

Filter interviews by

Lumax Auto Technologies Ltd Line Incharge Interview Questions and Answers

Updated 22 Feb 2024

Lumax Auto Technologies Ltd Line Incharge Interview Experiences

1 interview found

Line Incharge Interview Questions & Answers

user image Anonymous

posted on 22 Feb 2024

Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via Campus Placement and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. About the knowledge of study of mine introduction about my self
Round 2 - One-on-one 

(1 Question)

  • Q1. Your qualifications

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Jun 2023. There were 7 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Group Discussion 

Share knowledge about past experience

Round 3 - Aptitude Test 

Written test, reasoning, mathematics and coding test

Round 4 - Technical 

(2 Questions)

  • Q1. Technical questions about motor , electrical knowledge and electrical circuit basic or knowledge about course
  • Q2. Different type motor and definition or electrical power knowledge
Round 5 - Programmable logic controller 

(1 Question)

  • Q1. PLC logic create and discuss knowledge about PLC only
Round 6 - Plant hard discussion 

(1 Question)

  • Q1. Discussed about self and i share my past experience
Round 7 - HR 

(1 Question)

  • Q1. Salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Before interview, prepare and read the concept about your field.
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2023. There was 1 interview round.

Round 1 - Aptitude Test 

There are vav based questions and answers

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus on JD.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Nov 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Related experience
  • Ans. What is your experience in this line . How many type knowledge of testing equipments
  • Answered Anonymously
Round 2 - HR 

(1 Question)

  • Q1. How much salary you preferred
  • Ans. My expectations 30% high my current ctc
  • Answered Anonymously

Interview Questionnaire 

4 Questions

  • Q1. Difference between VA & VE
  • Ans. 

    VA is value analysis, while VE is value engineering. Both are cost-saving techniques used in product development.

    • VA is a systematic review of a product's components and functions to identify areas where cost can be reduced without affecting performance.

    • VE is a more comprehensive approach that involves rethinking the entire product design to achieve cost savings while improving performance.

    • VA is typically used in the ea...

  • Answered by AI
  • Q2. How to calculate cost of the plastic molding components
  • Ans. 

    The cost of plastic molding components can be calculated by considering factors such as material cost, tooling cost, labor cost, and overhead cost.

    • Determine the material cost per unit of the component

    • Calculate the tooling cost, which includes the cost of the mold and any necessary equipment

    • Factor in the labor cost, which includes the cost of operating the molding machine and any necessary labor for finishing and assemb...

  • Answered by AI
  • Q3. Name some polymers
  • Ans. 

    Polymers are large molecules made up of repeating units called monomers. They have a wide range of applications in various fields.

    • Polyethylene

    • Polypropylene

    • Polyvinyl chloride

    • Polystyrene

    • Polyester

    • Polyurethane

    • Nylon

    • Teflon

    • Silicone

    • Rubber

  • Answered by AI
  • Q4. System audits

Interview Preparation Tips

Interview preparation tips for other job seekers - Be calm & perform
Round 1 - Technical 

(1 Question)

  • Q1. 5S , LINE BALACING, KAIZEN ,FMEA

Interview Preparation Tips

Interview preparation tips for other job seekers - ITS GOOD ORGANIZATION , SUPPORTING TEAM , GOOD WORK CULTURE
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What is phase of APQP
  • Ans. 

    APQP stands for Advanced Product Quality Planning, which is a phase-based approach to product development in the automotive industry.

    • APQP consists of five phases: Planning, Product Design, Process Design, Product and Process Validation, and Feedback and Continuous Improvement.

    • Each phase has specific deliverables and activities that must be completed before moving on to the next phase.

    • For example, in the Product Design ...

  • Answered by AI
  • Q2. EXPLAIN IATF AND HOW ITS WORK FOR AUTOMOTIVE INDUSTRY
  • Ans. 

    IATF (International Automotive Task Force) is a global organization that develops and maintains quality management standards for the automotive industry.

    • IATF collaborates with automotive manufacturers to create unified quality standards

    • IATF 16949 is the latest version of the standard, focusing on continuous improvement and defect prevention

    • Certification to IATF standards is often required for suppliers to automotive OE

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - its very good
they gives 1st prefrence ref. candidate
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - One-on-one 

(2 Questions)

  • Q1. What is HPDC process
  • Ans. 

    HPDC stands for High Pressure Die Casting, a process used to produce complex metal parts by injecting molten metal into a mold under high pressure.

    • HPDC involves injecting molten metal into a steel mold cavity at high pressure.

