Add office photos
Filter interviews by
KNR Tirumala Infra Junior Engineer Civil Interview Questions, Process, and Tips
KNR Tirumala Infra Junior Engineer Civil Interview Experiences
1 interview found
Anonymous
Selected
I applied via Naukri.com and was interviewed before Oct 2022. There were 3 interview rounds.
(5 Questions)
- Q1. What is the procedure of repairing the pot hole?
- Ans.
The procedure of repairing a pot hole involves cleaning the area, filling it with suitable material, and compacting it properly.
Clean the pot hole by removing any debris or loose material
Fill the pot hole with suitable material such as asphalt or concrete mix
Compact the filled material properly to ensure a strong and durable repair
Seal the edges of the pot hole to prevent water infiltration and further damage
Regular ma...
- Q2. What is the IRC Code of road studs?
- Ans.
IRC Code of road studs specifies the standards for installation and maintenance of road studs on highways.
IRC: Indian Roads Congress
IRC Code provides guidelines for the design, placement, and materials used for road studs
It ensures visibility and safety for drivers, especially during night time
Examples of road studs include reflective studs, solar-powered studs, and ceramic studs
- Q3. What is the thickness of BT and BC laying?
- Ans.
The thickness of BT and BC laying varies depending on the specific project requirements and specifications.
The thickness of BT (Bituminous Concrete) typically ranges from 25mm to 40mm.
The thickness of BC (Brick Concrete) can vary from 75mm to 150mm depending on the load-bearing requirements.
The thickness of BT and BC laying is determined by factors such as traffic load, climate conditions, and project specifications.
- Q4. For Which purpose we use sign board?
- Ans.
Sign boards are used for providing information, directions, warnings, regulations, and advertising.
Provide information to the public
Give directions to specific locations
Warn about potential hazards or dangers
Display regulations or rules
Advertise products or services
- Q5. Different types of sign board and explain it?
- Ans.
Different types of sign boards include regulatory signs, warning signs, guide signs, and informational signs.
Regulatory signs: Signs that give instructions or convey regulations, such as speed limit signs or stop signs.
Warning signs: Signs that warn of potential hazards, such as slippery road signs or deer crossing signs.
Guide signs: Signs that provide information about directions, distances, services, etc., such as ex...
(7 Questions)
- Q1. What do you study?
- Ans.
I study Civil Engineering, focusing on structural design, construction materials, geotechnical engineering, and transportation engineering.
Structural design
Construction materials
Geotechnical engineering
Transportation engineering
- Q2. Where you will working?
- Q3. What is your privious company?
- Q4. What is your designation?
- Q5. How many years do you have experience?
- Q6. How much salary is expecting you?
- Q7. Share your personal details?
Interview Preparation Tips
- Civil Engineering
- Communication Skills
Top trending discussions
Interview questions from similar companies
I applied via Company Website and was interviewed in Sep 2022. There were 5 interview rounds.
(2 Questions)
- Q1. Aim of interesting places
- Ans.
The aim of interesting places is to attract visitors and provide them with unique experiences.
Interesting places can be natural wonders, historical sites, cultural landmarks, or modern attractions.
They offer opportunities for education, entertainment, and relaxation.
Examples include the Grand Canyon, the Eiffel Tower, the Taj Mahal, and Disneyland.
Interesting places can also boost local economies by creating jobs and g...
- Q2. Level up to earning in kochi
AutoCAD civil engineering design
Parking space, safety and facilities
(3 Questions)
- Q1. Sharing your experience
- Q2. Difference for manageable and not manageable
- Ans.
Manageable refers to something that can be controlled or handled easily, while not manageable refers to something that is difficult or impossible to control or handle.
Manageable tasks can be completed within a given timeframe and with available resources.
Not manageable tasks require additional resources, time, or expertise to be completed.
Manageable situations can be resolved with minimal effort or intervention.
Not man...
- Q3. Tell me about your successful things
Interview Preparation Tips
- Waste Water Treatment
I applied via Walk-in and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Subject wise interview
- Q2. Degree of saturation. Density.
- Ans.
Degree of saturation and density are important parameters in civil engineering.
Degree of saturation is the ratio of the volume of water to the volume of voids in a soil sample.
It is expressed as a percentage and is important in determining the soil's shear strength and compressibility.
Density is the mass per unit volume of a substance.
In civil engineering, density is important in determining the weight and volume of ma...
Interview Preparation Tips
I applied via Recruitment Consultant and was interviewed in Dec 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. My strength my short term goal and long term goal
- Q2. My weakness and why you need the job
- Q3. How much you accepted payment in per months
- Ans.
I cannot disclose my expected salary as it is confidential.
I prefer to discuss salary expectations during the negotiation phase
My salary expectations are based on my experience and the industry standards
I am open to discussing compensation packages that align with my skills and experience
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Jan 2024. There were 3 interview rounds.
(3 Questions)
- Q1. Civil engineering
- Q2. The technical questions
- Q3. The technical questions and python in CSS
(2 Questions)
- Q1. We are civil in question
- Q2. Cement concrete
(3 Questions)
- Q1. G IS and GPS
- Q2. Quality engineer
- Q3. The technical and non technical questions
Interview Preparation Tips
I applied via Job Fair and was interviewed in Nov 2023. There were 2 interview rounds.
In general, aptitude tests measure ones competence in logical reasoning, numerical skills, or verbal ability.
(5 Questions)
- Q1. What is the technical in my site ?
- Q2. What about this company ?
- Q3. What about my empolys ?
- Q4. In many cases what will be approch in this technical issus ?
- Ans.
The approach to technical issues in civil engineering often involves analyzing the problem, considering various solutions, and selecting the most feasible option.
Identify the technical issue and its impact on the project
Analyze the possible solutions and their pros and cons
Consider factors such as cost, time, and resources
Consult with team members or experts for input
Select the most feasible solution and implement it
Mo
- Q5. What is the technical ?
Interview Preparation Tips
veeresh katnoorl
(1 Question)
- Q1. What are various quality control tests for concrete.
- Ans.
Various quality control tests for concrete include slump test, compressive strength test, water absorption test, and air content test.
Slump test measures the consistency and workability of concrete.
Compressive strength test determines the strength of concrete by applying a compressive force.
Water absorption test assesses the porosity of concrete.
Air content test measures the amount of air trapped in concrete to ensure ...
I applied via Naukri.com
(3 Questions)
- Q1. What is cement grade?
- Ans.
Cement grade refers to the strength and quality of cement used in construction.
Cement grade is determined by the compressive strength of cement mortar cubes after 28 days of curing.
The most commonly used cement grades are 33, 43, and 53, indicating their respective compressive strengths in megapascals (MPa).
Higher cement grades are used for structures that require higher strength, such as bridges and high-rise building...
- Q2. Opc 33, 43, 53 grads.
- Q3. The standard size of a concrete cube is 15 cm × 15 cm × 15 cm
- Ans.
Yes, the standard size of a concrete cube is 15 cm × 15 cm × 15 cm.
The standard size of a concrete cube is used for testing the compressive strength of concrete.
The cubes are casted and cured for 28 days before testing.
The cubes are tested using a compression testing machine.
The compressive strength of concrete is calculated by dividing the maximum load applied to the cube by the cross-sectional area of the cube.
Interview Preparation Tips
I applied via Company Website and was interviewed in Sep 2022. There were 2 interview rounds.
(2 Questions)
- Q1. What is the curing on site engineering
- Ans.
Curing is the process of maintaining moisture and temperature conditions for freshly placed concrete to promote its hydration and strength gain.
Curing is essential for the strength and durability of concrete.
It involves keeping the concrete moist and at a proper temperature for a specific period of time.
Curing can be done using various methods such as water curing, membrane curing, and steam curing.
The duration of curi...
- Q2. What is the strength of cement
- Ans.
The strength of cement depends on its grade and type.
The strength of cement is measured in terms of compressive strength.
The grade of cement determines its strength. Higher the grade, higher the strength.
Type of cement also affects its strength. For example, Portland cement has higher strength than lime cement.
The strength of cement is also influenced by factors such as curing time, temperature, and humidity.
Interview Preparation Tips
a capability to do a job
I applied via Approached by Company and was interviewed in May 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Related to site. What is work of site engineer & why we should select the civil site or etc.
- Q2. How can you grow our company status.
Interview Preparation Tips
KNR Tirumala Infra Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Civil Site Engineer Interview Questions
- Civil Engineer Interview Questions
- Senior Civil Engineer Interview Questions
- Civil Foreman Interview Questions
- Civil Supervisor Interview Questions
- Project Engineer - Civil Interview Questions
- Assistant Engineer - Civil Interview Questions
- Project Manager Civil Interview Questions
- Show more
People are getting interviews through
Junior Engineer Civil Interview Questions from Similar Companies
KNR Tirumala Infra Junior Engineer Civil Reviews and Ratings
based on 1 review
Rating in categories
|
Junior Engineer Civil
3
salaries
|  ₹3.3 L/yr - ₹5.7 L/yr |
TCS
Accenture
Cognizant
Infosys
Calculate your in-hand salary
- Home >
- Interviews >
- KNR Tirumala Infra Interview Questions >
- KNR Tirumala Infra Junior Engineer Civil Interview Questions
