Upload Button Icon Add office photos

Filter interviews by

Kalpataru Projects International QC Engineer Interview Questions and Answers

Updated 14 Apr 2023

Kalpataru Projects International QC Engineer Interview Experiences

2 interviews found

QC Engineer Interview Questions & Answers

user image Anonymous

posted on 14 Apr 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. 1. What is Concrete Mix Design?
  • Ans. 

    Concrete mix design is the process of determining the proportions of cement, water, aggregates, and admixtures to produce concrete with desired properties.

    • Concrete mix design involves selecting the appropriate materials and determining their proportions to achieve the desired strength, workability, and durability of the concrete.

    • Factors such as the type of cement, aggregate gradation, water-cement ratio, and admixtures...

  • Answered by AI
  • Q2. What is the maximum Liquid Limit & Plasticity Index allowed in earth work in embankment/subgrade soil ?
  • Ans. 

    Liquid limit should not exceed 40% and Plasticity Index should not exceed 20% for earth work in embankment/subgrade soil.

    • Liquid limit and Plasticity Index are important parameters to determine the suitability of soil for construction purposes.

    • Higher values of Liquid limit and Plasticity Index indicate that the soil is more susceptible to deformation and settlement.

    • For earth work in embankment/subgrade soil, the maximum...

  • Answered by AI

QC Engineer Interview Questions & Answers

user image Anonymous

posted on 24 Jul 2021

I applied via Naukri.com and was interviewed in Jun 2021. There were 3 interview rounds.

Interview Questionnaire 

6 Questions

  • Q1. QC related questions asked me and site knowledge..
  • Q2. Soil testing... For Exa:- FSI, GSA, MDD, LL/PL, CBR testing, FDD testing, & Direct shear Test etc
  • Q3. Aggregate testing:- Gradation testing, FI/EI testing, AIV, LAAV, Water Absorption, etc...
  • Q4. Concrete testing:- Workability,Tempreature, Cube testing, etc..
  • Q5. Cement testing:- Fineness, Consistency, Initial & Final setting time, Compressive strength, Soundness test, Heat of Hydration etc....
  • Q6. Sand testing:- Fines, silt & clay checking

Interview Preparation Tips

Interview preparation tips for other job seekers - Please take my Telephonic Interview dear sir...I requested to you

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Soil & concrete
  • Q2. What is the 20mm nominal size
  • Ans. 

    The 20mm nominal size refers to the designated size of a component or object.

    • Nominal size is a standard size used for identification and classification purposes.

    • In this case, the 20mm nominal size indicates that the component or object is intended to have a size of 20mm.

    • It is important to note that the actual size may vary slightly due to manufacturing tolerances.

    • The nominal size helps in ensuring compatibility and int...

  • Answered by AI

Interview Questionnaire 

1 Question

  • Q1. WHAT YOU WILL DO , IF YOU GET BATTER OPPORTUNITY THAN OUR COMPANY AFTER JOINING OUR COMPANY.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via campus placement at Jawaharlal Nehru Technological University (JNTU) and was interviewed in Dec 2024. There was 1 interview round.

Round 1 - Group Discussion 

GD topic was "pros and cons of strat ups"
Everty member who gave GD was eligible for interview
They gave marks for every candidate

Interview Preparation Tips

Interview preparation tips for other job seekers - There we 32 chemical engineering students to be interviewed.
It was pool campus interview in hyderabad at jntuh College.
GD was done in 10 members group
The topic was "pros and cons of start ups"
Then interview....
For first 6 members they asked questions on FM (even if we said our favorite subjects which didn't include FM,they asked questions from it.)
The questions were:
What is npsh
What is cavitation
What happens if vapor pressure decreases in pumps
How much should be the minimum vapor pressure....any formulae
Functions used in FM
Suction head formula and their types
Formulae used in FM
Bernoulli's theory
Questions based on minor and major project(remember the formulae used in projects)
In thermodynamics and HT
Modes of heat transfer
How do you relate enthalpy and entropy and efficiency of pump( questions on minor project)

For last 4 members they asked most questions from CRE(they got bored from asking same FM questions)
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Oct 2024. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Motor type, Pump lowering, ESR piping etc.
  • Q2. Solar Specification
Round 2 - HR 

(2 Questions)

  • Q1. Notice period is negotiable
  • Q2. 30%hike on current ctc

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep calm, to be honest if you know about whats they ask explain them if not then leave and say sorry.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

C6h12o6 what's this is

Round 2 - Technical 

(2 Questions)

  • Q1. Root 3 what is this
  • Q2. 66 conversation for Roman number
Round 3 - Technical 

(2 Questions)

  • Q1. Auxin what is theis
  • Ans. 

    Auxin is a plant hormone that regulates growth and development.

    • Auxin is responsible for cell elongation and division in plants.

    • It plays a role in phototropism, gravitropism, and apical dominance.

    • Examples of auxin include indole-3-acetic acid (IAA) and synthetic auxins like 2,4-D.

  • Answered by AI
  • Q2. Iaa what is this

Interview Preparation Tips

Interview preparation tips for other job seekers - Hi
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(22 Questions)

  • Q1. Service and brekdown
  • Q2. Oil, service and P D A
  • Q3. Excavator and hydrulic
  • Q4. Service and maintenance
  • Q5. How guide for customer, and how problems solved
  • Ans. 

    I guide customers through troubleshooting steps and work with them to solve technical problems efficiently.

    • Listen to the customer's issue and ask clarifying questions to understand the problem

    • Provide clear instructions and guidance on troubleshooting steps

    • Demonstrate patience and empathy while working with the customer

    • Offer alternative solutions if initial troubleshooting steps do not resolve the issue

    • Follow up with th...

  • Answered by AI
  • Q6. Communication skills
  • Q7. And teamwork is most important
  • Q8. I lerned more more experience
  • Q9. How growth the marketing
  • Ans. 

    Marketing growth can be achieved through various strategies such as digital marketing, social media campaigns, partnerships, and targeted advertising.

    • Utilize digital marketing channels such as SEO, SEM, and email marketing to reach a wider audience

    • Create engaging social media campaigns to increase brand awareness and attract new customers

    • Form partnerships with complementary businesses to expand reach and access new mar...

  • Answered by AI
  • Q10. I have more improve for my self
  • Q11. Create a more new things
  • Q12. All or equalitys
  • Q13. Going on good things
  • Q14. Good relationship or stuffs and customer
  • Q15. I lerned the more knowledge
  • Q16. Target the goals
  • Q17. Displane the work and
  • Q18. Efforts for work
  • Q19. Managing the all problms
  • Q20. Work is my passion
  • Q21. All employees my family
  • Q22. This is my passion and profession

Interview Preparation Tips

Interview preparation tips for other job seekers - Hydrulic pump, track motor,swing motor,speedmeter dumping controls,
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Technical Aptitude on java , .net , and sql

Round 2 - Group Discussion 

Generative Al . time was 8 minutes and 2 minutes for thinking

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I was interviewed in Apr 2024.

Round 1 - One-on-one 

(2 Questions)

  • Q1. What are doing in metro project
  • Ans. 

    I am responsible for ensuring quality control and quality assurance in the construction of the metro project.

    • Conducting inspections and tests on materials used in construction

    • Ensuring compliance with project specifications and standards

    • Identifying and resolving any quality issues that may arise

    • Collaborating with project managers and contractors to maintain quality standards

  • Answered by AI
  • Q2. You know about pre casting
  • Ans. 

    Pre casting is a construction method where concrete elements are cast in a different location before being transported to the construction site.

    • Pre casting helps in ensuring quality control and reducing construction time on site.

    • Examples include precast concrete panels, beams, and columns.

    • It allows for better planning and coordination of construction activities.

  • Answered by AI

Kalpataru Projects International Interview FAQs

How many rounds are there in Kalpataru Projects International QC Engineer interview?
Kalpataru Projects International interview process usually has 2 rounds. The most common rounds in the Kalpataru Projects International interview process are Resume Shortlist and Technical.
What are the top questions asked in Kalpataru Projects International QC Engineer interview?

Some of the top questions asked at the Kalpataru Projects International QC Engineer interview -

  1. What is the maximum Liquid Limit & Plasticity Index allowed in earth work in em...read more
  2. 1. What is Concrete Mix Desi...read more
  3. Cement testing:- Fineness, Consistency, Initial & Final setting time, Compressi...read more

Tell us how to improve this page.

People are getting interviews through

based on 1 Kalpataru Projects International interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

L&T Construction Interview Questions
4.0
 • 686 Interviews
Siemens Interview Questions
4.1
 • 418 Interviews
Tata Projects Interview Questions
4.3
 • 397 Interviews
KEC International Interview Questions
4.1
 • 286 Interviews
Tata Technologies Interview Questions
3.7
 • 246 Interviews
ABB Interview Questions
4.1
 • 224 Interviews
Saint-Gobain Interview Questions
4.0
 • 167 Interviews
View all
Kalpataru Projects International QC Engineer Salary
based on 16 salaries
₹3 L/yr - ₹6.2 L/yr
At par with the average QC Engineer Salary in India
View more details

Kalpataru Projects International QC Engineer Reviews and Ratings

based on 9 reviews

3.7/5

Rating in categories

3.4

Skill development

3.8

Work-Life balance

3.5

Salary & Benefits

3.3

Job Security

3.7

Company culture

2.9

Promotions/Appraisal

3.7

Work Satisfaction

Explore 9 Reviews and Ratings
Senior Engineer
611 salaries
unlock blur

₹3.4 L/yr - ₹10.6 L/yr

Deputy Manager
592 salaries
unlock blur

₹5.4 L/yr - ₹19.5 L/yr

Assistant Manager
508 salaries
unlock blur

₹5 L/yr - ₹14.8 L/yr

Manager
279 salaries
unlock blur

₹6.2 L/yr - ₹24 L/yr

Civil Engineer
247 salaries
unlock blur

₹2 L/yr - ₹8.7 L/yr

Explore more salaries
Compare Kalpataru Projects International with

Sterlite Power

4.0
Compare

Adani Transmission

3.8
Compare

Power Grid Corporation of India

4.4
Compare

Tata Power

4.0
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview