Filter interviews by
I applied via Company Website and was interviewed in Jul 2021. There were 3 interview rounds.
Koomey unit is a hydraulic accumulator system used to provide high-pressure fluid for well control operations.
Koomey unit is also known as a BOP control unit.
It consists of hydraulic pumps, accumulators, and control valves.
The unit is used to operate the blowout preventer (BOP) stack during drilling operations.
It can also be used to close the BOP in case of an emergency.
The system is designed to maintain pressure even ...
Top trending discussions
In case of an emergency, I would remain calm, assess the situation, and take appropriate action to ensure the safety of all individuals involved.
Remain calm and assess the situation quickly
Follow emergency protocols and procedures
Ensure the safety of all individuals involved
Contact emergency services if necessary
Provide first aid or medical assistance if trained to do so
posted on 17 Jul 2024
The automobile industry is a sector that designs, manufactures, and sells motor vehicles, including cars, trucks, and motorcycles.
Involves the production of vehicles such as cars, trucks, and motorcycles
Includes designing, manufacturing, and selling of motor vehicles
Incorporates various components like engines, chassis, and electrical systems
Involves research and development for innovation and improvement
Global industr...
Maintaining commercial vehicles involves regular inspections, servicing, and repairs to ensure optimal performance and safety.
Perform regular inspections of the vehicle's engine, brakes, tires, and other critical components.
Follow manufacturer's recommended maintenance schedule for oil changes, filter replacements, and other routine tasks.
Address any issues or malfunctions promptly to prevent further damage and ensure ...
An internal combustion engine is a type of engine that generates power by burning fuel inside the engine itself.
Uses combustion of fuel within the engine to generate power
Commonly used in vehicles such as cars, motorcycles, and trucks
Consists of cylinders, pistons, spark plugs, and a fuel delivery system
Two main types are gasoline and diesel engines
Internal combustion engines work by burning fuel inside a combustion chamber to create controlled explosions that drive pistons and generate mechanical power.
Fuel and air mixture is ignited inside the combustion chamber
The resulting explosion pushes the piston down, converting the energy into mechanical motion
The piston is connected to a crankshaft, which converts the linear motion into rotational motion
The rotational ...
posted on 1 Aug 2024
I have experience working on projects involving welding and applying GD&T principles.
Completed a project where I designed and welded a steel frame for a small vehicle
Utilized GD&T principles to ensure precise measurements and tolerances in a project involving machining parts for an assembly line
Familiar with interpreting engineering drawings and applying GD&T symbols accurately
I applied via Company Website and was interviewed before Jul 2023. There were 2 interview rounds.
My GD topic was Renewable Energy
posted on 13 Oct 2023
I applied via Job Fair
posted on 28 Apr 2022
I applied via Walk-in and was interviewed in Oct 2021. There were 8 interview rounds.
My behaviour, and responsibility
Speech and knowlege
Shereing of the obverse
My prossnal job
Work permit and equipment details with jobsop
posted on 24 Mar 2022
I applied via Naukri.com and was interviewed before Mar 2021. There were 2 interview rounds.
posted on 3 Jun 2022
I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 6 interview rounds.
Nitrogen gas is commonly used for hot/live tapping in mechanical engineering.
Nitrogen gas is inert and non-reactive, making it safe to use in hot/live tapping processes.
It helps to create a protective atmosphere to prevent explosions or fires.
Nitrogen gas is readily available and cost-effective.
Other gases like argon or carbon dioxide can also be used depending on the specific requirements.
Various methods can be used for railway/road/river crossings depending on the location and other factors.
Bridges can be built over the crossing
Tunnels can be dug under the crossing
Level crossings can be used for roads
Flyovers can be constructed for roads
Ferries can be used for river crossings
Aqueducts can be built for waterways
Location, traffic volume, and safety considerations must be taken into account when choosing
The procedure for pipe lines welding while route and filling involves several steps.
Clean the area to be welded thoroughly
Tack weld the pipes together
Weld the root pass
Fill the remaining gap with weld metal
Perform post-weld heat treatment if required
Inspect the weld for defects
RT, UT, and magnetic partials are non-destructive testing methods used in engineering.
RT stands for Radiographic Testing and uses X-rays or gamma rays to inspect the internal structure of a material.
UT stands for Ultrasonic Testing and uses high-frequency sound waves to detect flaws or defects in a material.
Magnetic particle testing uses magnetic fields and iron particles to detect surface and slightly subsurface defec...
What IS API 5L
What is ASME B 16.5
What is ASME IX
Whatbis ASME B 31.4
I applied via Company Website and was interviewed in Feb 2023. There were 3 interview rounds.
Digital Education taking over traditional education
I am a Senior Engineer Mechanical with a structured daily routine.
I start my day by reviewing emails and prioritizing tasks.
I attend team meetings to discuss project progress and address any issues.
I spend a significant amount of time designing and analyzing mechanical systems.
I collaborate with cross-functional teams to ensure project milestones are met.
I regularly communicate with clients to understand their requirem...
Material science is the study of the properties and behavior of materials.
It involves the study of the structure, properties, and performance of materials.
It encompasses a wide range of materials including metals, ceramics, polymers, and composites.
Material scientists use various techniques to analyze and manipulate materials, such as microscopy, spectroscopy, and mechanical testing.
The field of material science has ma...
Eutectic point is the temperature at which a eutectic mixture solidifies or melts at a constant temperature.
Eutectic point is the lowest possible melting point of a mixture of two or more substances.
It is a specific composition of a mixture where the melting point is at its lowest.
At the eutectic point, the mixture solidifies or melts at a constant temperature.
Examples of eutectic mixtures include solder, alloys, and c
Eutectoid point is the temperature at which a eutectoid reaction occurs.
Eutectoid point is a specific temperature at which a solid solution transforms into two or more different solid phases.
It is a characteristic property of alloys.
For example, the eutectoid point of steel is 727°C, at which austenite transforms into pearlite.
Eutectoid point is important in the heat treatment of metals and alloys.
Pearlite is a lamellar mixture of ferrite and cementite formed during slow cooling of austenite.
Pearlite is a microstructure commonly found in steels.
It is formed during the eutectoid reaction when austenite transforms into ferrite and cementite.
It has a layered structure which gives it good ductility.
Pearlite is not a separate phase but a mixture of two phases - ferrite and cementite.
It is commonly used in the manufac...
based on 1 review
Rating in categories
HSE Officer
24
salaries
| ₹2.4 L/yr - ₹8.9 L/yr |
Shift Incharge
23
salaries
| ₹2.3 L/yr - ₹5.5 L/yr |
Instrument Engineer
20
salaries
| ₹2 L/yr - ₹6 L/yr |
RIG Mechanic
19
salaries
| ₹2 L/yr - ₹4.5 L/yr |
HR Executive
15
salaries
| ₹2.2 L/yr - ₹3.5 L/yr |
Aban Offshore
Cairn Energy
Nayara Energy
GAIL