Upload Button Icon Add office photos

Filter interviews by

Kalkitech Engineer Interview Questions and Answers

Updated 10 May 2023

Kalkitech Engineer Interview Experiences

2 interviews found

Engineer Interview Questions & Answers

user image Anonymous

posted on 10 May 2023

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-

I applied via Campus Placement

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Aptitude Test 

Basic Aptitude Test,Reasoning,Maths

Round 3 - Technical 

(1 Question)

  • Q1. Thermal Power Plant Basics

Engineer Interview Questions & Answers

user image Anonymous

posted on 22 Apr 2023

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Aptitude Test 

Asked basic mechanic engineering questions like Rankine cycle

Round 3 - One-on-one 

(1 Question)

  • Q1. Algorithm for making tea
  • Ans. 

    Boil water, add tea leaves, steep for desired time, strain and serve with milk and sugar.

    • Boil water in a kettle or pot

    • Add tea leaves to a teapot or infuser

    • Pour hot water over tea leaves and steep for desired time

    • Strain tea into a cup and add milk and sugar to taste

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Be familiar with the working of power plants

Engineer Interview Questions Asked at Other Companies

asked in Eaton
Q1. ❖ If a team member is unable to carry out his work, he is doing i ... read more
Q2. What is inheritance? Show me by a code that shouldn't be a pseudo ... read more
asked in Qualcomm
Q3. What is Min-Cut placement algorithm? Given some block sizes, use ... read more
Q4. What is neutonian fluid ? , Stages of fracture, working of engine ... read more
Q5. What is normalization? What do you mean by 1NF, 2NF, 3NF, 4NF?

Interview questions from similar companies

Interview Questionnaire 

2 Questions

  • Q1. 1.About Clear Cover....?
  • Q2. 2. Checking point in Beam and Column....?
  • Ans. 

    Checking points in beam and column are critical for ensuring structural integrity.

    • Checking for cracks or deformations

    • Ensuring proper alignment and levelness

    • Verifying adequate reinforcement

    • Checking for proper bearing and connection details

    • Using non-destructive testing methods

    • Following applicable codes and standards

  • Answered by AI

I applied via PLACEMENT

Interview Preparation Tips

Round: Technical Interview
Experience: Good detailed interview in terms of technical knowledge
Tips: Should be thorough with the projects you have done during the course

General Tips: be confident of what you put in your resume
Technical knowledge regarding projects undertaken during engineering should be sound
Be confident
Skills: Communication, Thinking capability, knowledge applying capability
College Name: V.E.S Institute Of Technology
Motivation: Opportunity to work in a renowned and core technical company
Funny Moments: We consider the interview panelists to be as tough as our viva externals. Interviewers are mostly on your side(contrary to viva professors :P)

I was interviewed before Sep 2016.

Interview Questionnaire 

1 Question

  • Q1. Ocampo, basic electronics and C

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 50

Skills: Embedded Systems, C Programming
College Name: Sahyadri college of engineering

Interview Questionnaire 

5 Questions

  • Q1. Pertaining to the mentioned roles and responsibilities in your resume
  • Q2. Planning and work order creation
  • Q3. Piling activities
  • Q4. Introduction
  • Q5. Cross checking of documents

Interview Preparation Tips

Round: Resume Shortlist
Experience: On the criteria that I scored atleast 60% overall and had no gap between job/s.

Interview Questionnaire 

3 Questions

  • Q1. What is android architecture stack?
  • Ans. 

    Android architecture stack is a set of layers that make up the Android operating system.

    • The stack includes four main layers: Linux kernel, native libraries, Android runtime, and application framework.

    • The Linux kernel provides low-level system functionality.

    • Native libraries are written in C or C++ and provide access to hardware-specific features.

    • The Android runtime includes the Dalvik virtual machine and core libraries.

    • ...

  • Answered by AI
  • Q2. What is AIDL?
  • Ans. 

    AIDL stands for Android Interface Definition Language, used for inter-process communication in Android.

    • AIDL is used to define the interface between client and service in Android.

    • It allows communication between different processes in Android.

    • AIDL is used to pass complex data types between processes.

    • AIDL is similar to Remote Procedure Call (RPC) in other programming languages.

    • Example: AIDL is used in Android to implement...

  • Answered by AI
  • Q3. What is hash set and hash map
  • Ans. 

    Hash set and hash map are data structures used to store key-value pairs for efficient retrieval.

    • Hash set stores unique values without any specific order.

    • Hash map stores key-value pairs and allows fast retrieval of values based on keys.

    • Both use hashing to map keys to their corresponding values.

    • In Java, HashSet and HashMap are implementations of these data structures.

  • Answered by AI

Skills evaluated in this interview

I applied via Naukri.com and was interviewed in May 2021. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Major questions on my past work responsibilities and projects, stlc, defect life cycle, tools used, test case writing, techniques, test plan, agile methodologies

Interview Preparation Tips

Interview preparation tips for other job seekers - Web interview on Aug 2021
Got interview through recruitment consultancy from naukri

Interview Questionnaire 

5 Questions

  • Q1. Questions about flight mechanics and dynamics and controls
  • Q2. Questions about mechanical engineering
  • Q3. Questions on the thesis one has worked on and various projects and internships
  • Q4. Questions based on practical situations
  • Q5. Questions on basics of material, fundamentals of continuum mechanics, thermal science, parts of engine structure, etc

Interview Preparation Tips

Round: Resume Shortlist
Experience: I was guided by placement office quite appreciably for preparation of resume. First by one to one interaction and second by suggesting to talk to the seniors who are either injob or are hereafter the job. As it is always suggested about resume that, it reflects you in brief, you have to get it as good as you can. I followed the guidelines, made the first draft, got it corrected from some of my friends who are working in industries and got feedbacks from students who have experience from industries.

Round: APTITUDE TEST
Experience: It was intimated as aptitude but it included Verbal, Quants and basics of programmingand data structures & algorithm.

Round: Technical Interview
Experience: I went through two technical rounds and both of these included questions starting from the very basics of materials to the continuum mechanics’ fundamentals and applications. In the first round I was asked about flight mechanics & dynamics and controls’ by giving several conditions of practical importance, some part of engine structures and thermal science, my earlier projects and questions on that, some questions from the internship’s work and M.Tech thesis work. Very fundamental as well as complex questions were asked while explaining about the projects and thesis work. For the second round, I was sent to the panel interviewing for mechanical students and there I was asked questions from various subjects as well as for various conditions given on spot. Including both the technical interviews, I was asked questions from around 9-10 subjects of mechanical engineering. Apart from the questions from the course work, half of the interview was focused on the projects that I did earlier. I was asked to explain about the projects and give good insights of my contributions in that and accordingly I was asked questions from that as well. Later part of the technical round was focused for my thesis work. They started asking about the motivation behind the topic of the thesis and the technical platform set so far for the same. Concluding questions were from the company’s work and how I would be able to relate my expertise and thesis work for their benefit.. In the morning, Honeywell started it’s processing at around 6.30 am and I went for the first technical round at around 7 am. After some basic questions from the resume I was asked about the flight mech & controls. After sometimes the interviewer told me about his background, which was avionics and then he started from that. It must have gone over around 45 minutes. Second round of Honeywell was gruelling and I felt little uncomfortable at some points.

Round: HR Interview
Experience: HR round was more or less usual. Description about me and weaknesses in professional life were asked. The tricky one was one particular question about joining Honeywell and at the end of my answer, I was asked to compare Honeywell and the stalwarts of aerospace industry on my answer’s ground.

General Tips: Since I was looking only for the core aerospace companies, I was not looking very much about the aptitude and GD (specially, GD was not required). I was focusing about the technical side of the preparation, coursework, projects that I have done earlier and thesis work. I used the material provided by SPO for preparing the aptitude test solved some CAT papers and some online resources were useful. Further, I referred some core course works, specifically, thermal, fluid, aerodynamics, propulsion, structures & materials, materials & metallurgy and flight mechanics & dynamics for technical interviews. 



Revise the course works, some part of the projects, be focused for profiles and prepare accordingly. Prior knowledge about companies work and the profile helps a lot. Sound knowledge of thesis work, approach and the applications, motivation behind the topic and the work completed till the placement season starts should clearly be checked. If you are not good at programming and DS & algo then revise the basics of these(helps for aptitude). Be mentally prepared for multiple rounds of technical interviews. Shape yourself according to the profile and surf through the company’s site beforehand. Get some suggestions and feedback from seniors(specifically, M.tech students should talk to seniors, fellow students and labmates who have been in industries) for technical interviews. Focus on your approach towards the problem for the worst case. During technical interview, don’t try to brag about the topic that you are not sure about. They sometimes want to test your approach and attitude for the problem given to you (which will be out of your comfort zone) rather than the accuracy of the answer. Since verbal was also the part of aptitude, don’t forget to look that during your preparation. Final Tips : Don’t lose hope and be focused for the profile that you are interested in and narrow down the companies accordingly. It’s all your attitude, past experience (both academics and professional) and preparation for the placements that will help you to nail it. 1st, 2nd or any other day or any other company (as long asthe profile matches with your interest) don’t matter much. At the end of the day, getting in the core-profile is what matters most (if you are interested incore alone) and if it is your preferred company then it’s a boon. Have faith in yourself and believe in the next option if you don’t get the first one.
College Name: IIT KANPUR
Motivation: Other companies that I was shortlisted for : GE, Rolls-Royce, Airbus. Analysis of available options (based on profile, growth, compensation, BrandName, etc) :As for the first day, GE didn’t seem inclined in taking Aerospace Engineering students and I was not looking for Rolls-Royce very interestingly. I was mainly focusing on Honeywell, Eaton and Airbus and was shortlisted to interview with these three. Because of Honeywell’s versatility and the involvement in R&D(as I got the feedback from people working in there), I was focusing mainly on Honeywell. And it was very much favourable from compensation point of view as well. Finally I was selected in both Honeywell and Eaton, and chose Honeywell.

