HARMAN Senior Technical Lead Interview Questions and Answers

Q1. PLC, VFD, sensors, robot knowledge, Any language like C++, Python is additional advantage, mobile industry knowledge could also provide advantage
Add your answer

Q1. About yourself followed by one more technical round basically asking technical part from previous company
Add your answer

Q1. What are your salary expectations?
Add your answer
Q2. Share details of your previous job.
Add your answer
Q3. Tell me about yourself.
Add your answer

Q1. Questiones based on past experience and projects
Add your answer
Q2. Reason for switching the job
Add your answer
Q3. Knowledge of CAD softwares
Add your answer

Q1. What is sub cooling in air conditioning?
Ans. 
Sub cooling in air conditioning is the process of cooling the refrigerant below its saturation temperature to improve system efficiency.
• Sub cooling increases the efficiency of the air conditioning system by ensuring the refrigerant is in a liquid state before entering the expansion valve.

• It helps in preventing flash evaporation of the refrigerant, which can lead to inefficiencies in the system.

• Sub cooling is typically ...read more
Answered by AI
View 2 more answers
Q2. How is ISEER rating calculated
Ans. 
ISEER rating is calculated based on the weighted average of the cooling performance of an air conditioner under different conditions.
• ISEER = (Weighted Cooling Capacity at 100% load x 0.4) + (Weighted Cooling Capacity at 75% load x 0.2) + (Weighted Cooling Capacity at 50% load x 0.4)

• The higher the ISEER rating, the more energy efficient the air conditioner is.

• ISEER rating helps consumers compare the energy efficiency of...read more
Answered by AI
Add your answer
Q3. Draw the Refrigeration cycle
Ans. 
The refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature to a high temperature environment.
• The cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.

• The refrigerant enters the compressor as a low-pressure gas and leaves as a high-pressure, high-temperature gas.

• The high-pressure gas then flows into...read more
Answered by AI
Add your answer
Q4. Mainstream refrigerants used in household air conditioning
Ans. 
Mainstream refrigerants used in household air conditioning include R-410A, R-22, and R-134a.
• R-410A is a popular refrigerant known for its high efficiency and environmental friendliness.

• R-22, although being phased out due to its ozone-depleting properties, is still commonly found in older air conditioning systems.

• R-134a is commonly used in automotive air conditioning systems but can also be found in some household units
Answered by AI
View 1 more answer
Q5. Explain 1 ton cooling concept
Ans. 
1 ton cooling concept refers to the amount of heat required to melt one ton of ice in a 24-hour period.
• 1 ton of cooling is equal to 12,000 BTUs per hour

• It is commonly used in the HVAC industry to measure the cooling capacity of air conditioning systems

• For example, a 2-ton air conditioner can remove 24,000 BTUs of heat per hour
Answered by AI
Add your answer
Q6. Relation between current, voltage and power
Ans. 
The relationship between current, voltage, and power is described by Ohm's Law, which states that current is directly proportional to voltage and inversely proportional to resistance.
• Ohm's Law states that V = I * R, where V is voltage, I is current, and R is resistance.

• Power (P) is calculated using the formula P = V * I, where P is power, V is voltage, and I is current.

• In a circuit with a constant resistance, an increa...read more
Answered by AI
Add your answer
Q7. Conversion from BTU to watts and vice versa
Ans. 
1 BTU is approximately equal to 0.29307107 watts. To convert BTU to watts, multiply by 0.29307107. To convert watts to BTU, divide by 0.29307107.
• 1 BTU = 0.29307107 watts

• To convert BTU to watts, multiply by 0.29307107

• To convert watts to BTU, divide by 0.29307107
Answered by AI
Add your answer

Q1. No questions just test
Add your answer

Q1. Would you be comfortable to regularly work extra hours?
Add your answer
Q2. Introduction about yourself?
Add your answer
Q3. Why do you want to join LG/ consumer durable industry?
Add your answer
Q4. If your manager and colleagues are busy with work , how will you manage to learn the things from them?
Add your answer
Q5. Present Salary and expected salary
Add your answer

1 hour - Trees, Array, Hashmap, DP, CP etc

Q1. Project discussion
Add your answer

Q1. Past experience and salary exp.
Add your answer

Q1. Kpi and past exp disc.
Add your answer

Q1. Technical about plastic and sheet metal
Add your answer
Q2. Types of process
Ans. 
Types of process include batch process, continuous process, and hybrid process.
• Batch process involves processing a set amount of materials at one time

• Continuous process involves ongoing production without interruption

• Hybrid process combines elements of both batch and continuous processes
Answered by AI
Add your answer

Q1. How to increase efficiency of product
Ans. 
Increasing product efficiency can be achieved through optimizing processes, improving technology, and enhancing employee skills.
• Optimize production processes to eliminate waste and improve workflow

• Upgrade technology to automate tasks and improve accuracy

• Provide training and development opportunities for employees to enhance their skills and knowledge
Answered by AI
Add your answer
Q2. What will you change in the product
Ans. 
I would improve the user interface to enhance user experience and streamline navigation.
• Enhance user interface design for better usability

• Streamline navigation to improve user experience

• Implement user feedback to make necessary changes

• Optimize performance for faster loading times
Answered by AI
Add your answer

Q1. Technical abt your exp
Add your answer

Q1. Hod check ur confidence n general screening
Ans. 
I am confident in my abilities and have a strong track record of success in my field.
• I have a proven track record of delivering high-quality work on time and within budget.

• I am comfortable taking on new challenges and learning new skills.

• I am confident in my ability to work independently or as part of a team.

• I am always looking for ways to improve my skills and knowledge.

• I am confident in my ability to communicate effe
Answered by AI
Add your answer

Q1. Salary negotiation
Add your answer