Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by L&T Defence Team. If you also belong to the team, you can get access from here

L&T Defence Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

L&T Defence Production & Testing Engineer Interview Questions and Answers

Updated 20 Jun 2024

L&T Defence Production & Testing Engineer Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Which devices have you used for mri coil production?
  • Ans. 

    I have used devices such as soldering stations, wire strippers, crimping tools, and multimeters for MRI coil production.

    • Soldering stations

    • Wire strippers

    • Crimping tools

    • Multimeters

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I was interviewed before Mar 2024.

Round 1 - Technical 

(3 Questions)

  • Q1. Introduction my self
  • Q2. About my previous work and basic things
  • Q3. Basic talking about my experience and company
Round 2 - HR 

(2 Questions)

  • Q1. Family background and basic things
  • Q2. Salary discussion
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Background history
  • Q2. Chemical engineering knowledge
Round 2 - One-on-one 

(2 Questions)

  • Q1. Tell me about your experience
  • Q2. What is hira and hazop
  • Ans. 

    HIRA stands for Hazard Identification and Risk Assessment, while HAZOP stands for Hazard and Operability Study.

    • HIRA is a systematic process for identifying hazards and assessing risks associated with a particular job or task.

    • HAZOP is a structured and systematic examination of a planned or existing process or operation to identify and evaluate problems that may represent risks to personnel or equipment.

    • Both HIRA and HAZ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Read 5s workplace management and lean management before going for interviews
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. What is your strength
  • Ans. 

    My strength is my ability to problem-solve and think critically under pressure.

    • Strong problem-solving skills

    • Ability to think critically

    • Perform well under pressure

    • Adaptability to changing situations

    • Effective communication skills

  • Answered by AI
  • Q2. What is your weakness
  • Ans. 

    I tend to be overly critical of my own work, which can sometimes lead to perfectionism.

    • I have a tendency to spend too much time on a task to ensure it is perfect

    • I can be overly self-critical and struggle to delegate tasks to others

    • I am working on finding a balance between striving for excellence and accepting good enough

  • Answered by AI

I applied via Naukri.com and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Basic details about ourselves
  • Q2. Tell me about yourself and why is looking for other job
Round 2 - Technical 

(4 Questions)

  • Q1. About work experience
  • Q2. Drawing related questions and case studies
  • Q3. Differnece between straight and reverse polarity,code of electrodes ,first and third angle projections
  • Ans. 

    The question covers topics related to welding and engineering.

    • Straight polarity is used for welding thin metals while reverse polarity is used for thicker metals.

    • Code of electrodes refers to the classification system used to identify different types of welding electrodes.

    • First and third angle projections are two common methods of representing a 3D object on a 2D drawing.

  • Answered by AI
  • Q4. Material compostitions and types of SS material
  • Ans. 

    Stainless steel (SS) is a group of corrosion-resistant alloys. Common types include austenitic, ferritic, and martensitic.

    • SS is composed of iron, carbon, and varying levels of other elements such as chromium, nickel, and molybdenum.

    • Austenitic SS is the most common type and is non-magnetic with high corrosion resistance.

    • Ferritic SS is magnetic and has lower corrosion resistance than austenitic SS.

    • Martensitic SS is magne...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - improve basic knowledge and be clear about your experience knowledge,mostly questions are related about experience ,iam selected and happy ,Interview board members are very decent
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Basic information for electronics and related production
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
No response

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - HR 

(1 Question)

  • Q1. About family background,,

Interview Preparation Tips

Interview preparation tips for other job seekers - Best work place for learn.

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Manpower handling, inventory management
  • Q2. OEE,5S,3C, Quality systems

Interview Preparation Tips

Interview preparation tips for other job seekers - Check out JD and perform accordingly
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected
Round 1 - Group Discussion 

Technical question regarding drawing skills.

Round 2 - Technical 

(1 Question)

  • Q1. Drawing skills kaizen quality

Interview Questionnaire 

3 Questions

  • Q1. Production is bluk explosive.
  • Q2. What's raw materials use..
  • Ans. 

    Raw materials are the basic components used in the production process.

    • Raw materials are transformed into finished products through the production process.

    • Examples of raw materials include wood, steel, plastic, and chemicals.

    • The quality and availability of raw materials can impact production efficiency and cost.

    • Effective management of raw materials is essential for successful production.

  • Answered by AI
  • Q3. My work...

L&T Defence Interview FAQs

How many rounds are there in L&T Defence Production & Testing Engineer interview?
L&T Defence interview process usually has 1 rounds. The most common rounds in the L&T Defence interview process are Technical.

Tell us how to improve this page.

L&T Defence Production & Testing Engineer Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more

Interview Questions from Similar Companies

Indian Army Interview Questions
4.7
 • 148 Interviews
GE Interview Questions
4.2
 • 102 Interviews
AIRBUS Interview Questions
3.7
 • 70 Interviews
Data Patterns Interview Questions
3.7
 • 47 Interviews
View all
Assistant Manager
105 salaries
unlock blur

₹6 L/yr - ₹18 L/yr

Design Engineer
77 salaries
unlock blur

₹1.9 L/yr - ₹6 L/yr

Senior Engineer
72 salaries
unlock blur

₹4 L/yr - ₹10 L/yr

Junior Engineer
54 salaries
unlock blur

₹1.7 L/yr - ₹5.5 L/yr

Junior Supervisor
45 salaries
unlock blur

₹2.8 L/yr - ₹5.3 L/yr

Explore more salaries
Compare L&T Defence with

Bharat Electronics

4.2
Compare

Hindustan Aeronautics

4.3
Compare

Tata Advanced Systems

3.7
Compare

Mahindra Defence Systems

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview