AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Likhitha Infrastructure Site Supervisor Interview Questions and Answers
Likhitha Infrastructure Site Supervisor Interview Experiences
1 interview found
NAGENDRA SINGH
Selected
I appeared for an interview before Jan 2022.
(2 Questions)
- Q1. 01 02What is difference between welding and fusion Full form of HDPE Pipe What is full form of PNG
- Ans.
Welding involves melting and joining two metal pieces, while fusion involves melting and joining two plastic pieces.
Welding is used for joining metals, while fusion is used for joining plastics.
Welding involves the use of heat and pressure to join two metal pieces, while fusion involves the use of heat to melt and join two plastic pieces.
Examples of welding include arc welding, gas welding, and resistance welding, whil...
- Q2. What is Full name of Gi
- Ans.
Gi is not a full name, it could refer to many things depending on the context.
Gi could refer to a person's nickname or shortened name, such as Giuseppe for Joseph
Gi could also refer to a company or organization, such as Gi Group or GI Sportz
In some contexts, Gi could refer to a type of clothing worn in martial arts, such as a Jiu-Jitsu Gi
Without more context, it is impossible to determine the full name of Gi
Interview Preparation Tips
Top trending discussions
Interview questions from similar companies
Anonymous
Selected
I appeared for an interview in Oct 2024, where I was asked the following questions.
- Q1. Tile start to end sequence
- Ans.
The tile installation process involves preparation, layout, cutting, and grouting for a successful finish.
1. Surface Preparation: Ensure the substrate is clean, dry, and level. Example: Remove old flooring or debris.
2. Layout Planning: Measure and mark the layout to avoid small tile cuts at edges. Example: Use chalk lines for guidance.
3. Cutting Tiles: Use a tile cutter or wet saw for precise cuts. Example: Cut tiles t...
- Q2. Steel BBS Reinforcement
- Q3. Gypsum start to end checking
I applied via Company Website and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
4 Questions
- Q1. My CV and resume my qualification others Dinloma my work position my desiction work
- Q2. My name Rofizul hoque bepari my father's name Hasmot ali bepari vill Atghari tari P. O Dighaltari ps Galokganj dist Dhubri Assam
- Q3. Your resume
- Ans. BA passd major philosophy
- Q4. Working as supervisor ABCI infrastructure 1oct 2013 to sept 2014 working as a junior Assistant at sissiborgaon Rev circle under updation project from 23 Nov 2015 to 30th Appril 2021
Interview Preparation Tips
(2 Questions)
- Q1. Hello what is your name
- Q2. How much salary you want
(2 Questions)
- Q1. Lets discuss about money
- Q2. Where do you want to go
(2 Questions)
- Q1. Where do you from
- Q2. Are you interested to work
Interview Preparation Tips
Selected
I applied via Naukri.com and was interviewed in Jan 2023. There were 3 interview rounds.
(1 Question)
- Q1. Question regarding Qs and Is 1200 having knowledge of L section and Cross section
(1 Question)
- Q1. Salary negotiation and joining date notice period
I applied via Walk-in and was interviewed in May 2022. There were 2 interview rounds.
Construction material and techniques
Construction labour management
Site work
Interview Preparation Tips
- Autocad
- REVIT Architecture
Selected
I applied via Naukri.com and was interviewed before Sep 2023. There was 1 interview round.
(4 Questions)
- Q1. Safety standards with refer codes
- Ans.
Safety standards are guidelines and regulations set by organizations or governments to ensure the safety of individuals in various environments.
Safety standards are established to prevent accidents and injuries in the workplace or other settings.
These standards often include specific codes and regulations that must be followed to maintain a safe environment.
Examples of safety standards with reference codes include OSHA...
- Q2. Field work experience,role and responsibilities.
- Q3. Electrical safety
- Q4. Lifting workSafety
Interview Preparation Tips
(3 Questions)
- Q1. What is the Density of cement?
- Ans.
The density of cement is around 1440 kg/m³.
The density of cement varies depending on the type of cement.
The density of Portland cement is around 1440 kg/m³.
The density of lightweight cement is around 1000 kg/m³.
The density of high-density cement is around 3000 kg/m³.
- Q2. What is clear cover in column?
- Ans.
Clear cover in column refers to the distance between the surface of the reinforcement and the outer surface of the concrete.
Clear cover is important to protect the reinforcement from corrosion and to ensure proper bonding between the reinforcement and concrete.
The required clear cover for columns depends on factors such as the type of structure, exposure conditions, and size of the reinforcement.
For example, in a coast...
- Q3. What is bending moment formula?
- Ans.
Bending moment formula calculates the internal bending moment in a beam or structure.
Bending moment formula is M = F * d
M is the bending moment, F is the force applied, and d is the distance from the force to the point of interest
Bending moment can be positive or negative depending on the direction of the force and the orientation of the beam
Bending moment is an important factor in designing and analyzing structures
Interview Preparation Tips
- Bis 456
Interview Questionnaire
5 Questions
- Q1. What the thickness of compreg ply and it's size
- Ans.
The thickness of compreg ply varies depending on its intended use and application. Its size can also vary depending on the manufacturer and customer requirements.
The thickness of compreg ply can range from 3mm to 25mm or more
The size of compreg ply can vary from 4ft x 8ft to 5ft x 10ft or more
The thickness and size of compreg ply can be customized based on the specific requirements of the project
Compreg ply is commonly...
- Q2. Maximum reapetation of ply shuttering
- Ans.
The maximum repetition of ply shuttering depends on various factors such as quality of ply, weather conditions, and type of concrete.
The maximum repetition of ply shuttering can range from 5 to 20 times depending on the above factors.
If the quality of ply is good and weather conditions are favorable, the ply shuttering can be reused more number of times.
However, if the concrete mix is harsh or the weather conditions ar...
- Q3. Consumption of shuttering oil per ltr how much area covered
- Ans.
The consumption of shuttering oil per liter depends on the area covered.
The consumption of shuttering oil per liter can vary depending on factors such as the type of shuttering material, surface texture, and weather conditions.
On average, 1 liter of shuttering oil can cover approximately 10-15 square meters of surface area.
However, this can vary significantly based on the absorbency of the surface and the thickness of ...
- Q4. How much elongation % of fe550 steel
- Ans.
The elongation % of fe550 steel varies depending on the specific grade and manufacturing process.
The elongation % of fe550 steel can range from 14% to 20%.
It is important to refer to the specifications provided by the manufacturer for accurate information.
The elongation % indicates the ability of the steel to deform before breaking under tension.
Fe550 steel is commonly used in construction and reinforcement application
- Q5. What the mean of rolling margin of the steel
- Ans.
Rolling margin of steel is the difference between the target thickness and the actual thickness after rolling.
Rolling margin is a measure of the accuracy of the rolling process.
It is calculated by subtracting the actual thickness of the steel after rolling from the target thickness.
A positive rolling margin means the steel is thicker than intended, while a negative rolling margin means it is thinner.
Rolling margin is i...
Interview Preparation Tips
(1 Question)
- Q1. Introduction,goals,Explain your final year project
Interview Preparation Tips
Likhitha Infrastructure Interview FAQs
Tell us how to improve this page.
Likhitha Infrastructure Interviews By Designations
Interview Questions for Popular Designations
- Civil Site Supervisor Interview Questions
- Site Engineer Interview Questions
- Civil Site Engineer Interview Questions
- Electrical Site Engineer Interview Questions
- Senior Site Supervisor Interview Questions
- Site Incharge Interview Questions
- Senior Site Engineer Interview Questions
- Site Engineer Mechanical Interview Questions
- Show more
Likhitha Infrastructure Site Supervisor Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
|
QA QC Engineer
21
salaries
|  ₹3 L/yr - ₹6 L/yr |
|
Accounts Manager
15
salaries
| ₹34 L/yr - ₹37.5 L/yr |
|
Shift Engineer
14
salaries
| ₹2 L/yr - ₹4.1 L/yr |
|
Executive Accountant
10
salaries
| ₹2.2 L/yr - ₹4.5 L/yr |
|
Site Engineer
10
salaries
| ₹1.5 L/yr - ₹4.2 L/yr |
Lea Associates South Asia
McNally Bharat Engineering
R.V.R. PROJECTS
ABCI Infrastructures
- Home >
- Interviews >
- Likhitha Infrastructure Interview Questions >
- Likhitha Infrastructure Site Supervisor Interview Questions