    • The high pressure helps in filling the mold quickly and accurately, resulting in high precision parts.

    • This process is commonly used in automotive, aerospace, and electronics industries for produci...

  • Answered by AI
  • Q2. Cost saving projects

I applied via Walk-in and was interviewed in May 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Production related questions
  • Q2. Working flow rated questions
  • Q3. Any other factory related
Round 3 - HR 

(1 Question)

  • Q1. Salary related questions
Round 4 - Group Discussion 
Pro Tip by AmbitionBox:
Don’t treat group discussions as an argument. Group discussion is about reaching a meaningful conclusion.
View all tips

Interview Preparation Tips

Interview preparation tips for other job seekers - Need good job for my skills and production related.

I applied via Naukri.com and was interviewed in Jul 2019. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What's process engineering works
  • Ans. 

    Process engineering involves designing, optimizing, and managing industrial processes to improve efficiency and productivity.

    • Process engineering focuses on analyzing and improving processes in various industries such as manufacturing, chemical, and pharmaceutical.

    • It involves identifying bottlenecks, reducing waste, and implementing process improvements to enhance productivity.

    • Process engineers use tools like process fl...

  • Answered by AI
  • Q2. What's the difference between cp and pp
  • Ans. 

    cp and pp are both commands in Unix-like operating systems, but they have different functionalities.

    • cp stands for 'copy' and is used to copy files or directories from one location to another.

    • pp stands for 'print and pause' and is used to print files with pagination, pausing after each page.

    • cp can be used to create a duplicate of a file or directory, while pp is used for printing files in a controlled manner.

    • Example: cp...

  • Answered by AI
  • Q3. What's control plan
  • Ans. 

    A control plan is a documented procedure that outlines the steps and measures taken to ensure quality and consistency in a manufacturing process.

    • Control plans are commonly used in industries such as automotive, aerospace, and electronics.

    • They include details on the process steps, key characteristics, measurement methods, and acceptable tolerances.

    • Control plans help identify potential risks, prevent defects, and ensure ...

  • Answered by AI
  • Q4. What's smed
  • Ans. 

    SMED stands for Single Minute Exchange of Die. It is a lean manufacturing technique used to reduce the time it takes to change over a production process.

    • SMED is used to minimize downtime during changeovers

    • It focuses on separating internal and external setup tasks

    • The goal is to convert as many internal setup tasks to external setup tasks

    • By reducing setup time, production flexibility and efficiency are improved

  • Answered by AI
  • Q5. What's capex
  • Ans. 

    Capex stands for capital expenditure, which refers to the funds used by a company to acquire, upgrade, or maintain physical assets.

    • Capex is an investment made by a company to purchase or improve long-term assets such as buildings, equipment, or technology.

    • It is different from operational expenses (opex) which are ongoing costs to run the business.

    • Capex is typically planned and budgeted for in advance.

    • Examples of capex ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared as per your resume shared.

Skills evaluated in this interview

Lumax Auto Technologies Ltd Interview FAQs

How many rounds are there in Lumax Auto Technologies Ltd Line Incharge interview?
Lumax Auto Technologies Ltd interview process usually has 2 rounds. The most common rounds in the Lumax Auto Technologies Ltd interview process are HR and One-on-one Round.

Tell us how to improve this page.

Lumax Auto Technologies Ltd Line Incharge Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Knorr-Bremse Interview Questions
3.9
 • 56 Interviews
Goodyear Interview Questions
3.6
 • 55 Interviews
Sanden Vikas Interview Questions
4.0
 • 45 Interviews
FCC Clutch Interview Questions
4.0
 • 36 Interviews
Shivam Autotech Interview Questions
3.6
 • 30 Interviews
View all
Assistant Manager
56 salaries
unlock blur

₹4.5 L/yr - ₹10.5 L/yr

Assistant Engineer
53 salaries
unlock blur

₹2 L/yr - ₹4.1 L/yr

Production Engineer
46 salaries
unlock blur

₹1.6 L/yr - ₹4.8 L/yr

Engineer
37 salaries
unlock blur

₹2.4 L/yr - ₹5.1 L/yr

Quality Engineer
36 salaries
unlock blur

₹1 L/yr - ₹4.5 L/yr

Explore more salaries
Compare Lumax Auto Technologies Ltd with

Knorr-Bremse

3.9
Compare

Greaves Cotton

4.1
Compare

Sanden Vikas

4.0
Compare

Victora Auto Private Limited

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview