Upload Button Icon Add office photos

Lakshmi Machine Works

Compare button icon Compare button icon Compare

Filter interviews by

Lakshmi Machine Works Mechanical Engineer Interview Questions and Answers

Updated 1 Mar 2024

Lakshmi Machine Works Mechanical Engineer Interview Experiences

3 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Feb 2024. There were 2 interview rounds.

Round 1 - Aptitude Test 

Production line manufacturing

Round 2 - Technical 

(1 Question)

  • Q1. Knowledge skills

I applied via Company Website and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - Hi sir /madam fist of all, thank you for give me this opportunity to introduce myself. My name is Chokkalingam. I am basically from India . I did my graduation in diploma mechanical engineering. That's all about me. Thanks again for this opportunity.

Mechanical Engineer Interview Questions Asked at Other Companies

Q1. What we need to do if pressure valve fail in boiler
Q2. What are the basic parts of an aeroplane and there working functi ... read more
asked in Tata Steel
Q3. Percentage of carbon presence in cast iron
Q4. How we cool a pipe in a chamber without using coolent
Q5. Why petrol engines comparison ratio low when compared to a diesel ... read more

I applied via Approached by Company and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Mechanical electrical related any interview
  • Q2. My moto G3 phase not working what is the what is issue

Interview Preparation Tips

Interview preparation tips for other job seekers - My company is a very good company engineering work very good motor part break part and fitted work

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected
Round 1 - Technical 

(5 Questions)

  • Q1. Which type of bearing used to axial load?
  • Ans. 

    Thrust bearings are used to axial load in mechanical applications.

    • Thrust bearings are designed to handle axial loads

    • They are commonly used in applications where the load is primarily in the axial direction

    • Examples include ball thrust bearings and roller thrust bearings

  • Answered by AI
  • Q2. Why is used to gear box?
  • Ans. 

    Gear boxes are used to control the speed and torque of a mechanical system by changing the gear ratio.

    • Gear boxes allow for the transmission of power from one component to another at different speeds and torques.

    • They are used to increase or decrease the speed of rotation depending on the application requirements.

    • Gear boxes also provide mechanical advantage by increasing the torque output while reducing the speed of rota...

  • Answered by AI
  • Q3. Which types of pump used by slurry disposal ?
  • Ans. 

    Centrifugal pumps and positive displacement pumps are commonly used for slurry disposal.

    • Centrifugal pumps are often used for transporting large volumes of slurry with low viscosity.

    • Positive displacement pumps are suitable for handling high viscosity slurry or slurry with solid particles.

    • Examples of pumps used for slurry disposal include centrifugal slurry pumps and progressive cavity pumps.

  • Answered by AI
  • Q4. Types of alignments?
  • Ans. 

    Types of alignments include shaft alignment, coupling alignment, and belt alignment.

    • Shaft alignment ensures that the shafts of rotating equipment are properly aligned to prevent vibration and wear.

    • Coupling alignment involves aligning the coupling components to ensure smooth power transmission.

    • Belt alignment ensures that belts are properly aligned on pulleys to prevent slippage and wear.

    • Other types of alignments may inc...

  • Answered by AI
  • Q5. Difference between conving pressure and instrument pressure.
  • Ans. 

    Converting pressure is the process of converting pressure units, while instrument pressure is the pressure measured by an instrument.

    • Converting pressure involves changing the units of pressure, such as from psi to bar or Pa to atm.

    • Instrument pressure is the actual pressure measured by a pressure gauge or sensor.

    • Converting pressure is a mathematical calculation, while instrument pressure is a physical measurement.

    • For ex...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Better knowledge

I applied via Naukri.com and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Boiler startup producer
  • Ans. 

    Boiler startup producer is a device used to ignite the fuel and start the combustion process in a boiler.

    • Boiler startup producer is also known as an ignition system.

    • It is responsible for producing a spark or flame to ignite the fuel.

    • There are different types of startup producers such as pilot lights, electric starters, and oil guns.

    • The type of startup producer used depends on the type of fuel and boiler being used.

    • Prop...

  • Answered by AI
  • Q2. Boiler shutdown producer
  • Q3. What is draft in boiler
  • Ans. 

    Draft in a boiler refers to the flow of air or gases through the combustion chamber and flue gas passages.

    • Draft is created by a difference in pressure between the inside and outside of the boiler.

    • It is necessary for proper combustion and efficient operation of the boiler.

    • There are two types of draft: natural draft and forced draft.

    • Natural draft is created by the buoyancy of hot gases, while forced draft is created by m...

  • Answered by AI
  • Q4. Cooling tower performance
  • Ans. 

    Cooling tower performance is measured by its ability to remove heat from a process stream.

    • Cooling tower performance is affected by factors such as air flow rate, water flow rate, and temperature difference between the process stream and cooling water.