Interview Questionnaire 

5 Questions

  • Q1. Questions on Fluid Mechanics, Thermodynamics, Turbo-machinery etc
  • Q2. Why would you like to join the company ?
  • Ans. 

    I am excited to join the company because of its reputation for innovation and commitment to excellence.

    • I am impressed by the company's track record of developing cutting-edge technology.

    • I am drawn to the company's culture of collaboration and teamwork.

    • I am excited about the opportunity to work with a talented and experienced team of engineers.

    • I believe that the company's focus on quality and customer satisfaction align...

  • Answered by AI
  • Q3. Where do you see yourself 10 years afterwards ?
  • Ans. 

    In 10 years, I see myself as a highly experienced engineer leading a team of talented individuals towards innovative solutions.

    • Leading a team of engineers towards successful project completion

    • Continuing to learn and stay up-to-date with new technologies

    • Mentoring and guiding junior engineers

    • Contributing to the growth and success of the company

    • Exploring opportunities for professional development and growth

  • Answered by AI
  • Q4. Failures and successes during your careeer
  • Ans. 

    I have had both failures and successes in my career as a Senior Engineer.

    • One of my biggest successes was leading a team that developed a new software system that increased efficiency by 50%.

    • I also had a failure when I underestimated the complexity of a project and it ended up being delayed by several months.

    • Another success was implementing a new process that reduced errors by 75%.

    • I learned from a failure when I didn't ...

  • Answered by AI
  • Q5. Questions on resume

Interview Preparation Tips

Round: Test
Experience: The test included General quantitative and logical reasoning, verbal reasoning, questions on basic topics of Mechanical Engineering like Thermodynamics, Mechanics of Solids, Energy Systems, Manufacturing etc.


Round: Technical Interview
Experience: Advanced questions on the topic of your interest specifically related to Aerospace and Mechanical Engineering like Fluid Mechanics, Thermodynamics, Turbo-machinery etc, questions like what do you know about the company.

General Tips: Always follow your interest while choosing a suitable job. If you are not sure about your interest, keep options open and try to get information on all those options and select accordingly. Never run after money only. One must prioritize his/her interests first, then the kind of work in the company and then the package.
Prepare for the technical profiles by studying core subjects which interests you the most, but a person needs to have basic knowledge of other topics related to your department also.

Apply for the company only after gaining sufficient knowledge about it. Identify your interest and what kind of work you like, then apply to the company which suits your style of working and is apt for you to pursue your interests. One must not apply to all the companies just because everyone is applying. One must judge whether he/she is capable for that job or not and then decide in which companies to apply.
Try to be confident with your answers and give genuine replies in HR interviews. One must not give vague answers and change views as this would clearly give the indication that you are not able to give clear answers or you are making them up.
College Name: IIT Kanpur

Kalkitech Interview FAQs

How many rounds are there in Kalkitech Engineer interview?
Kalkitech interview process usually has 3 rounds. The most common rounds in the Kalkitech interview process are Resume Shortlist, Aptitude Test and One-on-one Round.
What are the top questions asked in Kalkitech Engineer interview?

Some of the top questions asked at the Kalkitech Engineer interview -

  1. Algorithm for making ...read more
  2. Thermal Power Plant Bas...read more

Tell us how to improve this page.

Kalkitech Engineer Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.5k Interviews
Siemens Interview Questions
4.1
 • 431 Interviews
ABB Interview Questions
4.1
 • 232 Interviews
BHEL Interview Questions
4.1
 • 109 Interviews
View all

Kalkitech Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

3.0

Skill development

3.0

Work-life balance

3.0

Salary

3.0

Job security

3.0

Company culture

3.0

Promotions

2.0

Work satisfaction

Explore 1 Review and Rating
Project Engineer
7 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Software Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Software Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Lead
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Kalkitech with

Schneider Electric

4.1
Compare

Siemens

4.1
Compare

ABB

4.1
Compare

Honeywell Automation

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview