Add office photos
Filter interviews by
Jindal Shadeed Iron & Steel Engineer Trainee Interview Questions and Answers
Jindal Shadeed Iron & Steel Engineer Trainee Interview Experiences
2 interviews found
Anonymous
I applied via Naukri.com and was interviewed in Jan 2024. There were 2 interview rounds.
General mathematics and Language ability testing mcqs
(1 Question)
- Q1. 1) Describe the process of steel making 2) DRI 3) Electric arc furnace 4) types of hydrogen
- Ans.
Steel making is a process that involves converting iron ore into steel through various methods.
The process of steel making involves several steps such as iron ore extraction, iron ore processing, and steel production.
Iron ore is extracted from mines and then processed to remove impurities.
The processed iron ore is then combined with coke and limestone in a blast furnace.
The blast furnace heats the mixture to high tempe...
Gate Mechanical type questions.
(3 Questions)
- Q1. Tell me about yourself
- Q2. What are your expectations
- Q3. How do we think that you won't leave us for something else
(3 Questions)
- Q1. Just one more round of Getting you better
- Q2. How is steel manufacturing done
- Ans.
Steel manufacturing involves the process of converting iron ore into steel through various stages of production.
Iron ore is first mined and then refined to remove impurities.
The refined iron ore is then combined with coal and limestone in a blast furnace to create molten iron.
The molten iron is further processed in a basic oxygen furnace or an electric arc furnace to remove excess carbon and other impurities, resulting...
- Q3. Some more details about steel industry
Interview Preparation Tips
Also read about the steel making.
They are currently hiring like anything so unless you screw up they would hire you.
Top trending discussions
Interview questions from similar companies
Selected
I applied via campus placement at Sri Krishna College of Engineering and Technology, Coimbatore and was interviewed in Jul 2024. There were 2 interview rounds.
Basic level aptitude
(2 Questions)
- Q1. Density of water
- Ans.
Density of water is 1 g/cm³ at 4 degrees Celsius.
Density of water is 1 g/cm³ at 4 degrees Celsius.
Density of water varies with temperature and pressure.
Water is most dense at 4 degrees Celsius.
Density of water is lower in its solid form (ice) compared to its liquid form.
- Q2. Unit convertion and engineering questions domain related
Interview Preparation Tips
I applied via campus placement at Maulana Azad National Institute of Technology (NIT), Bhopal and was interviewed in Jan 2024. There were 2 interview rounds.
In test there was 8 sections total.in which 7 sections contain 7 questions each which was mainly aptitude, comprehensive,pie charts etc.., and 8 sections is regarding electrical engineering,30 questions for 30 minutes
We 29 people got selected for group discussion.they divided 3 groups each contains 10 members.our group discussion topic was what India should do to a electrical vehicle sustainable country by 2030?
Interview Preparation Tips
- Introduction, projects,
- Intership
- Power System
- Electrical Machines
Selected
I was interviewed before Feb 2023.
Easy question on English, reasoning and machanics
Prepare current affairs topic
(2 Questions)
- Q1. Question on cv, project, internship
- Q2. Prepare basic questions on thermo,ore etc
Selected
I applied via Recruitment Consulltant and was interviewed before May 2022. There were 2 interview rounds.
(2 Questions)
- Q1. A job description with the GM of the plant
- Q2. The Questions are related to the education and experience related to the branch you belong and salary expectation
Interview Preparation Tips
Selected
I applied via Referral and was interviewed before Aug 2022. There were 2 interview rounds.
(2 Questions)
- Q1. Basic questions regarding personality and education
- Q2. Why a specific trade
- Ans.
I chose this specific trade because of my passion for problem-solving and hands-on work in this field.
I have always been fascinated by the intricacies of this trade
I enjoy the challenge of troubleshooting and finding solutions
I have relevant experience or education in this specific trade
I see great potential for growth and advancement in this field
Interview Preparation Tips
I applied via Approached by Company and was interviewed in Oct 2024. There were 2 interview rounds.
(4 Questions)
- Q1. Newton law of motion
- Ans.
Newton's laws of motion describe the relationship between an object and the forces acting on it.
First law: An object at rest stays at rest, and an object in motion stays in motion unless acted upon by an external force.
Second law: The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
Third law: For every action, there is an equal and opposite reactio...
- Q2. What is omhs law and formula
- Ans.
Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to the resistance.
Ohm's Law formula: V = I * R (Voltage = Current * Resistance)
Current (I) is measured in Amperes (A)
Voltage (V) is measured in Volts (V)
Resistance (R) is measured in Ohms (Ω)
Example: If a circuit has a voltage of 12V and a resistance of 4Ω, the current flowing throu
- Q3. Reading the English book and writing in this page
- Q4. Flaming ke baye hath ka niyam
(2 Questions)
- Q1. Resistance working
- Q2. Name of transformer in hindi language
- Ans.
The name of transformer in Hindi language is 'ट्रांसफार्मर'.
The word 'transformer' is translated to 'ट्रांसफार्मर' in Hindi.
It is pronounced as 'traans-faar-mer' in Hindi.
In written form, it is represented as 'ट्रांसफार्मर'.
Interview Preparation Tips
- Instruments
Somamanikumar Gandee
(2 Questions)
- Q1. A beam is hinged on both ends and a load is applied in between what are the additional thing we can do to reduce the deformation
- Ans.
To reduce deformation in a beam hinged on both ends with a load applied in between, additional measures can be taken.
Increase the beam's cross-sectional area to improve stiffness
Use materials with higher modulus of elasticity
Add support columns or braces to reduce bending
Distribute the load more evenly along the beam
Reduce the span length of the beam for better support
- Q2. Types of gears and name them
- Ans.
Types of gears include spur gears, helical gears, bevel gears, worm gears, and rack and pinion gears.
Spur gears have straight teeth and are the most common type of gear.
Helical gears have angled teeth for smoother and quieter operation.
Bevel gears have cone-shaped teeth and are used to change the direction of rotation.
Worm gears have a screw-like appearance and provide high gear reduction ratios.
Rack and pinion gears c
(2 Questions)
- Q1. Self introduction
- Q2. Why you wanna join
Interview Preparation Tips
Jindal Shadeed Iron & Steel Interview FAQs
Tell us how to improve this page.
Jindal Shadeed Iron & Steel Interviews By Designations
Interview Questions for Popular Designations
- Graduate Engineer Trainee (Get) Interview Questions
- Diploma Trainee Engineer Interview Questions
- Apprentice Trainee Interview Questions
- Apprenticeship Trainee Interview Questions
- Trainee Interview Questions
- Graduate Apprentice Trainee Interview Questions
- Graduate Apprenticeship Trainee Interview Questions
- Management Trainee Interview Questions
- Show more
Jindal Shadeed Iron & Steel Engineer Trainee Interview Process
based on 2 interviews
Interview experience
Engineer Trainee Interview Questions from Similar Companies
|
Deputy Manager
35
salaries
|  ₹15 L/yr - ₹32 L/yr |
|
Assistant Manager
20
salaries
| ₹12.2 L/yr - ₹27 L/yr |
|
Manager
9
salaries
| ₹24 L/yr - ₹40 L/yr |
|
Assistant General Manager
8
salaries
| ₹35 L/yr - ₹51 L/yr |
|
Shift Incharge
5
salaries
| ₹18 L/yr - ₹25 L/yr |
Tata Steel
JSW Steel
Steel Authority Of India
ArcelorMittal Nippon Steel
- Home >
- Interviews >
- Jindal Shadeed Iron & Steel Interview Questions >
- Jindal Shadeed Iron & Steel Engineer Trainee Interview Questions