    • The efficiency of a cooling tower can be improved by increasing the surface area of the heat transfer media, using a more efficient fan, or optimizing the water distributi...

  • Answered by AI
  • Q5. Pump lineup and its efficiency
  • Ans. 

    Pump lineup is crucial for efficient operation. Proper selection and maintenance can improve efficiency.

    • Pump lineup should be selected based on the required flow rate and head

    • Centrifugal pumps are commonly used for low viscosity fluids while positive displacement pumps are used for high viscosity fluids

    • Efficiency can be improved by proper maintenance such as regular cleaning and lubrication

    • Variable frequency drives can...

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Thermax Limited Mechanical Engineer interview:
  • Boiler Operations
  • Pumps
  • Cooling Tower
  • Fans
Interview preparation tips for other job seekers - Technical Knowledge must necessary and communication skills
Interview experience
1
Bad
Difficulty level
Hard
Process Duration
More than 8 weeks
Result
Not Selected

I applied via Walk-in and was interviewed before Jul 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Easy but took time questions were direct as well as indirect

Round 2 - Technical 

(2 Questions)

  • Q1. Introduce your self
  • Q2. Showcase your skills

Interview Preparation Tips

Interview preparation tips for other job seekers - prepare yourself and all the best

I applied via Naukri.com and was interviewed in Apr 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. I applied via Recruitment Consultant and was interviewed before sem 2021.
  • Q2. How many Engineering Documents will be process if you handle EPC project?
  • Ans. 

    The number of engineering documents processed in an EPC project depends on the project scope and complexity.

    • The number of engineering documents can range from a few hundred to several thousand.

    • Documents include design drawings, specifications, calculations, reports, and contracts.

    • The project size, type, and location can also impact the number of documents.

    • Efficient document management is crucial for project success and...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be prepared for Interview. Any question can be asked by vessels.

Interview Questionnaire 

4 Questions

  • Q1. Question about vmc oparator or cnc
  • Q2. G code m code
  • Q3. Difference between drilling boaring reaming
  • Ans. 

    Drilling is making a hole using a drill bit, boring is enlarging an existing hole, and reaming is smoothing and finishing a hole.

    • Drilling is the process of making a hole in a material using a drill bit.

    • Boring is the process of enlarging an existing hole using a boring tool.

    • Reaming is the process of smoothing and finishing a hole using a reamer tool.

    • Drilling is typically used for creating holes for screws, bolts, or oth...

  • Answered by AI
  • Q4. Gd&t symbol
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Referral and was interviewed in May 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

GD &T and basic mechanical engineer

Round 3 - HR 

(2 Questions)

  • Q1. Salary negotiation and basic background
  • Q2. Last firm salary discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Fix basic

I applied via Naukri.com and was interviewed in Oct 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. No question

Interview Preparation Tips

Interview preparation tips for other job seekers - Besiclly subject wise questions

Lakshmi Machine Works Interview FAQs

How many rounds are there in Lakshmi Machine Works Mechanical Engineer interview?
Lakshmi Machine Works interview process usually has 2 rounds. The most common rounds in the Lakshmi Machine Works interview process are Resume Shortlist, Technical and HR.
What are the top questions asked in Lakshmi Machine Works Mechanical Engineer interview?

Some of the top questions asked at the Lakshmi Machine Works Mechanical Engineer interview -

  1. My moto G3 phase not working what is the what is is...read more
  2. Mechanical electrical related any interv...read more
  3. Knowledge ski...read more

Tell us how to improve this page.

Lakshmi Machine Works Mechanical Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more
Lakshmi Machine Works Mechanical Engineer Salary
based on 28 salaries
₹2 L/yr - ₹6.2 L/yr
19% less than the average Mechanical Engineer Salary in India
View more details

Lakshmi Machine Works Mechanical Engineer Reviews and Ratings

based on 5 reviews

4.6/5

Rating in categories

4.3

Skill development

4.1

Work-life balance

4.3

Salary

4.6

Job security

4.6

Company culture

4.2

Promotions

4.6

Work satisfaction

Explore 5 Reviews and Ratings
Engineer
250 salaries
unlock blur

₹2.2 L/yr - ₹8 L/yr

Senior Engineer
224 salaries
unlock blur

₹4.7 L/yr - ₹11 L/yr

Assistant Manager
176 salaries
unlock blur

₹5.2 L/yr - ₹14.7 L/yr

Technician
123 salaries
unlock blur

₹2 L/yr - ₹5 L/yr

Design Engineer
106 salaries
unlock blur

₹1.8 L/yr - ₹6.8 L/yr

Explore more salaries
Compare Lakshmi Machine Works with

BHEL

4.1
Compare

Thermax Limited

4.1
Compare

Kirloskar Brothers

3.8
Compare

Voltas

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview