Upload Button Icon Add office photos

Forvia Hella

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Forvia Hella System Engineer Interview Questions and Answers

Updated 7 May 2024

Forvia Hella System Engineer Interview Experiences

1 interview found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
-
Result
Selected Selected

I applied via Referral and was interviewed in Apr 2024. There were 3 interview rounds.

Round 1 - Technical 

(3 Questions)

  • Q1. Explain about V cycle
  • Ans. 

    V cycle is a software development model where each phase is completed before moving to the next, resembling the shape of a 'V'.

    • V cycle consists of two major phases - the left side of the 'V' represents the development phase, while the right side represents the testing phase.

    • Requirements are gathered at the top of the 'V', followed by design, implementation, and testing phases.

    • Each phase must be completed before progres...

  • Answered by AI
  • Q2. What is regression testing
  • Ans. 

    Regression testing is the process of retesting a software application to ensure that new code changes have not adversely affected existing functionality.

    • Regression testing is performed after code changes to verify that the existing functionality still works correctly.

    • It helps in identifying any defects introduced by new code changes.

    • Automated testing tools are often used to streamline the regression testing process.

    • Reg...

  • Answered by AI
  • Q3. What is boundary value analysis
  • Ans. 

    Boundary value analysis is a software testing technique where test cases are designed around the boundaries of input ranges.

    • Focuses on testing at the boundaries of input ranges

    • Helps identify errors that occur at boundaries

    • Reduces the number of test cases needed

    • Examples: testing a range of 1-10 would include test cases for 0, 1, 10, and 11

  • Answered by AI
Round 2 - Behavioral 

(2 Questions)

  • Q1. Explain about previous company roles
  • Q2. Basics question about Electronic ex..ADC
Round 3 - HR 

(1 Question)

  • Q1. Salary discussion

Interview questions from similar companies

I applied via Walk-in and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Depends on experience
  • Q2. Related to systematic approach
  • Ans. Problem solving tools, OEE, FPY, Root cause analysis. 14Q, 5S
  • Answered Anonymously

Interview Preparation Tips

Interview preparation tips for other job seekers - Never join Bosch chakan if want to have growing future In career and work life balance.

I applied via Campus Placement and was interviewed before Jul 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Basics about the education and knowledge

Interview Preparation Tips

Interview preparation tips for other job seekers - They hire in rnd very easily ...not a big task..

I applied via Naukri.com and was interviewed before Jul 2020. There were 5 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. How can you satisfy your job
  • Q2. With hardwork and my experience

Interview Preparation Tips

Interview preparation tips for other job seekers - Wor

Interview Questionnaire 

1 Question

  • Q1. Questions were based on CV

Interview Preparation Tips

Interview preparation tips for other job seekers - Be true to what you've mentioned in your CV
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 6 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Specified to the functional area by section head
Round 3 - Technical 

(1 Question)

  • Q1. Core QA questions by department head
Round 4 - Technical 

(1 Question)

  • Q1. Core QA questions by Plant Manager
Round 5 - HR 

(1 Question)

  • Q1. Some character analysis questions by HR head
Round 6 - Case Study 

Introduction and few case study intraction with MD sir

Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Line balancing & cycle time study
  • Q2. Manpower handling

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Telephonic Call 

(1 Question)

  • Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
Round 3 - Panel interview 

(2 Questions)

  • Q1. Current job role and responsibilities.
  • Q2. What is Tempering? Material science questions
Round 4 - One-on-one 

(2 Questions)

  • Q1. Interview with VP India.
  • Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your profile well. Brush up on Mechanical engineering topics

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. Q1. What is the latest version of PPAP?
  • Ans. 

    The latest version of PPAP is PPAP 4th Edition.

    • PPAP stands for Production Part Approval Process.

    • The 4th Edition of PPAP was released in 2006.

    • It is a standardized process in the automotive industry to ensure that suppliers meet the requirements for production parts.

    • PPAP includes documentation such as design records, engineering change documents, and control plans.

    • It also involves conducting various tests and measurement...

  • Answered by AI
  • Q2. Q2. What is Fmea & why it is used during development?
  • Ans. 

    FMEA is a method used during development to identify and mitigate potential failures in a system or process.

    • FMEA stands for Failure Mode and Effects Analysis.

    • It is a systematic approach to identify and prioritize potential failures in a system or process.

    • FMEA helps in understanding the potential causes and effects of failures.

    • It is used to assess the severity, occurrence, and detectability of failures.

    • By analyzing fail...

  • Answered by AI
  • Q3. What is DVP&R ?
  • Ans. 

    DVP&R stands for Design Verification Plan and Report. It is a process used to ensure that a product meets its design specifications.

    • DVP&R is a structured approach to testing and validating a product's design.

    • It involves creating a plan for testing the product, executing the tests, and documenting the results.

    • The plan includes details such as the test objectives, test methods, acceptance criteria, and test schedule.

    • The ...

  • Answered by AI
  • Q4. What is the value of NDC & we take the this value..??
  • Ans. 

    NDC stands for National Drug Code. It is a unique identifier for drugs in the United States.

    • NDC is a 10-digit code that identifies drugs, including prescription and over-the-counter medications.

    • The first segment of the NDC represents the labeler code, which identifies the manufacturer or distributor of the drug.

    • The second segment represents the product code, which identifies the specific drug formulation and strength.

    • T...

  • Answered by AI
  • Q5. At which stage the Npd work of PPAP File making is done?
  • Ans. 

    PPAP file making is done during the production validation stage of NPD work.

    • PPAP file making is a part of the production validation process in NPD work

    • It involves documenting the production process and ensuring it meets customer requirements

    • PPAP file making is typically done after the design and development stages

    • It includes documentation such as control plans, process flow diagrams, and inspection records

  • Answered by AI
  • Q6. How many ppm in 6 sigma..?
  • Ans. 

    The ppm in 6 sigma is 3.4 defects per million opportunities (DPMO).

    • 6 sigma aims for a defect rate of 3.4 DPMO.

    • PPM stands for parts per million.

    • DPMO is a measure of process performance.

    • The lower the DPMO, the better the process performance.

    • Achieving 6 sigma means having a process that produces 99.99966% defect-free output.

  • Answered by AI
  • Q7. Problem solving tools & describe pareto chart & why we use it..?
  • Ans. 

    Pareto chart is a problem-solving tool used to identify and prioritize the causes of a problem.

    • Pareto chart is a bar graph that displays the relative frequency or size of problems in descending order of importance.

    • It helps to identify the vital few causes that account for the majority of the problems.

    • It is based on the Pareto principle, also known as the 80/20 rule, which states that 80% of the effects come from 20% of...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give interview with full confidence either u r wrong or right .

I applied via Referral and was interviewed before Nov 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(3 Questions)

  • Q1. Process related questions ,.
  • Q2. How to manage spares.
  • Ans. 

    Spares management involves inventory control, procurement, and maintenance planning.

    • Create a detailed inventory of all spares and their usage frequency.

    • Establish a procurement process that ensures timely availability of spares.

    • Implement a maintenance plan that includes regular inspection and replacement of spares.

    • Use technology such as barcoding and RFID to track spares and prevent loss or theft.

    • Regularly review and up...

  • Answered by AI
  • Q3. How to manage shift issue
  • Ans. 

    Shift issues can be managed by effective communication, proper scheduling, and providing necessary resources.

    • Establish clear communication channels between team members and management

    • Create a schedule that takes into account employee preferences and availability

    • Ensure that all necessary resources are available for each shift

    • Regularly review and adjust the schedule as needed

    • Provide training and support for employees to ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Need wiring harness process and about knowledge. Interview not though.
Contribute & help others!
anonymous
You can choose to be anonymous

Forvia Hella Interview FAQs

How many rounds are there in Forvia Hella System Engineer interview?
Forvia Hella interview process usually has 3 rounds. The most common rounds in the Forvia Hella interview process are Technical, Behavioral and HR.

Recently Viewed

INTERVIEWS

Forvia Hella

No Interviews

INTERVIEWS

Neilsoft

No Interviews

INTERVIEWS

Druva

No Interviews

INTERVIEWS

Druva

No Interviews

SALARIES

Vuram

INTERVIEWS

Forvia Hella

No Interviews

INTERVIEWS

Forvia Hella

No Interviews

SALARIES

Druva

INTERVIEWS

Forvia Hella

10 top interview questions

SALARIES

Druva

Tell us how to improve this page.

Forvia Hella System Engineer Interview Process

based on 1 interview

Interview experience

4
  
Good
View more

Interview Questions from Similar Companies

Maruti Suzuki Interview Questions
4.2
 • 600 Interviews
Bosch Interview Questions
4.2
 • 334 Interviews
Hero MotoCorp Interview Questions
4.1
 • 333 Interviews
TVS Motor Interview Questions
4.0
 • 310 Interviews
Varroc Group Interview Questions
3.6
 • 174 Interviews
Exide Industries Interview Questions
3.5
 • 167 Interviews
Spark Minda Interview Questions
3.9
 • 121 Interviews
Hitachi Astemo Interview Questions
4.1
 • 103 Interviews
JK Tyres Interview Questions
3.7
 • 93 Interviews
Valeo Interview Questions
4.0
 • 88 Interviews
View all
Forvia Hella System Engineer Salary
based on 7 salaries
₹2 L/yr - ₹10.1 L/yr
At par with the average System Engineer Salary in India
View more details
Senior Engineer
253 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
160 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Technical Lead
131 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Software Engineer
101 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Design Engineer
97 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Forvia Hella with

Bosch

4.2
Compare

Spark Minda

3.9
Compare

Varroc Group

3.6
Compare

Exide Industries

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview