i
Hikal
Filter interviews by
I was interviewed before Dec 2022.
PLC/DCS system stands for Programmable Logic Controller/Distributed Control System. It is a computerized control system used in industrial automation.
PLC is a type of industrial digital computer used for controlling manufacturing processes.
DCS is a control system used to control complex, large-scale processes in industries such as power plants and oil refineries.
PLC is more suitable for discrete control applications, w...
Types of heat exchangers include shell and tube, plate, and finned tube.
Shell and tube heat exchangers have a shell with tubes inside for fluid exchange.
Plate heat exchangers use plates to transfer heat between fluids.
Finned tube heat exchangers have tubes with fins attached to increase surface area for heat transfer.
I applied via Walk-in
I applied via Naukri.com and was interviewed in Mar 2021. There was 1 interview round.
I have worked with various processes and equipment in my previous roles.
I have experience with process optimization and improvement.
I have worked with equipment maintenance and troubleshooting.
I have used software tools for data analysis and reporting.
I have trained team members on process and equipment usage.
I have implemented safety protocols and procedures.
Examples: Lean Six Sigma methodologies, CNC machines, data a
I have experience working with pressurized water reactors (PWR) and boiling water reactors (BWR).
Pressurized water reactors (PWR)
Boiling water reactors (BWR)
To apply heating, cooling, chilling, and brine to reactor, I will use appropriate equipment and control systems.
Select appropriate equipment for heating, cooling, chilling, and brine application
Install and connect the equipment to the reactor
Set up control systems to regulate the temperature and flow rate of the heating, cooling, chilling, and brine
Monitor the process to ensure the desired temperature and flow rate is ...
I have handled various solvents including acetone, ethanol, and methanol. I am familiar with their boiling points and densities.
Acetone - boiling point: 56.05°C, density: 0.789 g/cm³
Ethanol - boiling point: 78.37°C, density: 0.789 g/cm³
Methanol - boiling point: 64.7°C, density: 0.7918 g/cm³
The equations I use for charging lot into the reactor depend on the type of lot and the reactor design.
Equations vary based on lot type and reactor design
Factors such as temperature, pressure, and flow rate must be considered
Examples of equations include mass balance equations and energy balance equations
Top trending discussions
I applied via Referral and was interviewed before Aug 2021. There were 2 interview rounds.
posted on 21 Jul 2020
I applied via Walk-in and was interviewed before Jul 2019. There were 4 interview rounds.
I applied via Referral and was interviewed before Jun 2020. There were 3 interview rounds.
posted on 3 Apr 2022
I applied via Walk-in and was interviewed in Mar 2022. There were 4 interview rounds.
What is myself?
posted on 24 Apr 2022
posted on 7 Jun 2024
I applied via Walk-in and was interviewed before Jun 2023. There were 2 interview rounds.
15 general knowledge questions
Pressure is the force applied perpendicular to the surface of an object per unit area.
Pressure is defined as force per unit area
It is measured in units such as pascals (Pa) or pounds per square inch (psi)
Pressure can be exerted by gases, liquids, or solids
Examples include atmospheric pressure, blood pressure, and tire pressure
Temperature is a measure of the average kinetic energy of the particles in a substance.
Temperature is measured in units such as Celsius, Fahrenheit, or Kelvin.
It determines how hot or cold a substance is.
Temperature affects various physical and chemical properties of substances.
Examples: Water boils at 100 degrees Celsius and freezes at 0 degrees Celsius.
Higher temperatures usually result in faster particle movement an
posted on 26 Mar 2023
RMG end point is the final destination or target of a Resource Management Group (RMG) process.
RMG end point refers to the ultimate goal or outcome of a Resource Management Group process.
It is the desired result or objective that the RMG process aims to achieve.
For example, in a project management context, the RMG end point could be the successful completion of a project within the allocated resources and timeline.
Drying is done when the material is completely free of moisture and has reached the desired level of dryness.
Check the moisture content of the material using a moisture meter.
Observe the physical characteristics of the material, such as color, texture, and weight. If the material appears dry and feels lightweight, it may be fully dried.
Monitor the drying time. If the material has been drying for the recommended duratio...
RMG principle stands for Risk Management Group principle.
RMG principle is a risk management approach used in various industries.
It involves identifying, assessing, and mitigating risks to achieve organizational objectives.
The principle emphasizes proactive risk management rather than reactive measures.
RMG principle helps in minimizing potential losses and maximizing opportunities.
It involves creating risk management st...
FBP principles refer to the principles of Function-Behavior-Purpose, which are used in systems engineering to analyze and design systems.
FBP principles are used in systems engineering to analyze and design systems.
Function refers to the purpose or role of a component or system.
Behavior refers to the actions or operations performed by the component or system.
Purpose refers to the overall objective or goal of the compone...
Sifter principles are a set of guidelines or criteria used to filter or sort information or data.
Sifter principles are used to separate relevant information from irrelevant information.
They help in organizing and prioritizing data based on specific criteria.
Examples of sifter principles include relevance, accuracy, timeliness, and credibility.
For instance, when conducting research, one may use sifter principles to dete...
Multimill is a set of principles for managing multiple projects simultaneously.
Multimill emphasizes on prioritizing projects based on their importance and urgency.
It also focuses on effective communication and collaboration among team members.
Multimill encourages the use of project management tools and techniques to streamline processes.
Examples of such tools include Gantt charts, Kanban boards, and agile methodologies...
Some of the top questions asked at the Hikal Junior Officer interview -
based on 1 interview
Interview experience
based on 60 reviews
Rating in categories
Officer
516
salaries
| ₹0 L/yr - ₹0 L/yr |
Production Officer
257
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Officer
234
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive
221
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
157
salaries
| ₹0 L/yr - ₹0 L/yr |
Aarti Industries
Suven Life Sciences
Laurus Labs
Granules India